FS: Cylinder heads

[VR4Scott]

I've acquired a bunch of heads from a company that owed me money. Willing to let most of these go fairly cheap, hoping to break even with what they owed me. A lot of them are already cleaned, bead blasted, machined, and some of them are even ported. Here's the list:

2 - 2g dsm heads complete $150

1 - 2g dsm head bare $120

3 - 1g dsm heads $100

1 - SRT4 Neon head? , machined, no caps $60

3 - 420a Eclipse/Neon heads, 1 machined $50

2 - 350z VQ35? heads - machined and ported, no caps $200 for both

2 - 3000gt vr-4 heads, machined, no caps $150 for both

2 - 2.4 SOHC 4G64 heads, 1 machined and ported $120 and $80

1 - S15 SR20 head, machined, with SS Nitrided valves and new stem seals $300

1 - S13 SR20 head, machined, no caps $100

2 - Subaru STi heads (casting S20 005 LH and RH), complete including valve cover $400 for both

1 - 1.8 LS non-vtec head, ported and machined, no caps $100

 

[GSX_TC]

are the 1g heads bare or complete?

 

[CutlassJim]

Is the 4G64 head early or late style? i.e. Timing belt on drivers or pass side?

 

[VR4Scott]

Quoting GSX_TC:
are the 1g heads bare or complete?



I think 2 of them are bare, I know 1 of them has no cams and 16 bent valves. I'll check in a little bit.

The 4g64 heads are both from 99-03 galants or the 3g eclipses.

 

[GSX_TC]

Yeah man, Can check those other 2 out for me, as long as one of them has valve guides, and valves in it with no bent Valves i'll get one.

 

[VR4Scott]

The other 2 are bare.

 

[GSX_TC]

Damm I just can't get a break.. Thanks man