1941Galant
Well-known member
I haven't done anything with this car in years, and have moved on to motorcycles, so it's time to sell this thing. My plan is to do a complete mechanical part out, then sell the rolling chassis with most of the VR4 specific parts. Better pictures will come in time as I get to work on the car more. If you have any requests, please feel free to ask. As far as larger items, I have a pickup truck, and can deliver within a reasonable distance.
Chassis, 101k miles, clean title, very little rust $2000
Aeromotive AFPR 3 port $125
Garret 24x12x3.5 IC $300
fuel pump hanger (set up for Bosch 044) $150
dual feed fuel system $400
8 AN line
aeromotive filter
dual feed rail
Whiteline 26mm rear sway bar $200
whiteline 24mm front sway far $150
white linesway bar end links front and rear $150
4 bolt rear diff $300
3" turboback exhaust $400
Cold side IC pipe (2.5", tial flage) $150
TIAL knock off $20
Dynatec ARC2 $200
COP (made by curtis) $150
Valve cover with 10 AN fittings and hoses $150
Cylinder head SS oversized valves $600
dual valve springs
ARP studs
Bottom end $1,400
forged internals (wiseco/eagle)
Forged 2.4 crank
Fluipdampr pulley
MLS gasket
FP3X cams $300
Jay racing alternator reloction bracket $80
DSG shift knob $50
Rebuild alternator from NAPA $70
Rebuilt transmissions w/ upgraded synchros $1,000
4 spider center diff
Rebuilt by JNZ
PTT twin disk w/ extra disk $800
SS braided line
clutch line accumulator
Curtis projection headlights $100
single din and 3 gauge radio surround $50
AEM wideband $100
Rebuilt fuel tank - tinned, painted $400
Radiator from John Teeter's rally car + overflow + swirl pot $300
SS battery tray $50
Eprom ECU $150
Ostrich emulator + cables $100
Driven innovations SMIM $600
Tubular exhaust manifold, no name $100
Chassis, 101k miles, clean title, very little rust $2000
Aeromotive AFPR 3 port $125
Garret 24x12x3.5 IC $300
fuel pump hanger (set up for Bosch 044) $150
dual feed fuel system $400
8 AN line
aeromotive filter
dual feed rail
Whiteline 26mm rear sway bar $200
whiteline 24mm front sway far $150
white linesway bar end links front and rear $150
4 bolt rear diff $300
3" turboback exhaust $400
Cold side IC pipe (2.5", tial flage) $150
TIAL knock off $20
Dynatec ARC2 $200
COP (made by curtis) $150
Valve cover with 10 AN fittings and hoses $150
Cylinder head SS oversized valves $600
dual valve springs
ARP studs
Bottom end $1,400
forged internals (wiseco/eagle)
Forged 2.4 crank
Fluipdampr pulley
MLS gasket
FP3X cams $300
Jay racing alternator reloction bracket $80
DSG shift knob $50
Rebuild alternator from NAPA $70
Rebuilt transmissions w/ upgraded synchros $1,000
4 spider center diff
Rebuilt by JNZ
PTT twin disk w/ extra disk $800
SS braided line
clutch line accumulator
Curtis projection headlights $100
single din and 3 gauge radio surround $50
AEM wideband $100
Rebuilt fuel tank - tinned, painted $400
Radiator from John Teeter's rally car + overflow + swirl pot $300
SS battery tray $50
Eprom ECU $150
Ostrich emulator + cables $100
Driven innovations SMIM $600
Tubular exhaust manifold, no name $100
Last edited: