I'm replacing the supply with -6AN and the return with 3/8 standard rubber fuel line so obviously original supports will are too small. What hangers/clamps have people been using when replacing both lines? I've seen some double hangers for $10 - $20 a pop but that seems like a lot. I've seen 10...

My fuel line is leaking so I'm going to replace it with -6AN stainless line. I want to continue to use stock filters so I need to find out what the input and output threads are? I've seen posted 12mm x 1.25 and 14mm x 1.5 can anyone confirm this?

Never mind Google to the rescue,There are two basic types of flares used on OEM automotive brake systems throughout the world. The SAE/double (inverted/45degree) flare and the DIN/ISO bubble flare.Now I can order my parts, I'll be using Copper Nickel Brake Line Tubing Kit 3/16

Thanks for the quick response. So is the "standard inverted double flare type" the same as a 45* double flare? That is what my tool is capable of forming, KD Tools Double Flaring Tool. again thanks-Joe

I have to replace rusted brake lines and need to find out what is the pitch for the flare nuts, M10 x 1.0??Also, what type of flare is used, inverted, bubble, double flare??Thanks Joe

Both parts are the same color and are a perfect color match for the GVR4, I used a flash on the second picture and it lightened the picture up.Base is included $35 shipped for this one$25 shipped for this one

Brand New...100% Aluminum, hand welded, constructed with a bar and plate design. Good for up to 600bhp. all our intercooler has been tested to withstand more then 80 psi pressure and it has very small pressure drop across the end tanks, at 15psi inlet the out let has 14.8psi that means it has...

I got this from a member and have decided to go another route

I was considering fabbing/welding an exhaust if a deal for an existing system does not happen. Can I use 18g or must I use 16g stainless. It is not for a DD.

You have a PM

Pending sale, two interested individuals.---SOLD---

I have 2 Mitsubishi Tie Rods part number MB910859, they fit the Galant and many other cars The Mitsubishi units go for $58-60; JNZ gets $56.00 each. I will sell the two of them for $60.00 shipped CONUSApplication chart per Rock Auto DODGE COLT VISTA (1984 - 1991) DODGE STEALTH...

sold

Cyclone comes with butterfly actuator and vacuum canister, $110 shipped

Sale pending

I only had the fronts on the Galant and I liked the ride.I had a set of these on my wife's 98 Maxima SE and I thought it handled very good.

I've had these for a long time and will not be using them in the near future $110 plus shipping The fronts were used on 1592 for about 500 miles, KYB #235032 The rear are NIB removed for the photo, KYB #341121Note: Unfortunately my cost USPS and UPS shipping to California is $45.

Very likely that is the case. This also has continuously variable power,which I may be able to take advantage of in the future.

I know that Lincoln is a very good product, that is why I'm getting one. There were only a few people that had an issue and hundreds more loved it. It came down to the Hobart 140 or the Lincoln and the Lincoln is spoolgun ready.

Thank you all for responding, the advice and information; I have been doing a lot of reading and as a result many assumptions about welding and the equipment.I had thought that I would be able to TIG with the Tweco 141i however, I now know that an AC welder is needed such as the Eastwood...

I’m looking for opinions on a welder to do exhaust, intercooler, etc for the car and projects around the house. So far I’m thinking a 140 amp unit will do the job and is also normal household 120 volt. The ones being considered are: 1. Hobart 140C MIG $525 (not spool ready) click2...

A very pleasant transaction, great communication, fast shipping and part was as described. Quickly provided tracking number and a follow-up to ensure that I was satisfied, highly recommended as a seller.

I'll take the oil return line. PM me your PayPal info.

PM and email sent about ECMLINK. Will buy if it is full version

I need to find a source for a j-pipe that’s routed to the passenger side. I found out from Punishment Racing that most come down on the driver’s side of the motor mount. He mentioned a few places make one for use with a same side intercooler, short route piping, or one for a side mount...

Sold

The car does not have AC. It is not a daily driver for many people and and not a first Mitsubishi for most people either. I have not used it as a 'daily driver' but have taken it to work 70mi round trip with no issues.The car does have a 4-bolt rear ' B1H ' on the pumpkin and it has had the...

Thanks Andy and Alpha Male for your comments.

I added additional information to the post.

I have decided to sell the Galant it currently has 133,561 miles on it. It has not seen salt since I owned it. I wanted to redo a few of the SS fuel line fittings at the fuel cell prior to selling it and did not get around to it until this past week. I have another project 89 colt 1.5 to 4g63...

bump

I only need the parts mentioned as I already have 2 Cyclone intakes.

I am looking for:1 support brace for the Cyclone manifold, the top bolts are spaced differently than US, need to be 5.5" center-to-center NOT 4.6" like US1 Power Transistor mounting bracket

PM sent

PM'd

I will take it; I PM'd you at the 4G61T site. Thanks, Joe

to the top

sold

Sold

Terry, How is the exhaust tone with the 3inch ? I have very bad drone with mine, it had only a 4.8x7.8x12” Borla muffler when I got it and have added a round 5”x14” Magnaflow at the Cat location and it is still bad. I have since heard that a 20" Cherry bomb at the Cat location...

It will bolt right in and as mentioned in order to get the most out of its potential some modifications would be required. -Joe

TTT Both are still available

The j-pipe opens to 2.5" and has the Almost Chrome finish. It comes down just to the drivers side of the wastegate actuator of the 14b and 16g turbos. I bought it and never got to use it. I am using a T3/T4 turbo now and do not want to store it any longer. I posted a picture from the Dejon site...

I put it on a spare motor to show how it is routed.

Bump

Bump

Bump

sold

They are both the same color and it does match the interior. I was using a flash to take the pictures.

I have a Subaru small 16g compressor I bought that was taken off of a new car, I got it from an Ebay vendor, possibly Dentsport?? Asking $45 plus shipping.