Quoting cheekychimp:
Quoting 3rdstrikedsm:
You still have to swap final drives in either the trans or the rear diff and use either the e 1-3 t-case or a 97-99 2g t-case.
Yeah sorry, I was forgetting you guys had the 3.547 final ratio, the EVO 3 transfer case only works with the 3.909 rear end. The EVO 3 box is a peculiar animal though and is different from the EVO 1 and EVO 2 transmissions based upon my research, which means unless you are using the EVO 3 transfer case you MUST change the final drive in the transmission itself irrespective of which rear end you are using.
You CANNOT use an Evo III transfer case with anything other than an Evo III transmission. The Evo I-III all have 3.909 rear ends but the Evo III has a different ratio front diff to Evo I-II and the Evo III transfer case must be used to suit the 3.909 rear ratio.
So in order to use an Evo I-III gearbox in a Galant VR-4, all you need to do is ensure the rear diff has 3.909 crown wheel and pinion fitted but must ensure the transfer case matches the box you are using - ie you can't use an Evo III transfer case on an Evo I box and vice versa.