K

Of this isn't ok to post this here let me know.I'm going to be grabbing stuff from the UK and would love to help folks out.Also helps on freight to fill orders.Currently have bumpers lights and bits.I'm working to obtain pictures. Feel free to DM me your needs and or wants.I will do my...

I appreciate your responses, I figured it our I was off on timing on the bottom end. Now I'm pulling fuel with ecm link at idle. Man evoscan is so much cleaner lol.Regardless she idles, she revs she will drive. Kelfords are amazing she lumps real good at idle. Jdm bumpers on arrival. So to...

Update pulled timing back down, and reset just cycled fuel pump with ecm link and had 15psi. Getting gas now hahaha.We shall see. PS if anyone wants TRU HKS cam gears apparently I ordered 2 sets from STM hahah

I'm still weirded out that when I do get it to start I'm pulling 0 vac and it's rich as f***

Was a cold comp test yes but after cranking her several times compression is coming up, im now up to 105 psi.We just set timing at 5BTDC using a light and magic. Lol no marks on my pulley which is weird.Just pressurized cylinder 1 and the motor holds pressure at 50psi. No leaks

The most sh*t part is my jdm bumpers will be here Friday 😭😭😭😭

Wish I still knew dsm fellers here in the PNW. At this point I'd pay to have this old timer fixed, English racing is retarted expensive now and backed up for weeks

My TDC is mint tho and she looks pretty sitting here. 🤣

Yah I pulled her apart due to wet exhaust port #3 did head gasket cams ect. First start was no bueno. Couldn't make her idle and she is pig rich. So I jumped timing connection to try to set base but can't keep her idling enough to get out of driver seat with a timjng light.On a whim I did a...

Wish I could get mine running, can't even get her to idle

I like Shiney, now im waiting for cams from STM and billet motormounts. Just got my titanium charge piping material in today. So im stoked to go home and start welding. 😌

Was alive until couple weeks ago, but 1150 is going back together as we speak

No response, but...... I have a line in 3 of them, u have a family member un the UK.Your welcome to DM me maybe we can make magic happen.

Head was decently clean in and out.Waiting for extream psi order to show up, got a OG OEM timing belt cover!!!And from STM torque solutions mounts, kelford 272 cams. Pretty stoked to be able to work in my garage again, and especially on this old girl.

Welp maybe you know or maybe you don'tI have been on a revival mission for this old girl. Started to see alot of blue smoke at idle, thought maybe it's the HX35, pulled manifold and found #3 wet with oil in the exhaust. So off came the head. As of now 11/9/23 head is at machine shop getting...

Here

Ok so I feel stupid here as I'm tearing my turd apart, but im looking at the gown awful motormount on drivers side (cam side), I know they make poly mounts to replace the huge hunk, bit what is the options for powersteering then? Am I missing something obvious or do I need to buy say 2g stuff...

I have a few full swaps here locally, some guy has motor and trans along with all running gear, seems he was going to convert a regular galant to awd with jdm goodies. He wants 3k for car and all but only 1k for the motor with engine harness.I think you could get way better deal on motor and...

Thanks bud, wish I could get more titanium support for the VR4 lol

Solid question, or is it a heat dissipation situation?

Well I guess it's time to crack this open for everyone to hear about me.Hi my names Brian. I'm from Washington state and have been building bagged trucks and go fast cars since I was 15. I'm now 38 and really have not slown down to much, (looks at wife, hi hunnie). HahaI'm an RV Technician...

Welcome back.

Sent a PM to you.

Not new just kinda always remained silent. Had this vr4 since 2019. (1850)Bringing it back to life, and loving the way this forum functions, wish there was more of us but whoever is here so far is tremendously helpful.

I won mine in auction bud I'm sorry.

Love the white one, has similar taste as me with all the purple hahah

Absolutely, the EVO loves fall and winter lol so I bet the VR will be the same.

I will buy Friday. Pay pal me invoice [email protected]

I have scrolled by this a few times, and I keep looking over at the wife, asking my self... "would she be mad" lmao. I am pondering, and if not, BUMP for a solid foundation of a head.

I'm so close to driving her again, I think the Fall weather shall be glorious for me too.

Yah it already had a rather large fmic on her to begin with, but it was all jacked up with ugly mix matched piping ect ect. Never even seen 200F on a hot 80+ day. But bow I feel better about turning up the boost a bit, to see what she was like in the glory days on E85. Lol I personally don't...

Not going to have that issue my self, but I can understand how volume works within a bigger tank/core. Ran into a similar issue on my 9MR until I went to a FP BLACK, PROBLEM SOLVED lol.

This is the Build Thread for FLOOR HOLDER. Reply below.

This is the Build Thread for 1150/2000. Reply below.

Highly unlikely you still have it, bit if you do let me know. Cash ready

If you ever decide to part ways with the brackets lol, let me know.

Do the 1g ETS fmic its super easy to install

Got it moving along bumper supports all fabricated to hold the gawd awful usdm bumper :( and bumper is back on. Just need to try to fabricate fog light brackets now since I can't find a single one hahah.

Again thanks for this

Love this, it's literally helping me and my daughter do the 1g fmic from ETS now. I'm cutting the flat bar to run accross now, just trying to see how you got it where you got it, there is a tiny lip on the face, can't make it sit flat.

Damn, I just read all 6 pages of this, and with each picture and post by him I was getting more and more excited to finally be able to obtain a nice fitting fmic for my VR4, sad panda.

Oops nevermind lol

I'm interested

I'm super interested, I literally have 23hrs left on one I've been bidding on. I will be in touch soon.

Quick question if you were to sell it how much? And are you in Washington state?

Just my opinion, KEEP IT and make it what it should be.