Thread and fitting guide for 4G63 Cars

[Bimmubishi]

I think that there are a lot of questions on this subject and this might be a good resource for those making waterlines/oil lines for the mitsubishi turbo, oil lines for the oil cooler etc..

DSG 1

DSG 2


you can scroll through the menu. Please let me know if you find any bad information.

Thanks!

AL

Edit: Updated link

 

[GVR-4]

Alex, either you don't sleep or you don't have a girlfriend/wife or you don't have a job.

Thanks for the data.

 

[Bimmubishi]

I'll take "A" sleep for $100.

I have a 40hr/wk job, and a 20hr/wk job, full time player.

 

[blacksheep]

"Roll all day, ride all nite..."

That should be "playah", foo!

 

This should probably get stickied in the Tech section.

 

What would I do without this board? I know, I'd be paying some one some big time moolah for working on my ride. Good job Alex..

 

[stupidweirdo]

whats the thread of the oil cooler outlets on the oil filter housing? if ya know off hand, maybe something you could add

 

[Bimmubishi]

I believe that they are M16 * 1.5 thread. Someone tell me if I'm wrong.

 

How about fittings on the rubber brake hose between the front caliper and the steel brake line.....maybe then I could make my own SS brakelines.
thanks

 

[iceman69510]

All the brake line fittings are 10 x 1.0 mm

 

The above links are dead, so I'm substituting the following: 2G DSM bolt wizard

 

[Bimmubishi]

click