This thread has been approved by Hertz as I am not the owner of the car. I will be handling the entire sale process minus signing the actual title. This thread is also about the car not the former owner so leave those questions at the door. I can be reached via PMs here or email...

I am in the last few stages of finishing #3 and needs a few pieces to finish off the interior.-Driver side under dash panel with the air vent and the ducting for the vent. -Dash dimmer switch. -Plastic A pillar cover for inside the car.All these parts need to be in very good condition and...

I have spent a few months trying to get #3 up and running again. I have been doing what I can in my spare time (I don't have much of it) and was finally able to take her for a good long drive today. I also washed her and did a good general outside cleaning. The paint on the car is in fantastic...

These parts are used but are priced accordingly to try and move them quickly.-92 headlights used need cosmetic refurbishing but will get the job done as is $75 shipped to lower 48 states-Old School TMO stage 3 chip. I honestly have no idea what options are setup on this chip. Looking...

Is this a replaceable part? I know it can be pressed off but I wasn't able to find just that bearing. Even when I look for the axle on various parts store websites they all show just the outer portion after the carrier bearing.

Posting this up for a buddy of mine. We're looking to fully refurbish some 93 head lights and was wondering if anyone has experience with this stuff?Any of you autobody guys ever worked with this stuff? clickHow does it hold up to heat? Will it withstand headlight bulb heat? Id like to have...

Must be in great condition have cash in hand.Thanks, Michael

I have a few things taking up space and could use the money for wheels on my GVR4. All of these prices are OBO and do NOT include shipping or Paypal fees. I have these up for sale locally and will do my best to keep this thread updated.FP intake with recirc fitting and couplers for a...

I absolutely loathe the wheels that I have now and want to upgrade to stock EVO wheels. I know that with a budget of only 400.00 shipped I might have a hard time but I figured I would see what is available.Let me know what you got. Wheels must be in great condition and tires should have at...

Nothing fancy just phone pics. Mike came over today to help me with my hood that I am not very found of. Decided since we had the two cars together we'd snap a few pics real quick.After the last month or so of knocking out a bunch of little projects on 1101 and seeing #3, I'm getting more...

I was replacing the O rings in my Galant and ended up messing up a line. I need to replace it ASAP since it is starting to get really hot. Have cash in hand and would really like to have it over nighted if possible. Here is a pic of the line in question. It goes from the receiver dryer to the...

Im tying to fix the a/c in 1101 but have run into a problem, the a/c clutch wont kick on. I tried to fill the system and the pressure went up in the low side but started getting really high and the compressor was doing nothing. I have checked the relays and they seem to be working, I had it on...

Like the title says I am looking for the little bucket that bolts to the door that the speaker bolts to.Let me know what you got and what you want for it.Thanks, Michael

N/T throttle body for sale. A little dirty but in good shape. Looking for 100.00 plus shipping.Extra 1G/GVR4 intake. Pretty clean and has all the nipples. 50.00 plus shipping.1G vent bezel for SAFC. 20.00 plus shipping.Engine/Tranny mid plate for a 6bolt AWD. 25.00 plus...

1101 needs wheels bearings from what I can tell....noise doesn't change with braking, turning, and is consistant in volume with vehicle speed.I have been looking for bearings and see that only one is used on each side. Is that correct? I have never done them on a DSM/GVR4 but most cars have...

I need to stock soft piping that goes over the exhaust manifold as well as the piece that goes from the BOV pipe to the TB. Must be in good condition and I'm hoping to spend about 40.00 for the pair.Let me know what you got.

Finishing up the last little things before tryng to fire up 1101 and I can't figure out what plug goes to what. Here are the two plugs I have that are by the intake off the firewall. I know one goes to the knock sensor and one goes to the EGT probe in the EGR valve (CA car) but don't know which...

We have a monthly DSM meet in the second Thursday of every month. Anyone can show up it doesn't have to be DSMs only, in fact most the old school guys that show up don't even have DSMs anymore.It's a pretty low key type of thing and most people start showing up around 7-8 and it's goes...

I have tried to explain to people how to use a nut and bolt to remove a pesky rotor and can never really explain it very well. Since I was doing just that tonight I decided to take some quick pics so people can see what I'm talking about.Something to keep in mind if the rotor is really stick...

As I was putting the axles in 1101 the other night I noticed something didn't seem right with the brakes. As I started looking over everything I noticed that the bolts for the calipers were super loose as were the ball joints. As I started to tighten them down and figured out why the brakes...

I have been wrapping up the motor for 1101 and ran into a problem. I got the hard lines for the coolant put on and was getting ready to install the new rubber lines but it looks like I am missing a nipples someplace. I have searched here and on Tuners but can't find a pic or a good description...

