I've tried, they're NLA. Well, at least the bushings are. I don't know about the brackets. I bought some bushings from Rock Auto that were supposedly for a manual rack, but they ended up being for a power rack. Same thing with the bellows. That's how I know they're different /ubbthreads/images/graemlins/grin.gif Best bet is to grab the rack, bushings, and brackets from a junkyard (or maybe just the bushings and brackets if you're getting a remanned unit.) If you need bellows, the passenger side on the manual rack is a different diameter than the power rack. Take your rack to the parts store and make sure they have the right kit.
Just so you know, the manual rack bushings DO NOT have any place for the hydraulic lines to pass through. On DSMs w/power steering there is a hole that one of the lines runs through on the passenger side bushing. For Galant VR4s with AWS there are two holes for two lines to pass through on the passenger side. This is how you can know you ended up with the right bushings.