asking $3000!
selling my project galant vr4. 1991, less than 5000 miles on the new motor. car in its current state is driveable, but needs a tune. comes with greddy emanage unit with eprom ecu, tmo stage 3 dsm chip.
Greddy E-Manage
JDM Transmission
JDM Cyclone Intake Manifold
Stock rebuilt engine with slightly higher compression
Multi layer steel headgasket
front mount intercooler
2.5†custom aluminum intercooler piping
4†Intake
low profile fan
2g MAF
Custom DSMchips chip with launch control, gauge selection and security and more
18†Koenig Rims with 245/35/18 tires
3†Exhaust with Borla Stainless Steel Muffler
Custom 2100lbs clutch with Clutchnet 6 puck disk
Rebuilt Clutch Pedal Assembly
New Clutch Slave Cylinder and Master Cylinder
Slotted and Drilled Brake rotors
4WS has been deleted
Replaced steering rack with newer unit
91 Headlight with 93 glass. Looks just like 93.
Walbro 255 pump
Fuel pressure regulator
autometer boost gauge
Brand new Radiator and Alternator
custom bilstein shocks (springs are rusted, and should be replaced).
current turbo on the car is a holset hx30, but is blown and needs to be replaced. all you need is a new turbo and a tune to get this car up running.
keep in mind that this is a project car, so it needs some work. body is decent, but has it has its fair share of dents/scratches. no rust on the exterior, but there is some on the inside lower portion of the doors, which is common on these cars.
with a new baby on the way, i don't have the time to work on her /ubbthreads/images/graemlins/frown.gif and i will be moving soon. needs a good home and wrencher.
if you have any questions, let me know. you can email me at [email protected] or pm me.
selling my project galant vr4. 1991, less than 5000 miles on the new motor. car in its current state is driveable, but needs a tune. comes with greddy emanage unit with eprom ecu, tmo stage 3 dsm chip.
Greddy E-Manage
JDM Transmission
JDM Cyclone Intake Manifold
Stock rebuilt engine with slightly higher compression
Multi layer steel headgasket
front mount intercooler
2.5†custom aluminum intercooler piping
4†Intake
low profile fan
2g MAF
Custom DSMchips chip with launch control, gauge selection and security and more
18†Koenig Rims with 245/35/18 tires
3†Exhaust with Borla Stainless Steel Muffler
Custom 2100lbs clutch with Clutchnet 6 puck disk
Rebuilt Clutch Pedal Assembly
New Clutch Slave Cylinder and Master Cylinder
Slotted and Drilled Brake rotors
4WS has been deleted
Replaced steering rack with newer unit
91 Headlight with 93 glass. Looks just like 93.
Walbro 255 pump
Fuel pressure regulator
autometer boost gauge
Brand new Radiator and Alternator
custom bilstein shocks (springs are rusted, and should be replaced).
current turbo on the car is a holset hx30, but is blown and needs to be replaced. all you need is a new turbo and a tune to get this car up running.
keep in mind that this is a project car, so it needs some work. body is decent, but has it has its fair share of dents/scratches. no rust on the exterior, but there is some on the inside lower portion of the doors, which is common on these cars.
with a new baby on the way, i don't have the time to work on her /ubbthreads/images/graemlins/frown.gif and i will be moving soon. needs a good home and wrencher.
if you have any questions, let me know. you can email me at [email protected] or pm me.
Last edited by a moderator:
