The Authoritative Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

FS: Vr4 JDM Manual seatbelts >> $79 <<

988

Well-known member
Joined
Feb 3, 2011
Messages
151
Location
Malaysia
Hai.... I have Complete Mitsubishi Galant Vr4 JDM Manual seatbelts, Sell $79 PAYPAL And Fees . Shipping Cost Must Check First, Thanks

Driver Side ( Right )


Passenger Side ( Left )


Center ( Rear )


Rear Driver Side ( Right )


Rear Passenger Side ( Left )


Already Take Out....

 

91_427

Well-known member
Joined
Apr 2, 2012
Messages
101
Location
South Jersey
B pillar upper and lower trim is required for this swap. A pillar trim and the headliner trim piece between a and b pillars is recommended as well for aesthetic reasons.
 

89Patches

Well-known member
Joined
Jan 30, 2013
Messages
723
Location
Ontario Canada
You don't want the pillar trim, trust me it's has some fuzzy sh*t on it from factory and is brown'ish. /ubbthreads/images/graemlins/uhh.gif
 

VR4Scott

Well-known member
Joined
Feb 9, 2008
Messages
582
Location
Orlando, FL, USA
I'll take the fronts but I need the plastic trim pieces as well.
 

988

Well-known member
Joined
Feb 3, 2011
Messages
151
Location
Malaysia
Have it, but not incluaded with seat belt, i will snap picture.... i can give it..... just wait /ubbthreads/images/graemlins/wink.gif
 

TurboDSM

Well-known member
Joined
Mar 7, 2012
Messages
58
Location
Merica
Ok cool, I'll probably take the trim since I called dibs
 

strokin4dr

Well-known member
Joined
Aug 30, 2005
Messages
2,768
Location
Savannah, GA
Way ahead of you. PM'd him shortly after he made the post. Waiting on a shipping quote for belts and trim.
 

TurboDSM

Well-known member
Joined
Mar 7, 2012
Messages
58
Location
Merica
Good thing Canada is close enough I can go to junkyards there
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top