FS: 6 bolt crank, modified 02 housing, etc... Price drop...Again

[SleepinGVR4]

First up is a knife edged and balanced 6 bolt crank. Came out of a buschur stage 3 short block. I had my machine shop mic the crank. Crankshaft specs are 2.2434 - 2.2441. The crank mains mic'd at 2.243. The crank has around 30K miles on it.
$125.00





Next I have a Megan racing 02 housing. I modified the dump to specifically work and clear the front crossmember on a Galant. It is ceramic coated, some of the coating has come off in spots but it still works. I had the 2 bolt flange replaced with a v-band flange. Some how I lost the other v-band flange but they are cheap to pick up. However it does come with the v-band clamp. The only thing I'd have done to it is have the 02 flange milled flat. I think it got warped in the welding process. If you don't have access or know anyone that can do this. Let me know and I can get it milled, but this will effect the price.
$50.00






Gorilla Lug nuts 12mm X 1.50. Comes with 16 lug nuts but no locking lugs. I don't have the hex socket but it shouldn't be hard to find one. Part # 21733
$25








Misc. AN fittings.
One 45 deg -10AN pushlock $10
One 90 deg -10AN pushlock $10
One 90 deg -10AN hose fitting $10
One straight -10AN hose fitting $5
Two -10AN to AN male unions $5 each







The prices are negotiable and DO NOT include shipping. And I'll accept paypal to [email protected] This isn't my paypal so If you would like to purchase something PM me and I'll have my buddy confirm payment.

Thanks

 

[CutlassJim]

Hate to break it to you but that looks like a completely stock crank. Knife edging makes the counterweights sharp, like knives, like this.

 

[SleepinGVR4]

I know, this crank was hand knife edged. I don't believe buschur does them like this anymore. If you still don't believe me I can take another picture to show you.

 

[thedsmguy]

Ya must admit, that first picture wasn't the clearest at showing the knife edging.

Good luck with sale!

 

[SleepinGVR4]

Bump! Plus price drop

 

[SleepinGVR4]

ttt

 

[SleepinGVR4]

Bump!

 

[SleepinGVR4]

TTT plus crank price drop.

 

[SleepinGVR4]

02 and crank price drop, ttt

 

[SleepinGVR4]

Bump

 

[bmod530]

I am in need of a crank ASAP. How do the rod journals check out? I'm looking to purchase soon.

Thanks!

 

[SleepinGVR4]

Everything checked out good. I'm looking for the paper my machinist printed all the measurements on. I'll put it up when I find it.