The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
FS: 91 Galant VR4 UNK/2000 (everything sold)
- Thread starterSpam
- Start date
snailspool
Well-known member
Thanks for that Mike! I am interested in one of those longblocks to put in my personal GVR4 project here in ABQ. I may have someone interested in that transmission as well. I will get back with you tomorrow on both of these matters.
Last edited:
Spam
Well-known member
Yeah thanks for that Mike...I totally forgot about that site. One of the engines and trans might be spoken for. I'm discussing a pretty sizable group purchase with some guys. I do however have the second spare.
Spam
Well-known member
I found the Link...specs are on the left side of the receipt.
Spam
Well-known member
sh*t my bad...the receipt is upside down.
I also found this full set...never seen feet:
I also found this full set...never seen feet:
snailspool
Well-known member
Im down to do a group buy, the matrix can haul a LOT in the back, and has towed a GVR4 before /ubbthreads/images/graemlins/smirk.gif
Spam, is it the 350 longblock that is available? Any particular reason you recommend freshening it up?
Spam, is it the 350 longblock that is available? Any particular reason you recommend freshening it up?
blacksheep
Well-known member
I asked him about those mats already, KTM /ubbthreads/images/graemlins/grin.gif
Spam
Well-known member
Hey guys...sorry but I don't have my phone service on so I've been offline most of today.
The S90 throttle body and 1G tapped manifold are sold. To those two individuals I apologize, the closing time for UPS closed an hour earlier than it did before (I've been out of country for a year). I will send them tomorrow. Again...apologies.
Another thing about the car I found while looking for the ECU (can't find it BTW)...I have a big Mocal oil cooler that with braided lines to the filter housing will also come with the car.
The S90 throttle body and 1G tapped manifold are sold. To those two individuals I apologize, the closing time for UPS closed an hour earlier than it did before (I've been out of country for a year). I will send them tomorrow. Again...apologies.
Another thing about the car I found while looking for the ECU (can't find it BTW)...I have a big Mocal oil cooler that with braided lines to the filter housing will also come with the car.
Spam
Well-known member
Yes, everything for the most part is up for grabs. I recommended it gets freshened because it's ugly, a lot of surface rust on the block. But like I said...it did run well before I pulled it. I suppose I should put the disclaimer in about the other one too, mainly because I am going back overseas for another year and I would rather not deal with a unsatisfied purchaser from there. I don't know how other people that have sold used engines have dealt with problems but I hope I dont have to...I've used them both for over a year.
Quoting snailspool:
Im down to do a group buy, the matrix can haul a LOT in the back, and has towed a GVR4 before /ubbthreads/images/graemlins/smirk.gif
Spam, is it the 350 longblock that is available? Any particular reason you recommend freshening it up?
Quoting snailspool:
Im down to do a group buy, the matrix can haul a LOT in the back, and has towed a GVR4 before /ubbthreads/images/graemlins/smirk.gif
Spam, is it the 350 longblock that is available? Any particular reason you recommend freshening it up?
Spam
Well-known member
Two things...
-searching with the Iphone sucks, can someone tell me what I paid for the mats during the group buy? 2005-2006ish.
-the Link setup cost me $679 plus shipping total. It's brand new still...never been installed. $600 isn't a crazy asking price is it?
-searching with the Iphone sucks, can someone tell me what I paid for the mats during the group buy? 2005-2006ish.
-the Link setup cost me $679 plus shipping total. It's brand new still...never been installed. $600 isn't a crazy asking price is it?
^^
1. Floormats were $125 w/ number on rear mats, $115 w/o number. Shipping was in the $15 range IIRC.
2. BNIB Link price is good. May uncouple the SD stuff but most who want v3 get it eventually. Can't remember tho how vendor handles non-original purchasers for warranty issues, if they only recognize OP it could seriously impact price if too close to "new".
1. Floormats were $125 w/ number on rear mats, $115 w/o number. Shipping was in the $15 range IIRC.
2. BNIB Link price is good. May uncouple the SD stuff but most who want v3 get it eventually. Can't remember tho how vendor handles non-original purchasers for warranty issues, if they only recognize OP it could seriously impact price if too close to "new".
Spam
Well-known member
This makes me sad:
No antenna
No curb rash
I have a black dogleg to replace the missing piece...
Brand new SSQV
Buscher/SX AFPR and 750cc injectors
Downpipe with wastegate flange
No antenna
No curb rash
I have a black dogleg to replace the missing piece...
Brand new SSQV
Buscher/SX AFPR and 750cc injectors
Downpipe with wastegate flange
Spam
Well-known member
Never seen carbon...
Spam
Well-known member
Walbro
These curtis built JDM bumper brackets will come with the bumper:
These curtis built JDM bumper brackets will come with the bumper:
PM's and E-mails sent =)
TSimage
Well-known member
Link price is definitely good. If that included the ECU...
BTW how much you lookin to get for the e3 manifold?
BTW how much you lookin to get for the e3 manifold?
