I've decided to control meth injection through link using the EGR tab. I know I have the relay all hooked up correctly as when I ground the ground wire it kicks on, yet when I have it plugged into the EGR solenoid plug it won't engage. I either have the wrong plug, EGR is the one near the throttle body correct? or I actually have to directly wire the ground wire to pin 53 at the harness like ECMLINK wiki states. Can someone confirm this?
strokin4dr fighting them with a large needle 1280/2000 1135/2000
posted 05/15/17 11:22 PM
What color are the wires at the plug?
1908- sold and missed.
1280- 2.3, FP 35R, E85, etc.
1135- 100% stock - 88k miles
'93 Mirage hatch- 4g63, AWD, etc (hoarding for build)
Posts: 2651 | From: Savannah, GA | Member Since: 08/30/05 | IP: (22.214.171.124) |
Just updating this, after some digging looks like only CA cars had this plug in the bay. I confirmed this by checking the pin out on my ECU and I have an empty slot, so I added a pin out and going to wire it up to that. I'll update when done to confirm it works.