Pm'd

Looking for a clean Hood to replace mine that got destroyed. Prefer for it to be rust and ding/dent free.Thanks

Power goal is north of 700 to the wheels. I'll be drag racing the car along with road racing, street duty as well from time to time.I decided to go with an ETS 4" core. Trimming of the JDM front is necessary in two areas especially if it's an RS bumper.I definitely understand you're...

Lol 10.5" height noted!Thanks for the reply. The 4.5" on James car fits behind his JDM front. Maybe they trimmed the insides of the slats until it would fit.I'm currently torn between purchasing a 4" or 5". Is the 5" necessary, maybe not but if it helps with intake temps and I'm not heat...

Does anyone know how thick of an intercooler core we can install on our cars? Also will a JDM bumper make a significant difference in that measurement versus a stock bumper?I know James Foster has a custom 4.5" on his car, has anyone done a 5 inch thick core?

Got into an accident with 1471 and need to bring it back to life. If anyone has these parts and or a shell please contact me as I also need a core support.Thank you, Terence

Looking for a three speed harness bar. Wondering if any of you guys are ready to part ways with yours.Thanks, Terence

payment sent for a 93 fob. Pm also sent.

Are any 91' fobs still available for purchase?

Looking to delete the abs while the engine is out. Prices shipped to 44120Thanks, Terence*no longer searching, one found and purchased

Yes the o2 housing is an evo3 model.Terence

Selling some things I won't be needing anymore since I've upgraded. Prices do not include shipping or fees.1.FP recirculated intake with filter. $150 2.BEP HX40 .55 turbine housing. 4k miles. $225 3. Punishment racing externally wastegated recirculated o2 housing with tial gate. 7K miles. Held...

Thanks Nate, link has been forwarded.

Posting for a buddy that is in need of the front engine mount bracket.Thanks, Terence

Looking to buy a factory holset exhaust housingThanks, Terence

Clutch sold to me

Thanks Struc,I've been searching my local yards and a few online. Seems like they don't get around to updating the websites often.

Any pictures of the cylinder head?

Selling a set of blue max injectors that have 14k miles on them. Injectors have been cleaned and flow tested (1300cc's). Injectors come with all new seals and are ready to plug and play. Looking to get $280 shipped.Terence

I'm looking to start a new project since my engine is out of commission. Looking for a good condition G4cs engine block.Thanks, Terence

definitely interested.

Ohio has this stupid law, I keep mine between the center console and the passenger seat. If i were to ever get pulled over it I'd simply tell the officer I'm not drilling holes in rare car's bumper. My Ram 2500 doesn't have a front plate on it either, no one ever messes with me in that truck...

Like the title says I'm looking to buy a bottom mount twin scroll T4 exhaust manifold. I'd prefer it to have two tial mvs flanges on it but let me know what you have.Thanks, Ternece

I guess I'm bring this back from the dead but I'm curious. JSchleim18 why did you run the stock thick white wire from the harness to the red wire(S) terminal? Every write-up states to leave that wire (the thick white wire) alone or cut short and tapped up.It was also stated to run the red(S)...

Hey Captn, you never responded to my PM.

No I haven't had a solid hit yet. How are the connectors? Any corrosion? How much are you looking to get for it shipped? please PM me.Thanks, Terence

I may be interested in the Galant GSX engine harness. what are the differences? Could you pm me those?Thanks, Terence

Is the ECU harness in good condition?

Looking for an ECU harness with all the connectors, no broken wires, no corrosion or anything else that would cause me a headache hunting down.Thanks guys let me know what you have. I'm located in ohio zip is 44120. help me get 1471 back on the road pleaseThanks, Terence

This is my current set-up minus the two i have on the a-pillar (boost and wideband), excuse the ancient radio I've replaced it with proper kenwood.

Just giving this a once over and looking through here to see what you guys are talking about. Talked with Mike(gsx tc) the other day so I figured I'd come see what he was mentioning. I live in Ohio roughly 45 minutes from the track so I'll definitely be making it out there, add me to the list...

Thanks for the input Cheekychimp, I believe I fully understand this swap now.

Mark,I used the wrong terminology. I like the little things that you dont see on new cars now a days, 4ws, 4 lug. Although as of recently Acura has designed and is starting to use its own 4ws system.Wanting to bring the rear out is really an aesthetics things, spacers just dont sit right...

Liv4psi, I saw that Cheekychimp has done it and I dont know why just PM'ing him didnt cross my mind but he also used the entire rear trailing arm and rear brake set-up. If possible I would like to only use the trailing arms for now.

Ok guys I'm planning on upgrading to coilovers over the winter and since I'm in there messing with stuff already I just want to do everything at once and be done. So this means I plan on accompanying the coilovers with 1G fwd knuckles to help with the front suspension geometry, adjustable upper...

I bought a shift knob in the group buy that Abe organized and I must say it was great doing business with him.

Hey guys be careful with your knobs! I installed mine to test fit it and when I went to take it off this happened.I grabbed the knob to take it off and It felt like the entire knob was turning but, only the top half was spinning which I believed pushed the wires out of the knob. I'm hoping...

Mine arrived today and I cant help but to be more than pleased. It looks amazing. Here it is pictured with my new Nrg limited edition glow in the dark steering wheel, pretty excited to get both of these in the car.Thanks Racah15 for putting this together.

Has anyone from the second shipment of knobs received theirs yet? I'm not exactly close to Racah15 but I feel like it should be here (Cleveland) by now if it was sent on tues.Who's super anxious, this guy! lol

Has the next batch of knobs been mailed yet?P.S. Not trying to be a bother, just really anxious and wishing I would have known that you didn't have my address so it could been sent out with the first batch.

Currently I have sprung 6 puck Spec stage 3 and a Fidanza replaceable friction flywheel. When I first bought it I just knew I would love it but after finishing my build and trying to go out for a test drive, I quickly found out why so many people hate the engagement of puck clutches. Originally...

Address has been PM'd

Has anyone gone through with this? Having another option other than BC racing and DGR would be nice. Ive only heard good things about the BC's for our cars but nothing about DGR.Terence

^ Agreed, a pm to those guys that haven't paid for shipping would help speed this up. I just happen to stumble across this because the forum is my homepage and it was the first for sale post.-Terence

payment sent

Whats the final word on these, are they being shipped out to the owners or back to the manufacture?Terence

Sweet is there a possibility that we'll have a shipment in the next month?Terence

Hey, did you ever email them?Terence

Any good news?-Terence

What color is it? And what condition is it in?