Dale is an great guy. When I needed some little parts he came to the rescue and had everything I needed. On one ocassion he even drove over 100 miles to bring parts to people in Phoenix including myself. Can't ask for better service.Would easily buy from him again in a heartbeat.

Found everything.

In my journey to get 1101 back on the road I have found a few interesting things. The one that has me the most concerned is the tranny case. It looks like who ever pulled it out thought that the tranny would come off the bell housing kinda like an old T5 or the like. They took a majority of the...

Both inner CV boots on 1101 were torn so I decided to rebuild them. I only show how to do one but they are all the same with the exception of the boot shape and I'll explain that a bit later. This can be a really messy job so make sure you plan accordingly with rags or towels. Mine just recently...

Found

Found.

In my quest to bring back my old Galant I found a new 6 bolt for it with a catch....it has really bad compression in one cylinder. From basic text conversations he says it just needs new rings and it should be good to go. Of course I'm going to compression test with and without oil as well as a...

I have always had regrets after selling 1101 a few years back. It was a great solid car and was clean. Over the years it passed through a few hands and I found the current owner here on the the ORG. He was making a good effort to get it back to it's former glory but sadly sometimes life happens...

I have tried all my local forums and figured it couldn't hurt to post up here. I am trying to buy 1101 back from the current owner but it's in JSB status. I need a 6 bolt to get it running and driving hence the add.Let me know what you got.PS. Driggs if you're reading this I know what you...

Looking for one of these for a buddy. He has bought a few but they all had broken tabs and he is looking for one with working tabs. Let me know what you got with a pic showing the tabs.Thanks, Michael

I have a few left over parts that I no longer need.All prices are plus paypal fees unless you send as a gift.1 set of JDM 510's 90K on them. 60.00 shippedAutometer A/F gauge. Yeah, yeah, yeah....it's a blinky light gauge. 20.00 shipped. Fill up and empty slot in your gauge pod or...

Bought these awhile ago when I was building my GTO exhaust and only needed 2 of the 4 I bought. They are brand new and have only been taken out of the package to look at and take pics.Looking for 50.00 for the pair PLUS shipping and paypal.

After a few years and some work #3 is back on the road. A few little things to tinker with to make it 100%, including a full tune, but for now it runs under it's own power and has a few more miles on it. At only 10 psi it pretty fast and with 25+ pounds on E85 it should scream.Here is a...

I am selling my 2005 Midnight Blue Metallic GTO. The car just rolled over 31K and is in almost perfect condition. The interior is a 10/10. No scratches, scrapes, burns, holes, or anything inside. The exterior is fairly similar and maybe a 9-9.5/10. The only flaws are some small rock chips on...

I already hit the part number list but didn't see a few things listed. I always double check to make sure I have the correct part number before ordering from my local dealer because they always screw up my order if I don't.Looking for a few things.Banjo bolt for the turbo oil feed that...

The only person to give me a reasonable price for a TOB clip. He shipped it quickly and the packaging was amazing and kept the clip from getting bent.This was the perfect transaction, great seller.

I am looking for a shot of the rear of a 6bolt complete motor with no flywheel or spacer plate installed. I had a block machined and it looks like the machinist may have missed a galley plug.

As usual my local dealer is not much help. I need the gasket that goes between the oil pump and the pick up. A simple request one would think but I guess not. I have generic gasket paper I could use to make one, but if I can get the correct gasket locally I would much prefer that route.Thanks...

I am going to do the suspension on the Galant, and clean it up of course, and want to replace ball joints and bushing while I am at it. After looking around I have two options:1. An entire kit, whole car, from Energy Suspension for 130.002. Just the bushings I need, 4 pairs, from...

I bought a set of 93 headlight from Garfield Wright that were in excellent condition. Thanks GW. The down side was that they were pretty dirty and I wanted them to look better. I was going to just try and clean then up with a shop rag and call it done, but my anal nature (no homo)...

Last weekend I received a set of mint 93 headlights from our own Garfield Wright. They were in very good condition, but as everything else in life they could have been better. A weekend being bored + my anal nature (no homo) + trip to Ace hardware = Super mint 93 headlights.For now I have...

Yesterday I was on my way to pick up my son. The lady in front of me gets a green arrow and does nothing but jabber away on her cell phone. After a few seconds I honked my horn at her. Now this was the first time I have honked the horn in my Galant and I was very suprised.As soon and it...

I am going to be redoing an extra headliner I have for the Galant in black suede. When I do this it will drive me crazy to have the stock grayish interior plastic pieces with a black headliner.I see that VHT sells a plastic paint that claims to not peal or wrinkle plus it comes in factory...

I have never been into car stereo's and figured that as long as it played music it was good enough for me. I am now looking to upgrade the audio stuff in the Galant and make a nice, not crazy expensive, but nice sound system. I am a hardocre do it yourselfer would like to learn as much as I can...