turbophein
Well-known member
i set the galant just like they showed on the videos. i have my maf at .24-.25 gr/rev and my combinedft are at 0-2%. i even did the drove around and used the adjust tool.
car idles great and all, but the problem is the car won't run when cold. my coolant temp sensor is working fyi. i have to play with the throttle big time and even then it won't accept much fuel...
couple questions?
are aftermarket cams(FP1) going to affect the base numbers that i should be targeting for? car seems to run good at .32 gm/rev by reducing by deadtime
also i think my deadtime settings are way off. to get the suggested reading i add 750 of deadtime.
am i missing something?
also when i change my MAS settings from a 2g to a evo Mas in ecmlink, the car runs better???
car idles great and all, but the problem is the car won't run when cold. my coolant temp sensor is working fyi. i have to play with the throttle big time and even then it won't accept much fuel...
couple questions?
are aftermarket cams(FP1) going to affect the base numbers that i should be targeting for? car seems to run good at .32 gm/rev by reducing by deadtime
also i think my deadtime settings are way off. to get the suggested reading i add 750 of deadtime.
am i missing something?
also when i change my MAS settings from a 2g to a evo Mas in ecmlink, the car runs better???
Last edited: