Hondakiller
Well-known member
Ok I ground the terminal to adjust ignition timing. With a timing light set to 5 degrees at idle. I have a scanmaster 3 on the ignition timing it reading 17-20 degrees adv. at idle. Is that normal? Or should the scanmaster read 5 degrees at idle as well. The car has idle surge. If I try to adjust the ignition timing with the scanmaster I can only bring the degrees down to 8 and I run out of adjustment. But when I do that the idle surge stops and runs ok. But I dont recall the CAS all the way back like that. I was pretty sure it was about half way it adjustment. Has anyone have the same problem?
Thanks
Matt
Thanks
Matt