Ok so unfortunatly I have a lot more electrical issues going on that I thought. I tried to swap the ETACS box to hopefully fix my door lock, dome light, and seatbelt issue, but after swapping it with a different unit, nothing changed. Its obviously not my problem but just out of curiosity, the ETACS units werent the same...
this is the 91 unit...
This is the 92 unit...
Does this make any differnce, the 92 one was know to be working properly.
Issue 2
The passanger seatbelt works fine, the driver side does not work at all. I swapped the unit out with a known working one and it still doesnt move at all when you open/close the door. I also checked the where it plugs im at the motor with a voltmeter and it was reading 12v.
Issue 3
Dome lights do not work at all, I checked these also at the plugs with a voltmeter and they were reading at around 5v. I didnt replace the bulbs but they all look to be fine. I cant imagine all the bulbs being bad.
Issue 4
The 10amp Tail light fuse that is under the hood blows after about 1 min of turning the lights on.
Issue 5
Door locks do not work at all, I was hoping this was due to a bad ETACS but after swapping them I dont know what to look for.
And last thing I can think of is I cant figure out where this plug goes after swapping dashes. Maybe it has something to do with everything.
Here's a pic looking up from underneath the driver dash...
And from the top with the dash removed...
It has 4 green wires, 2 with white stripes and 2 with grey dots.
Thanks so much for any help.