hello freinds. i have been off the fourm for about a year and a half two years. i first got my galant when i was 15. no trans. blown stock motor. my brother bought it from ivan at sound performance two years prior. took him two years two destroy it....two accidents and a trans and block and two turbos.ive owned this car for 4 years now as an off and on project. invested 8k and still increasing everyday. i just lost my job so ive had time to play around the last two weeks and i figured i should jump back on the fourum and let you guys get a update on 1119/2000. enjoy /ubbthreads/images/graemlins/smirk.gif
Engine mods:
Bone stock 4g63T aprox 80k.
New ngk plugs and wires
shaved and polished stock intake manifold with cyclone throttle body 2g inlet
New hoses,belts,gaskets,bolts, new starter
Intake mods:
Garett Bullseye T3/T4
2.5" intercooler pipeing
Front mount 27.5"/10"/2" i believe
GM MAF blowthrough
Fuel Mods:
Aermotive 10 gal Fuel cell
Aermotive 8an lines throughout
Aeromotive tsunami fuel pump
Aeromotive fuel press regulator
Aermotive fuel Rail
DC 550cc injectors
Drivetrain:
steel braide clutch line
new cvs(4)
2g Eclipse GSX trans aprox 64k
act 2100
new clutch slave
fidanza short shifter
cnc machined shifter plate bushings
shifter cable bearing conversion kit
Exhaust:
AMS 3 1/4" full catback with catco high flow cat
Dynomax muffler
Stock exhuast manifold (for now)
Suspension and Brakes:
New kyb gr2 struts
two front wheel bearings
sway bar links
inner and outer tie rods
ebc green stuff pads
front steek braide brake lines
new oem rear lines
cusco strut bars
New dunlop sp a2 sports
Now the fun stuff
2 weeks ago
Today at 3am.
I still need to cut about 2 1/2 inches off the passenger side. make mounts. trim the driver side and also mount the front mount. oh yeah...finish painting them.
and other parts.....
i went to ams today and asked where i shoul go for this...two striped holes...1 broken bolt...and only 500 miles on the turbo /ubbthreads/images/graemlins/banghead.gif
Other Vehicles:
1983 chevrolet S10- 350/TH350 trans mid length headers full 2 1/4 true duals with glass packs. 750 edelbrock-edelbrock performer cam and intake mani. accel plugs wires heat shields and distributer. accel super high voltage coil(55k i think)
Brothers 92' 522/1000 In progress as well( stock build)
10th anniversary 99 eclipse rs. auto. non turbo. black interior leather. flip out. new speakers. z3 fendors. and a front lip thats already cracked. apexi catback
Engine mods:
Bone stock 4g63T aprox 80k.
New ngk plugs and wires
shaved and polished stock intake manifold with cyclone throttle body 2g inlet
New hoses,belts,gaskets,bolts, new starter
Intake mods:
Garett Bullseye T3/T4
2.5" intercooler pipeing
Front mount 27.5"/10"/2" i believe
GM MAF blowthrough
Fuel Mods:
Aermotive 10 gal Fuel cell
Aermotive 8an lines throughout
Aeromotive tsunami fuel pump
Aeromotive fuel press regulator
Aermotive fuel Rail
DC 550cc injectors
Drivetrain:
steel braide clutch line
new cvs(4)
2g Eclipse GSX trans aprox 64k
act 2100
new clutch slave
fidanza short shifter
cnc machined shifter plate bushings
shifter cable bearing conversion kit
Exhaust:
AMS 3 1/4" full catback with catco high flow cat
Dynomax muffler
Stock exhuast manifold (for now)
Suspension and Brakes:
New kyb gr2 struts
two front wheel bearings
sway bar links
inner and outer tie rods
ebc green stuff pads
front steek braide brake lines
new oem rear lines
cusco strut bars
New dunlop sp a2 sports
Now the fun stuff
2 weeks ago
Today at 3am.
I still need to cut about 2 1/2 inches off the passenger side. make mounts. trim the driver side and also mount the front mount. oh yeah...finish painting them.
and other parts.....
i went to ams today and asked where i shoul go for this...two striped holes...1 broken bolt...and only 500 miles on the turbo /ubbthreads/images/graemlins/banghead.gif
Other Vehicles:
1983 chevrolet S10- 350/TH350 trans mid length headers full 2 1/4 true duals with glass packs. 750 edelbrock-edelbrock performer cam and intake mani. accel plugs wires heat shields and distributer. accel super high voltage coil(55k i think)
Brothers 92' 522/1000 In progress as well( stock build)
10th anniversary 99 eclipse rs. auto. non turbo. black interior leather. flip out. new speakers. z3 fendors. and a front lip thats already cracked. apexi catback