GalantVR4.org The Mitsubishi Galant VR-4 Forum
Galant VR-4 Forums » Galant VR-4 » General VR4 Discussions » GVR4 specific custom engine and chassis wire harnesses
Previous thread Next thread

GVR4 specific custom engine and chassis wire harnesses


dillon233
Newbie
967/2000


Galant VR-4 org Post #: 1221333 posted 12/05/15 10:08 PM     Remind Me!  Send Private Message   Edit Post      
Hey everyone, I'm joining up with my friend that makes custom harnesses for Formula Drift cars to make Galant specific harnesses.
Prices will come later and depend on how customized the customer wants, for now, I'm trying to get a head count on legitimately interested people. Most likely we will start with the engine harnesses and then move up to the chassis harnesses. I have an extra set of both harnesses to use as templates, but have been asked about auto trans harnesses and would need to get an auto harness to get everything laid out correctly. We are able to wire Haltech, AEM, and stock ecu for Ecmlink.

My friends company is MSPEK Performance based out of Denver and I will be working with him to produce these harnesses.

Attached is a photo of my tucked galant bay that I wired myself and photos of Kacey's engine harness that he made for a S14 running AEM.




Posts: 23 | From: Denver, CO | Member Since: 05/20/13 | IP: (64.233.172.199) | Report this post to a Moderator

bowler31185
Junior Member


Galant VR-4 org Post #: 1221334 posted 12/05/15 11:08 PM     Remind Me!  Send Private Message   Edit Post      
Depending on the price, I would be interested.

Posts: 34 | From: St Petersburg, FL | Member Since: 05/04/12 | IP: (75.76.85.119) | Report this post to a Moderator

car_guy
Junior Member


Galant VR-4 org Post #: 1221336 posted 12/05/15 11:15 PM     Remind Me!  Send Private Message   Edit Post      
I'm interested, but curious to see price ranges first. Would just like to get mine cleaned up and running wires to ECMLINK for fan control and SD inputs (IAT, MAP).

Posts: 60 | From: Farmington, NM | Member Since: 07/13/15 | IP: (97.123.16.64) | Report this post to a Moderator

unistylef
Member
996/1000


Galant VR-4 org Post #: 1221337 posted 12/05/15 11:39 PM     Remind Me!  Send Private Message   Edit Post      
Im interested



996/1000 A87 VR-4 Belize Green

Posts: 167 | From: San Diego, CA | Member Since: 06/25/12 | IP: (76.88.72.159) | Report this post to a Moderator

galantgti
Junior Member


Galant VR-4 org Post #: 1221341 posted 12/06/15 03:26 AM     Remind Me!  Send Private Message   Edit Post      
Interested as well.



1989 Galant GTi-16v White 145hp
1992 Galant GTi-16v Black 144hp RIP
1978 Buick Skyhawk 3.8 V6 110hp RIP
1997 Galant GLXi 136hp Green RIP
2000 Opel Omega 2.5 V6 Irmscher 208hp RWD
1991 Galant GTi-16v Dynamic 4 (4ws/4wd) 4g63T 220hp

Posts: 92 | From: netherlands | Member Since: 06/19/15 | IP: (84.84.197.110) | Report this post to a Moderator

jnava Galant VR4.org Moderator
Senior Member
57/2000


Galant VR-4 org Post #: 1221342 posted 12/06/15 06:09 AM     Remind Me!  Send Private Message   Edit Post      
This looks good

Posts: 2044 | From: Arlington, Tx | Member Since: 04/18/08 | IP: (76.199.251.252) | Report this post to a Moderator

mitsuturbo
Banthony
555/1000


Galant VR-4 org Post #: 1221353 posted 12/06/15 11:34 AM     Remind Me!  Send Private Message   Edit Post      
I'm doing my own now. If all goes well, you may have some competition.



92 GVR4 555/1000 11.41 @ 128.26mph
97 CBR900RR
2012 Hyundai Veloster

Posts: 3530 | From: Near Seattle, Washington | Member Since: 06/02/08 | IP: (73.221.235.17) | Report this post to a Moderator

bluzvr4
Junior Member


Galant VR-4 org Post #: 1221369 posted 12/06/15 09:14 PM     Remind Me!  Send Private Message   Edit Post      
interested in a harness for a auto



73 Opel gt (race car)
51/2000 (being built now)
94 vr4 (the pretty one)

Posts: 57 | From: san jose IL | Member Since: 02/21/11 | IP: (2601:247:4100:29) | Report this post to a Moderator

BENE38A
Slanging Kiwi parts


Galant VR-4 org Post #: 1221375 posted 12/07/15 02:26 AM     Remind Me!  Send Private Message   Edit Post      
interested



1991 Mitsubishi Galant vr4 RS

Posts: 261 | From: New Zealand | Member Since: 09/02/13 | IP: (116.251.150.137) | Report this post to a Moderator

Ben
Member


Galant VR-4 org Post #: 1221422 posted 12/08/15 07:15 AM     Remind Me!  Send Private Message   Edit Post      
I might be interested as that is the only thing preventing me from starting/driving mine. It's been sitting in my shop for 3-4 years! I got pretty far into building my own harness, but it became too time consuming for the amount of free time I have. Got into racing dirt bikes.

Posts: 199 | From: Lubbock, Tx | Member Since: 01/14/09 | IP: (75.111.204.236) | Report this post to a Moderator

mitsuturbo
Banthony
555/1000


Galant VR-4 org Post #: 1221429 posted 12/08/15 10:11 AM     Remind Me!  Send Private Message   Edit Post      
Quoting dillon233:



Attached is a photo of my tucked galant bay that I wired myself and photos of Kacey's engine harness that he made for a S14 running AEM.






Where did the under hood fuse box go?



92 GVR4 555/1000 11.41 @ 128.26mph
97 CBR900RR
2012 Hyundai Veloster


Edited by mitsuturbo (12/08/15 10:11 AM)

Posts: 3530 | From: Near Seattle, Washington | Member Since: 06/02/08 | IP: (50.47.82.7) | Report this post to a Moderator

dillon233
Newbie
967/2000


Galant VR-4 org Post #: 1221464 posted 12/08/15 09:59 PM     Remind Me!  Send Private Message   Edit Post      
I relocated it to my glove box. I know a few galant owners that have tucked theirs to the drivers side fender well where ABS used to be.

Posts: 23 | From: Denver, CO | Member Since: 05/20/13 | IP: (66.249.80.32) | Report this post to a Moderator

dillon233
Newbie
967/2000


Galant VR-4 org Post #: 1221467 posted 12/08/15 10:29 PM     Remind Me!  Send Private Message   Edit Post      
UPDATE: Should have pricing by Friday. Just finishing up pricing with all of the needed connectors. Found a vendor that can supply new ecu plugs.
These harnesses will have 100% new connectors, new wiring, braided nylon loom, heat shrink, and quick connect injector clips.
Basic harnesses will be a stock remake and stock path harness runs.

We can customize:
- every piece of the harness and different wiring runs
- colored looms
- fireproof/high heat loom
- connectors
- speed density
- gauge wiring in loom
- sensor/connector deletes
- AEM / Haltech / Evo 8 / stock ecu
- automatic transmission / tcu wiring
- etc

Obviously additional / custom builds will change price depending on request

Once we decide pricing, we will start a group buy on the .org. The more people, the better the pricing.
We are considering opening this up to the 1g crowd as well to get more people. Maybe 2g too.

We are planning on making all of the harnesses throughout a week so we can get them back to everyone as soon as possible.

Posts: 23 | From: Denver, CO | Member Since: 05/20/13 | IP: (66.249.80.50) | Report this post to a Moderator

galantgti
Junior Member


Galant VR-4 org Post #: 1221472 posted 12/09/15 12:13 AM     Remind Me!  Send Private Message   Edit Post      
I would be very interested, but my car has oem headlight washers. Would it be possible to include that wiring in the loom?



1989 Galant GTi-16v White 145hp
1992 Galant GTi-16v Black 144hp RIP
1978 Buick Skyhawk 3.8 V6 110hp RIP
1997 Galant GLXi 136hp Green RIP
2000 Opel Omega 2.5 V6 Irmscher 208hp RWD
1991 Galant GTi-16v Dynamic 4 (4ws/4wd) 4g63T 220hp

Posts: 92 | From: netherlands | Member Since: 06/19/15 | IP: (84.84.197.110) | Report this post to a Moderator

jeverts
Member +
909/1000


Galant VR-4 org Post #: 1221476 posted 12/09/15 07:22 AM     Remind Me!  Send Private Message   Edit Post      
Im in

Posts: 305 | From: Hartford, WI | Member Since: 07/14/11 | IP: (23.30.240.177) | Report this post to a Moderator

Street Surgeon
Professor Street Surgeon
501/1000


Galant VR-4 org Post #: 1221491 posted 12/09/15 09:37 AM     Remind Me!  Send Private Message   Edit Post      
Probably in as well, my harness is a lil' crispy after 254k of desert heat



Cory O.
'92 Mitsubishi Galant VR-4 501/1000
Heavily modified, barely driven, some assembly required.

Posts: 941 | From: Omaha, Nebraska | Member Since: 03/03/04 | IP: (132.3.49.78) | Report this post to a Moderator

dillon233
Newbie
967/2000


Galant VR-4 org Post #: 1221538 posted 12/10/15 12:19 AM     Remind Me!  Send Private Message   Edit Post      
Quoting galantgti:

I would be very interested, but my car has oem headlight washers. Would it be possible to include that wiring in the loom?



That's awesome, I think the washers would be integrated into the chassis harness, not the engine harness, correct?
We are starting with engine harnesses and then going to chassis later. Either way, we would be able to integrate those if we could at least receive pictures of the connectors used for the stock washers.

Posts: 23 | From: Denver, CO | Member Since: 05/20/13 | IP: (64.233.172.207) | Report this post to a Moderator

galantgti
Junior Member


Galant VR-4 org Post #: 1221546 posted 12/10/15 09:17 AM     Remind Me!  Send Private Message   Edit Post      
^ all I needed to know. I'm in!



1989 Galant GTi-16v White 145hp
1992 Galant GTi-16v Black 144hp RIP
1978 Buick Skyhawk 3.8 V6 110hp RIP
1997 Galant GLXi 136hp Green RIP
2000 Opel Omega 2.5 V6 Irmscher 208hp RWD
1991 Galant GTi-16v Dynamic 4 (4ws/4wd) 4g63T 220hp

Posts: 92 | From: netherlands | Member Since: 06/19/15 | IP: (84.84.197.110) | Report this post to a Moderator

Vince
Junior Member
1212/2000


Galant VR-4 org Post #: 1221746 posted 12/14/15 10:06 PM     Remind Me!  Send Private Message   Edit Post      
Interested...
Stock loom has been cut/spliced/patched so any times thanks to brittleness, it looks like hell under my hood!



Resurrecting Nile Black 1212/2000

Posts: 61 | From: Puget Sound, WA | Member Since: 01/31/15 | IP: (24.113.52.225) | Report this post to a Moderator

SteveDSM
Member
1000/1000


Galant VR-4 org Post #: 1221750 posted 12/15/15 12:16 AM     Remind Me!  Send Private Message   Edit Post      
I am also very interested!



-92 Galant VR-4 #1000/1000 LAST ONE!!!
-PTE 6157 @ 15 psi with all supporting mods
-88 Chrysler Conquest
-Fully built G54B, Multi-port conversion,
GT4088R, and much, MUCH more

Posts: 167 | From: Chicago, IL | Member Since: 11/27/07 | IP: (107.213.175.130) | Report this post to a Moderator

Mn92gvr4
Member
936/1000


Galant VR-4 org Post #: 1221816 posted 12/16/15 09:42 PM     Remind Me!  Send Private Message   Edit Post      
I am in, as long as the price isn't outrageous.



936/1000-almost going places
95 Honda civic notec DD

Posts: 110 | From: North branch mn | Member Since: 01/11/14 | IP: (96.2.107.18) | Report this post to a Moderator

dillon233
Newbie
967/2000


Galant VR-4 org Post #: 1221819 posted 12/16/15 11:01 PM     Remind Me!  Send Private Message   Edit Post      
Connectors were more than we expected, but if 20+ people sign up, it'll be the same price as the competitors. But made with higher quality and standards.

On the group buy, specify what connectors you'd like changed or deleted. And Auto/Manual
If you want AEM or Haltech, also specify.

I'm going to open this up to the 1g guys so hopefully we can have a larger group buy to reduce the price for everyone.

Also, specify what type of MAF/SD you'd like us to wire in.

For any questions or custom loom/connectors/wire route, feel free to pm me.




GVR4 / 1g DSM Harness Deal (stock remake harness)

Manual
1-9 in group buy $800

10-19 in group buy $750

20+ group buy $700

Auto (tcu wiring or tcu delete)
Need 1 supplied harness to make template
1-9 total in group buy $900

10-19 total in group buy $850

20+ total in group buy $800

Can wire leads to open ecu inputs for fan control, boost, wb02, etc

-Dillon

Posts: 23 | From: Denver, CO | Member Since: 05/20/13 | IP: (64.233.172.207) | Report this post to a Moderator

Scientist
Secretary of the Interior


Galant VR-4 org Post #: 1246215 posted 05/28/19 10:35 AM     Remind Me!  Send Private Message   Edit Post      
Still available?

Lookin to get a custom haltec harness done



1988 VR4....Needs a lot of TLC

Posts: 531 | From: Roseau/Dominica | Member Since: 01/18/07 | IP: (199.189.115.30) | Report this post to a Moderator

raptorWagon
less than one year to my birthday
1350/2000
362/1000


Galant VR-4 org Post #: 1246225 posted 05/31/19 12:46 AM     Remind Me!  Send Private Message   Edit Post      
OP hasn't logged into the forum in over a year....so probably not considering this is also over 4yrs old



92 Galant VR-4 362/1000
76 Galant Coupe
79 Galant Sigma Wagon
88 Fiji Blue Starion
94 Montero SR

Posts: 2734 | From: Oak Harbor, WA | Member Since: 05/17/07 | IP: (2601:601:4500:52) | Report this post to a Moderator

Drewpy_Dawg
Newbie


Galant VR-4 org Post #: 1246228 posted 05/31/19 07:30 AM     Remind Me!  Send Private Message   Edit Post   
Ohm-Racing offers a harness for DSM's with custom options (Haltech, AEM, etc). They may be able to do a GVR4 specific harness. Price starts at $950.

click



1991 Eagle Talon Tsi AWD
in process of resurrection after 14 years

Posts: 19 | From: Sachse, Texas | Member Since: 05/08/19 | IP: (47.184.184.7) | Report this post to a Moderator


Pages: 1
Previous thread Next thread

Extra information
1 registered and 29 anonymous users are browsing this forum.

Galant VR4.org Moderator:  curtis, steve, atc250r, jcgalntvr4-244, cheekychimp, jepherz, Rausch, toybreaker, iceman69510, pot, FlyingEagle 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3685

Rate this thread


News & Events: News | Events
Galant VR-4: Newbies | General VR4 Discussions | Technical Discussions | How To and Info Archive
Marketplace: Parts For Sale | Cars For Sale | Good Guys | Bad Guys
Community: Members' Showcase

Contact Us | Privacy statement GalantVR-4.org

Generated in 0.118 seconds in which 0.083 seconds were spent on a total of 14 queries. Turbo powered.


Hertz's Galant VR-4 Page