Need a 92 dash badge. Someone let go of just one out of your collections. PleaseDiego

As the title states, GVR4 AC compressor. Took my AC out, don't need it in the garage.$50 obo+ ship/pp feesDiego

So my life has flopped, old lady cheated on me and booted me from the house almost a month ago. So instead of sleeping on Steve's couch and the car, I have decided to sell as is or part out 1309.Those here that know me know the build, time and money spent over the 8 years I have owned it...

This cold snap has had people asking me to do another run for us cold frozen people. I've done about 5 GBs and had no problems so I'm doing again!Link is here. clickAnd the list starts below!1. Shane Hewitt TransparentDSM (His order I will paste here in an update)And GO!!!

On the MTXL it has two wires that can be used for logging the AFR signal. Those wires are brown and orange. My question is, do I need to run those wires ( I assume Link will have an option?) or can I just leave them be and keep the gauge running as is in my pod and not mess with anything else...

I have V3L and want to log my MTX-L... Reading the directions provided what would be the best place to put the wire(s) provided with the gauge.Also best place to source a 12v switched power source. When I picked up the Galant years back everything was ran through the LF speaker and there is...

Used set of FP2 bump sticks.Would like to fetch $275 local or $300 shippedfor them, I had them cleaned at my shop to have the surface rust removed from them sitting about for some time.I would be up for trades as well. I really need a WB, and maybe other trades as well, I'm open to various...

Found a company that makes a cage for the Galant. I had to email them and this is what they said."Diego,Well Safety Devices does make a full 6 point bolt in cage for the Galant VR4. They are available to order and are built when ordered so we do not have it in stock.The roll cage would...

As the title states I am looking for these items.Thanks

I have a Honda Mishimoto 3" half core and I was wondering what the people here that have them are using for a thermo sensor on the bottom. The stoc thermo sensor doesn't fit, and I went to the yar today to see if I could source one but all the Hondas I found don't have one on the radiator.So...

I have a factory PAINTED in box Hasegawa Galant VR4 model that I have taken the plastic off opened the box moved a few things and put back in the box. I paid somewhat like $80 for it and would like to get $50 shipped for open box.I do have some paints. Not sure if they're good anymore but I...

Needs 2 bolt EWG and a set of injectors as well as a WB gauge wig wiring I have a sensor already.Diego

I haven't posted much of any of the updates I've done this year. That an I haven't take many pictures to document my build. Today me and Steve (92gvr4num65) did some pipe routing and radiator mount fabbing.But in the last few months I've added the Evolution RS front and rear bumpers, deleted...

I am listing a few parts I need to sell. 1. Nt TB came out of a 93 talon DOHC no sensors pretty clean-$45 shipped obo2. I have a old school HKS SuperMega intake canister with new 200mm green filter- $75 shipped obo3. Polished exhaust manifold heat shield- $25 shipped4. USDM...

I picked up a short route cold pipe and its been less then awesome trying to fit this pipe. I went from my turbo TB to a non turbo TB and back again. Added a 2G elbow and I still can't get passed the radiator. I will not cut the frame rails to make this work nor do I want to smash a coupler to...

Need one in a fly to get to the races in a few short weeks...19-21...Someone help!Thank youDiego

I have 2 91-94 Dsm shifters (about 1-2" shorter then stock VR4) for sale.$25 a piece shippedWill post pics in a secondDiego

Pulled the Emissions last night with a local VR4 guy, and he was talking about needing a check valve in the trunk or some business like that...Can someone clue me in?Thanks guysDiego

That is right, random Galant stuff.-ABS delete full setup -JDM fogs or covers -Manual rack -CurtisCo Subframe connectors -93 crystal lightsAnd well Im not sure what else I will be looking for.... LMK 970-573-6006 for fast response

Trying to sell a F38 2 bolt wastegate, has the big blue spring (1 bar) has a nick in the top cover, doesn't effect the item.Looking for $95 shipped with a dump tubeSold

My transmission crapped out and I am done with this shell, so looking to part out some pieces to come up with some cash to buy another shell from a friend.1309/2000 Nile Black 13x,xxx milesDS Fender, New, no rust- $100+shipping 91 Tail lights, no cracks- $75 shipped Front Gr2 shocks...

Everything is hooked up. Went under the knife for some upgrades, only thing I changed was injectors 560s to 720s and added a chipset for said injectors.Car ran fine before upgrades, now it just cranks.Locals are more then welcome to lend me a hand to figure it out.Diego

Is there a place that sells aftermarket water lines?I was playing around with my FP and noticed that I had to really yank on the front water line just to make it line up... Does anyone out there make a aftermarket water line? Someone tole me just to cut it and put a hose in between, but that...

Posting this for my brother so it doesn't turn into a crap shoot...He's looking for a 18 or 20G and injectors and possibly a chipset to back said injectors. So 750s or so will suffice, do you have chip/injector combo.. Let's make a deal...Who has a clean, can be naked (no chip), Eprom they...

About to finish up the few last things, and I need these bolts..What is the size for the bolts (4 total) on the turbo drain line. From the turbo side to the Oil pan side.. .I need these, if one of you part junkies have these, let me know and I will shoot you some Paypal for them pronto.Diego

The interest is strong for another run. I have compiled the prices and am ready to make a list. This will be for the 4th run of these products that I offer, so get 'em while the irons hot.The run down goes like this....SHIRTS: $22.50 SHIPPED SINGLE -ADDITIONAL SHIRTS THEREAFTER $20.00...

As the title states... need these, in a flash. Best price?

Looking for a Keydiver chip for 750cc, 2G MAS, I have a chip for my 560cc but that won't do, now will it.Other things of interest, Abs delete kit, Evo3 exhaust mani or some sort of tubular mani will work as well. Either a nice MBC or a decent priced EBC, Safc II or Neo.That is all.

Went out to wrench a bit and button things up under the hood. Well 7AM is just too early for this kid to wrench, so I put my oil drain tube on my neighbors' truck's bumper and wasn't paying any mind to her coming out and leaving.... with my drain tube on the bumper . So I need one please from...

I need to run an -4AN line because my hard line from head to turbo wont fit around the housing. What are some ideas of going about this. Any links somebody could attach for me to check out. Ive seen STM and FPs sources but don't know which way to go. I would like to drive the Galant again soon...

I have a WTB and I have gotten random emails from non board members from across the pond.

I am looking to get rid of a few parts to upgrade to better stuff.First is the Stock GVR4 O2, has held up fine, no cracks, DOES NOT come with sensor looking for $55 shippedStock 1G valve cover. No cracks or busted baffling. $45.00 shipped pics upon request, it is stock gray in color...

Thought I seen one for Justin before please move if so.Justin, I want to thank you for the purchase I made today, great guy with lots of wisdom.Thanks a lot man.Diego

I am in need of 720cc or bigger injectors have 560s but went to a 20G and need more juice flowAlso looking for Evo rear seats, possibly the fronts but would really like a set of rear seats.Paypal ready.

So I sold my E316G to a member here and I sent it out and got it back in the mail, so I was able to get a side by side shot...FP20G vs E316GIt is externally gated and I have an Ebay 38mm V-band Wastegate for it but dont plan on running it for safety factor that I WANT to know the spring...

This guy, what can I say but will not hesitate to do business with again. Great communication, Awesome payment timing. Thanks Dan for letting me go to a FP20G. You are a stand up guy.

A wire broke on my temperature sender off the coolant neck, does anyone have a spare? The local yards don't have any for me to grab and I would like for my needle to stop bouncing in the cab.Thanks

I know the FP 68hta is just a 16g shell with a 68hta cartridge inside. I emailed FP to see if they could upgrade my E3 but they no longer do that.Anyone else do this?

I had a question, about a trans bolt... I acquired my missing tranny bolt from 89mirageman and well seems like the part that threads to the block is stripped. It's the bolt right near the slave. Can I purchase a bolt from HomeDepot with a washer and nut to secure the tranny... or do I have any...

Anyone have spare bolts I seem to have lost just one bolt

My master cylinder won't feed any fluid through the line to the slave. If I push on the fork and press the slave in it will get stiffer but the peddle is dead... any solutions?

So a few members have pm'd about the JSB shirts, and with the Ice Cream cruise, Shoot-out and Factory MOD right around the corner, I thought I would see if anyone else is interested in purchasing one.The shirts would be screen printed and and I can get a variety of colors to choose from...

I have some Intrepid coils and I need a plate... anyone make them or sell them?LMKthanks.

559/2000 NB in my town. CRAZY... on my way to meet up with Bryan and get his details... will get his info for Iceman, and will ask him to join our group.....

I rebuilt my clutch master and I dropped the to nuts that hold it on while re-installing the master, again..Does anyone know the size so I can buy new ones.TIA.Diego

1991 Mitsubishi Galant Vr4 1309/2000; Nile Black; Sunroof; Spoiler1991 had 2000 Gvr4's shipped to US, 92's had 1000NOT MANY LEFT ON THE ROAD TODAYFull paperwork for car, every receipt I have from when I bought it and the previous (2) owners.2.0T 4G63T ( 6 BOLT ) rebuilt 600...

Paid fast and timely. Great Guy, Great communication... Thanks for the buy.Diego

Paid quickly, great guy.... wouldnt mind selling more of my parts off to him.Thanks for being Great Joe.Diego

Bought a repair kit for my clutch master cylinder from RockAuto..... anyways what am I looking at getting into. Any advice on what to look for or anything I need to adjust after replacing?Any tips are helpful

I was replacing the radiator on 1309 and as I was putting the Therm housing back on the 2 spade connector broke. Now Ive searched and found other discussions, but they were never really answered as if this was really needed to be connected. I dont have A/C is in the car just no belt and all that...