FS: Huge collection of OEM Gaskets/Bolts/Seals

[lunchbox]

This is perfect for someone who used to work on DSMs like I did. Huge collection!

99% of this stuff is for 6 bolt 1Gs, so it should work on Galants as well.

**WITH PART NUMBERS**

Gates 21756 1 Upper radiator hose
Dayco 70783 1 Lower radiator hose
MD183240 1 Gasket, oil strainer
Stant 10227 1 Radiator Cap
MD040597 1 Bearing, Balance Shaft
MD706012 1 Bolt, T/M Connecting
MD103722 3 Bearing, Balance
MD302074 4 Bolt, Flywheel
MD343564 2 Oil Seal
MF241251 6 Bolt, Eng. Hanger
MD365697 1 Oil Seal
MD719710 1 Oil Seal
MD707184 1 Oil Seal
MD727944 1 O-Ring T/F
MD087060 8 Insulator, Fuel Injector
MD300101 1 Sensor, Eng Crank Angle
MD183243 1 Gaskt, Rear oil seal case
Concept Racing 1 Main Bearing Cap Alignment Dowels
MD731793 1 Oil Seal
MD132806 5 Bushing Cylinder Head
Chicago Rawhide 3930 3 Throttle Body Shaft Seals
MD040597 1 Bearing Bal Front
Gates 33489 1 Themostat
Mr. Gasket 1203 1 3" Collector Gasket
MD182295 1 Belt Balance Shaft
MD343563 2 Oil Seal Crankshaft
MD125940 2 Gasket rocker cover
MD365697 1 Oil Seal
MR244546 1 Seal Kit PS Pump
MR343565 1 Oil Seal
MD343564 1 Oil Seal
MS401452 2 Stud Cylinder Head
MS240211 4 Bolt, Crankshaft Pulley
MF241256 6 Bolt, Clutch Control
MB297860 2 Bolt, Fr Axle
MD098626 1 Oil Pump Stub Shaft
MD005317 9 Stud Cylinder Head
MD149370 2 Gasket, oil filter bracket
MR316383 12 Stop Rear Suspension
MD723202 1 Oil Seal
MU430002 2 Nut Fr Axle
MR241256 7 Bolt PS Oil Pump
MF241281 1 Bolt RR Susp Stabilizer
MD952233 6 Bolt AT Drive Plate
MF430123 2 Nut Eng RR
MS450992 1 Washer, Special
MD092806 9 Nut, Exhaust
MD614805 4 Sheet, Injector
MD131259 1 Center Bolt Crank
MD181032 2 Gasket Exh
MD092785 1 Cap
MR312761 1 Gasket Blow Off Valve
MD306413 1 Pipe, Cylinder Block
MD620908 1 Gasket Eng Oil Cooler
MS440002 1 Nut Eng Ret
MD149393 1 Gasket Eng Front Case
Cometic H1539043HP 1 Head Gasket
MB959379 1 Lid, Fuel Filler

Total from JNZ or other online vendors: $885.68

***Without Part numbers***
Description Qty
Composite Exhaust Gasket 2
MLS Intake Gasket 2
PS Rack Rebuild Kit OEM 1G 1
Composite Head Gasket OEM 1
Valve Cover Perimeter Gasket 4
OEM 6 bolt case, oil pump, filter housing gaskets 1
Water Pump Gasket 2
Turbine Housing Gasket OEM 5
Turbine Housing Gasket OEM 7CM 1
Upper Water Neck Gasket 8
Lower Water Neck Gasket 2
Turbo Oil Return Gasket 5
EGR Valve Gasket 6
Throttle Body Gaskets 13
Transmission Axle Seals (1 set, AWD) 1
Injector Sheets 9
Injector Insulators 9
Valve Cover Spark Plug Gaskets 12
2.5" Exhaust Gaskets 2
Oil Filter Housing Gasket 1
Transfer Case O-Ring 1
Fuel Pump Gasket 1G 1
Half Moon Gasket 1
Turbo Water Hose 1
Water pump Crossover Pipe O-Ring 5
Rear Main Seal 2
Front Main Seal 2
Misc Oil Seal 8
Blow Off Valve Gasket 2
Injector O-Ring 12
Valve Stem Seal 48
Misc crush washers and O rings

Total from JNZ (some prices estimates)
$723.25

Take them all home for $725.
Parts with part #s 50% of JNZ.
Parts without part numbers 40% of JNZ

Excel Spreadsheet detailing these parts is available, PM me with an email address and I will send it to you.

 

[citymunky]

Are you willing to separate some gaskets?

 

[lunchbox]

Shoot me an offer.

 

[GSX_TC]

how much would you sell the valve cover gasket set?

 

[lunchbox]

Perimeter gasket, spark plug well gaskets, or both?

 

[GSX_TC]

All the gaskets required when replacing a valve cover

 

[3O3EL0VR4]

Is there a difference between the stub shaft oil pump and the OEM? and just to be sure, the 7 bolt wouldn't work in a 1G correct?

 

[lunchbox]

This is the OEM stub shaft, I don't understand your question.

 

[3O3EL0VR4]

You answered without even trying lol. I was asking if the stub shaft pump is the OEM pump. And I am assuming the 7 bolt won't fit in a 1G correct?

 

[lunchbox]

All sold.

 

[GSX_TC]

wow that was fast, good job man.