Have a complete Thule rack with mounting hardware, key lock, and plastic "inserts" for the roof guides.Asking $250 and I take paypal.Id rather have you pick them up as shipping seems sort of a pain in the a$$ for these.Im in Hillsboro Oregon.Please contact me at : 503-863-6596 via text.

Looking for a clean EVO III 16g setup, including o2 housing, and manifold if you have it.

Ive spent some time understanding why my valve cover leaks on a car, only to discover that the previous owner may have gone at the top of the head with the edge of a screw driver or some other device. doh!In any case, it has a few nicks in it, and wondering what you all did (rtv in those...

Have a DSM that I want to dump the ABS unit and convert to non ABS. Need the proportioning valve and the lines, if someone has em. I dont want to go the expensive STM route and fine with hard lines.

I picked up a vr4, with some level of tapping that goes away at some level coming from what looks close to cylinder 1 (i havent pulled the valve cover off yet). I also am exhibiting some weird behavior where the car hesitates badly at 4k.Also the car doesnt overheat, but exhibits some white...

Looking for a front uncut bumper cover in or near the Portland Oregon area. Happy to drive even out to Vancouver Washington area, if someone has one for pickup.

Hello all,I've been in search for a passenger side front fender. I've gotten a few hits, but once i ask about shipping to 97123 (Hillsboro Oregon, near portland) -- and i got 'crickets'(no responses back).If someone can ship or has access to one, I'd love to pick it up. Anyone?Akash

Need the bumper filler that sits under the lights and wraps around. (sits above the bumper and between lights) Need the passenger side front fender Need the corner light on the passenger side

Could use the following* Front fender passanger side * the corner light * the metallic trim that wraps around the top of the bumper and under the lights (it wraps across the entire bumper)

Not a single one wasnt on jack stands for weeks...clickOff topic maybe..but completely true and gut wrentchingly sad. Order the parts...Fsck!

Its a stretch...and one hell of a one at that....Want to replace my cloth ones for decent gray or black 1G talon leather seats. (Fronts and back)Need em sent to or near Vancouver Washington/Portland area.

I have a braided line setup on my 1G, and it sprung a leak, hoping someone can help me track down what size it should be.I was able to disconnect the blue fitting that attaches to the sending unit - from the threaded red fitting that is actually on the braided line -- as that is the part that...

Have a 1G, that it pretty much doesn't matter how much you tighten the banjo bolt down with new crush washers -- still ends up leaking.I've been looking into some of the oil feed lines on line, and noticed a lot dont come with the block off bolt and recommend routing near oil filter.Any...

Ive been through the VFAQ a couple of times, including some pretty nice videos online about setting base timing. I have some questions based on things I see.The idle is erratic, and i've already validated that the biss screw, vaccum lines, the ISC, and FIAV are properly functional.I've set...

Relocating my battery to rear ...What'd you do to get the small relay box on the positive side, plus the additional positive wires all attached together?Did you guys use a 100amp circuit breaker in this location as terminal post or?

I pulled the throttle body of my other 4g63t today,and needed to know a couple of things.1) If i use a FIAV bypass plate...do I STILL need to run the water lines through the TB?2) EGR -- If i block it, the total number of vacuum lines going to it is effectively 0 which fine...does...

Per $Subject,need a set of the visors, a rear view mirror with no pits in it, and plastic clips that hold the visors in place.

Need a set of front stock seats located in Southern California or Phoenix for pickupNo rips and in good condition.

Will the HR springs meant for a GVR4 work (correct spring rates) for a 1G talon?

I've been told that many people have replaced the hard fuel lines with braided ones that run along the side of the car.Also that there is a pre-fab kit available for the VR4. I did a search and couldnt come up with it.Anyone know where to get this kit?

All the links never resolve, and time out to blank pages.A ping test to the FQDN - galantvr4.org shows good response, so it doesnt appear the site is inaccesible.However something internal to the site is very broken. Could be queries to the database.As before some one needs to check...

What if any differences from the perspective of the transmission, sensors on the engine, or ecu are there between a 1G awd DSM/Talon and the vr4? Basically, if one were to swap the engine from a vr4 into a talon, what would be things to look out for ? (assuming the use of the 1g talon ECU in...

Picked up a second vr4 with a potential locked up engine. -- The previous owner, says that his daughter drove the car around, it overheated, and subsequently hasnt started since.I can hear the starter engage, but the engine does NOT crank. Tried to manually turn the crank from both the crank...

ADMIN PLEASE LOCK THREADPhone (909)664-5103Good:*Rebuilt 4g63t with 75K , Ross pistons .020, eagle rodsSilky Smooth Engine. Runs pretty spectacular and a few have remarked at how great it sounds.* JDM RS intercooler * Walbro 190lph fuel pump *16G turbo, EVO 3...

Need some advice on what all has to come off, and perhaps order of events to drop the front subframe.Looking to replace some brakelines that come from the rear to the front and its the only way....

With our aging cars, one of the dreaded (perhaps feared) parts on the car are brakelines that snake between the front subframe, and along the side to the rear of the car.If they go bad/rusted , you're damned in having to replace them and trying to find a replacement(if anyone will even bother...

I had to replace the rear brake lines due to some rust -- The hard brake lines that is.Need some tips on running the new lines into the engine bay near the firewall. Do I have to drop the front subframe to snake it in?

See $Subject?Whats the definitive guide or good set up guides for a 4g63t build?Currently have the Bowen, Garcia guide that I bought on Amazon, but need something that is more of a walk through.

Looking for a good site or source for replacing the tank. Any ideas?

Looking to build my own hard brake lines and need to know the diameter, so I can buy my own lines and bend em and flare etc.

Was told by a guy at the radio shop that our stock amps put out a very specific impedence on the speakers that are not stock, hence replacement of the speakers radio, and amp is necessary.Is this true or bullshit ?Also any recommendations-- I think I'd like to convert to single din, and...

I actually had quite a good experience. He went as far as to ship to my address in Phoenix, followed up repeatedly...and when we found out that PM was broken on this site, he emailed me almost everyday to make sure things were in order.In addition he also sent me the rear badges for free...

Really nice guy, and I love my new toy!

SOLD SOLD SOLD SOLD SOLD SOLDOkay its not a Vr4...not even close..but I thought Id try here as well.I want to sell the car for $1900. That includes the Greddy turbo kit + I also have a megan manifold and downpipe + all of the stud bolts etc.The car itself has faded paint, however...