The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

body clips?

Brunoboy

Well-known member
Joined
Apr 25, 2008
Messages
2,880
Location
San Bruno,CA Home of SFO
has anyone replaced the body clips that hold the door panels on the exterior? what size are the clips and where can you buy new ones?
-Shane
 

misterfixit

Well-known member
Joined
Aug 4, 2004
Messages
1,596
Location
Midlands, UK
Black along the bottom, white along the top. Try Mitsubishi. Look in my build thread about halfway through and you'll see their shape as they were arranged in piles in one pic. They go in 7mm slotted holes, and the head is rectangular. Different sizes for each colout.

Rich
 

Terry Posten

Well-known member
Joined
Dec 16, 2003
Messages
9,009
Location
Davenport, Iowa USA
Call JNZtuning.net and they can get you them. There are quite a few on each door panel and you will also need some 3M double sided panel tape for the top and side edges. DO NOT USE TAPE ON THE BOTTOM - it will trap water and cause rust.

They should be about $1.50 each.
 
Last edited:
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top