I have tons of spares and unused parts from countless builds. Time to thin the stockpile for more room.I have so much random Mitsu parts I linked to my cl posts for pics. Any questions feel free to msg me or on here. Have paypal ready
click
Borla slip on exhaust, from downpipe to muffler/tip. 3in and loud. Coated in black. Complete from my gvr4. May fit others like 1g TEL. $300
Forged 6 bolt shortblock. Pulled from a gvr4. Has JE pistons/1G rods. Has been sitting for awhile, could use rehone. No oil pump $500
Buschur head. 2G core, extreme porting/bench work. +1 oversized valveseats, Cut down valve guides(bronze) made for making extreme power on a 4g63. Too much invested. $1000 steals it
JMF fab race manifold. Updated style, 1g/big port/n2 setup. Chromed and Polished $400
click
GReddy timing belt with balancer belt $200
click
-JDM vr4 block machined by Fp. (Back when Fp still was a performance shop and would do this for select customers.) Cleaner casting than normal, Hot tank'd; check for any cracks or flaws. Headgasket surface has been decked for use with MLS HG. .020 overbore set up specifically for Mitsu 2G pistons, comes with brand new OE 8:5-1 pistons (2G) and pins and rings. rings have not been gapped. Block comes with fp small block parts kit and bse bearing kit $800.greddy
-'90 1G head/topend. Unmolested lol. pulled from a running gsx and saved as a spare. comes complete from tb and intake to complete head with all valves and springs. basically a complete top end $400
-Frank Jr. "17c" turbo. TD05H turbine side with syclone/typhoon 17c compressor wheel. More power than a 16G with harder hitting mid range.(300-400hp) great street turbo $400
-TD06 TW and 13cm2 t3 housing. For those looking to step up past the 05h wheel and TH $300
-JDM VR4 intercooler. FMIC from overseas. bottom was hit when shipping, does not leak $150
-SRT4 FMIC. Factory IC thats been "trimmed" to fit in a vr4. currently in car $200
450cc injectors. set of 4 from a VR4 $100
-560 evo9 injectors freshly cleaned $150
660 denso injectors. great for race gas cars or for those wanting to max out their 05h turbos. recently
cleaned $200
HKS Vein pressure controller (VPC) and graphic control computer (GCC) For controlling 560cc/660cc or larger and deleating of the MAF (IAT+MAP conversion) Complete working shape with buschur chips for race gas, pump gas 660's $350
2G Intake manifold hot tank'd and cleaned $100
1G Intake manifold. modded with 2G MAP location, ported, decked and hot'tanked $100
3 bolt rear w/ LSD. Pulled from a VR4 complete with axels $300
94 AWD trans. Spare pulled with very low miles. $600
click
Borla slip on exhaust, from downpipe to muffler/tip. 3in and loud. Coated in black. Complete from my gvr4. May fit others like 1g TEL. $300
Forged 6 bolt shortblock. Pulled from a gvr4. Has JE pistons/1G rods. Has been sitting for awhile, could use rehone. No oil pump $500
Buschur head. 2G core, extreme porting/bench work. +1 oversized valveseats, Cut down valve guides(bronze) made for making extreme power on a 4g63. Too much invested. $1000 steals it
JMF fab race manifold. Updated style, 1g/big port/n2 setup. Chromed and Polished $400
click
GReddy timing belt with balancer belt $200
click
-JDM vr4 block machined by Fp. (Back when Fp still was a performance shop and would do this for select customers.) Cleaner casting than normal, Hot tank'd; check for any cracks or flaws. Headgasket surface has been decked for use with MLS HG. .020 overbore set up specifically for Mitsu 2G pistons, comes with brand new OE 8:5-1 pistons (2G) and pins and rings. rings have not been gapped. Block comes with fp small block parts kit and bse bearing kit $800.greddy
-'90 1G head/topend. Unmolested lol. pulled from a running gsx and saved as a spare. comes complete from tb and intake to complete head with all valves and springs. basically a complete top end $400
-Frank Jr. "17c" turbo. TD05H turbine side with syclone/typhoon 17c compressor wheel. More power than a 16G with harder hitting mid range.(300-400hp) great street turbo $400
-TD06 TW and 13cm2 t3 housing. For those looking to step up past the 05h wheel and TH $300
-JDM VR4 intercooler. FMIC from overseas. bottom was hit when shipping, does not leak $150
-SRT4 FMIC. Factory IC thats been "trimmed" to fit in a vr4. currently in car $200
450cc injectors. set of 4 from a VR4 $100
-560 evo9 injectors freshly cleaned $150
660 denso injectors. great for race gas cars or for those wanting to max out their 05h turbos. recently
cleaned $200
HKS Vein pressure controller (VPC) and graphic control computer (GCC) For controlling 560cc/660cc or larger and deleating of the MAF (IAT+MAP conversion) Complete working shape with buschur chips for race gas, pump gas 660's $350
2G Intake manifold hot tank'd and cleaned $100
1G Intake manifold. modded with 2G MAP location, ported, decked and hot'tanked $100
3 bolt rear w/ LSD. Pulled from a VR4 complete with axels $300
94 AWD trans. Spare pulled with very low miles. $600
Last edited: