turbophein
Well-known member
so i installed a temp gauge a couple weeks ago and finally got the car running yesterday, and the gauge maxes out as soon as it gets power.
i did some searching and i am going to try a 2nd ground wire. also might be no coolant submerging the sensor yet, still burping the coolant.
my wires are connected right.
its mounted on the thermostat housing
any help would be great!
thanks
i did some searching and i am going to try a 2nd ground wire. also might be no coolant submerging the sensor yet, still burping the coolant.
my wires are connected right.
its mounted on the thermostat housing
any help would be great!
thanks
Last edited: