Problem after replacing pads

[WesternMD_VR4]

Could be a simple question or what but I just had the brake pads replaced on all 4s when I got it it felt a lil sluggish something wasn't right and now the steering wheel is so bad aligned I have to hold onto it to keep me from going off road, I made a U-turn and I heard a click and my alignmentagocallu fixed itself only it was ever so slightly to the left this time.. All this from replacing brake pads? What's going on

 

[G]

You probably got the caliper guide pins mixed up. Top and bottom, causing the front brakes to squeeze incorrectly and not let go.

 

[iceman69510]

Possible sticking caliper piston from being pushed back in, or some kind of interference possibly?

 

[WesternMD_VR4]

ok so apparently the springs are so loose in the struts (he said he has never seen them this loose>??) so when he lifted it up and lowered it they werent in there properly and they were sliding around when i turned around and thats why i heard all that clicking noise...he had to hold the springs as someone lowered the car,the car is running the bilstein struts off a evo 8 and tein s tech springs...anyone heard of this?

 

[theevozero]

I have a set of those springs mounted on agx struts. The fronts are never loose, even with the suspension completely unloaded. The rears however are loose in the seat.