Info for adjusting TPS ?

[mk2davis]

I've searched for info regarding TPS adjustment using a DMM, but the only results I found refer to a .plymouthlaser.com/tps link that is dead.

There is a bunch of info I have found for other markets (OZ, JDM), models, generations.... and I'd rather not guess

 

[EMX5636]

Should be 0.48-0.51V at idle. DSMLink wants to see closer to 0.63v (and that is where the 2G Idle switch is activated).

 

[mk2davis]

Between what wires? Green and white and earth?

 

[EMX5636]

Between the signal out wire (should be Green/wht) and ground (Green/blk)

 

[fuel]

I used the wayback machine to find the page that was on vfaq.com regarding TPS adjustment.