The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey. Login to browse without most ads.

WTB: JNZ short shifter for VR4

MX4

Well-known member
Joined
Apr 9, 2001
Messages
782
Location
New Zealand
You may know this already but you can get a GTO/3000GT/Stealth shifter and send it to JNZ for them to modify for you. Speak to them because it a specific model shifter from memory.
 

xe0

Member
Joined
Nov 9, 2012
Messages
13
Location
eugene, Oregon
I was in the same boat as you and I had to just pony up and buy a used 3gt shifter and send it into JNZ for the work. It was well worth the extra time/money and it came out perfect from jnz.
 

mcbride89

Well-known member
Joined
Dec 17, 2012
Messages
133
Location
Belmar,NJ
seems like the time you posted this till now you couldve had a short shifter from jnz awhile ago..
 

91GVR4#479

Well-known member
Joined
Jun 17, 2001
Messages
154
Location
New Hartford, N.Y. 13413
Where did you find the used 3000 GT shifter? I am looking, and what I see are aftermarket short throw shifters for the GT, not the original shifters. Thanks.
 

faqinshiet

Well-known member
Joined
Dec 6, 2011
Messages
545
Location
Charlottesville, Va
I did same hit up one of the 3000gt site for the part outs shifter should be stamped 93R. Then contact Jnz for details two for me took two weeks total.
 

blacksheep

Well-known member
Joined
May 1, 2002
Messages
15,485
Location
Urbandale, Iowa 50323
You can find 3KGT shifters on EBay. I got mine from a member here, shipped it to JNZ and they sent me the modded one in about 2 weeks. Its not that hard esp if you have time.
 

91GVR4#479

Well-known member
Joined
Jun 17, 2001
Messages
154
Location
New Hartford, N.Y. 13413
Thanks for your help. I signed on to the 3si.org website and posted in the wanted to buy section. Hopefully, someone will respond. I did look on eBay, and cannot find anything that is a stock 3KGT shifter. If anyone sees one, please point me in that direction. And, yes, I probably am as inept as I seem. I'd like to think that I have other talents, but this apparently is not one of them. Thanks guys.
 

Kibby

Well-known member
Joined
Jan 16, 2013
Messages
217
Location
Baltimore,MD
I took the short shifter and bushings out of my 92 gsx shell and everything bolted right up to my 91 gvr4.
 

Fukenvr4

Member
Joined
Feb 25, 2012
Messages
20
Location
Houston, tx
Quoting Kibby:
I took the short shifter and bushings out of my 92 gsx shell and everything bolted right up to my 91 gvr4.



Nice!.. Ill just do this
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top