Chim55117
Well-known member
I accept PayPal, you add 3% fees, or send as a gift. Shipping is done through USPS. Prices do not include shipping, and will be done on a case by case basis.
"Indy Race Core" 1G Short Route FMIC kit. Powercoated piping. The core of this kit is a Spearco core, one of the nicest kits you get could back in the day. Piping could use a little refinishing.
BOV in picture not included. Does require some trimming. Dimensions are 28 x 10 x 3.5.
$400
link
link
link
link
2G O2 housing, professionally port matched to an EVO 3 16G hotside.
$65.
link
JMF Heatshield, could use a good polishing.
$40 .
EVO 3 exhaust manifold, no cracks, hole tapped for EGT, but plugged off.
$80 .
link
Accel 8MM spark wires -
$20 .
link
NGR FPR w/gauge and rail adapter -
$80
link
Also have but not pictured...
1x 1G EPROM ECU - $175
1x GVR-4 EPROM ECU - $175
KYB AGX's with Eibach Springs - $500
Megan 3" turbo back exhaust - $350
Greddy Profec B (blue/clear housing) - $175
Greddy 60MM EGT - $75
Stewart Warner 0-40PSI boost gauge 60MM - $40
4 Bolt Rear End w/Axles - $275
Denso 550CC injectors - $100
5 Lug Swap for VR-4 - $100
link
PM me regarding any body/interior parts you may need.
Items I'm willing to take as trades are decent 2G AWD suspension, AEM fuel rail, or FP intake pipe or 2G/EVO ECU flash cable.
Thanks for looking.
"Indy Race Core" 1G Short Route FMIC kit. Powercoated piping. The core of this kit is a Spearco core, one of the nicest kits you get could back in the day. Piping could use a little refinishing.
BOV in picture not included. Does require some trimming. Dimensions are 28 x 10 x 3.5.
$400
link
link
link
link
2G O2 housing, professionally port matched to an EVO 3 16G hotside.
$65.
link
JMF Heatshield, could use a good polishing.
$40 .
EVO 3 exhaust manifold, no cracks, hole tapped for EGT, but plugged off.
$80 .
link
Accel 8MM spark wires -
$20 .
link
NGR FPR w/gauge and rail adapter -
$80
link
Also have but not pictured...
1x 1G EPROM ECU - $175
1x GVR-4 EPROM ECU - $175
KYB AGX's with Eibach Springs - $500
Megan 3" turbo back exhaust - $350
Greddy Profec B (blue/clear housing) - $175
Greddy 60MM EGT - $75
Stewart Warner 0-40PSI boost gauge 60MM - $40
4 Bolt Rear End w/Axles - $275
Denso 550CC injectors - $100
5 Lug Swap for VR-4 - $100
link
PM me regarding any body/interior parts you may need.
Items I'm willing to take as trades are decent 2G AWD suspension, AEM fuel rail, or FP intake pipe or 2G/EVO ECU flash cable.
Thanks for looking.
Last edited: