The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey. Login to browse without most ads.

FS: Garage Clean-out (roof rack, valve cover)

Gvr4-330

Well-known member
Joined
Dec 30, 2001
Messages
1,565
Location
DC
Hello all,

I am slowly going through all my Galant stuff and selling off the things I don't need anymore.

I currently have the following:



Black Powdercoated DSM Valve Cover - $150+shipping

This was professionally refinished with a black powdercoating, but I never got around to installing it, so it is as perfect as it can be.



 
Last edited:

Gvr4-330

Well-known member
Joined
Dec 30, 2001
Messages
1,565
Location
DC
Visor is sold!
Wheel sold on eBay.

OEM Mitsubishi Sunroof Deflector - $30+shipping SOLD

OEM Mitsubishi wind deflector for the moonroof. Includes all mounting hardware.



ONE Enkei RPF1 wheel in Gold - $125+shipping - SOLD
Size is 17x8, bolt pattern is 5x114.3, offset is 45, bore is 73mm
I purchased this to test fit over a set of brakes for the VR4. Because of this, it has one scrape on the inner barrel. Not too deep, just needs some touch up paint.


Radio Harness for Aftermarket Stereos - $10 shipped - SOLD

Add an aftermarket radio without cutting up your existing harness. New, never used.


OEM Roof Rack and Rain Channel Rails - $250 shipped - SOLD

This is the OEM roof rack, made by Thule. It includes the bars, the four feet, locks and keys, and the rain channels covers with the cutouts for the feet. These aren't the standard rails that have been cut; these were made specifically for use with the rack.

The feet do have some bubbling and some missing paint. I am missing 2 of the rubber trim pieces that sits at the base of the feet (I never used them and they are not in the pics either) and one of the 8 internal clamps is missing the rubber trim (see pics). 2 of the feet are missing the clamping knob, but a 10mm socket can be used instead. I do not have the plastic covers that mount to the roof rails when the rack is removed. I do have the allen wrench that sits inside one of the covers and that is included.

 
Last edited:

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,298
Location
VA
I'll take the harness. I'm in Germantown if you just want to meet up. Thanks!
 

Gvr4-330

Well-known member
Joined
Dec 30, 2001
Messages
1,565
Location
DC
Bump... Anyone looking for a roof rack who wants to make an offer?
 
Last edited:
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top