Yo I’m new here I recently have got a 91 galant number 0837 I need to do the wheel bearings I’m starting with the front. I’ve bought the inner and outer seals for both sides and new bearings is that all I’ll need parts wise. I’ve seen people say to replace the snap rings is that really necessary or are they ok to reuse.

Nice to have you hear

Welcome to the forum! Congrats on the GVR4. If you can, post some pictures and let us know what plans you have for the car.


Regarding your question: yes, parts-wise you should be good to go with the bearings and seals. As for the snap rings, you can definitely reuse them as long as they aren't bent, badly rusted, or damaged during removal. Just make sure to thoroughly clean the snap rings, as well as the bearing and snap ring housing before putting everything back together.

Alright thanks and I’ll post pictures in a bit. The plans for the car as of right now is get it running to daily driver ability. It needs some love I wanna upgrade the radiator and fan I’m in the process of getting ecmlink v3 right now. The car apparently has deleted ac and balance shaft a smaller 16g turbo 550cc injectors bored .020 as light weight fly wheel. It needs a timing belt and the two smaller belts replaced to also the breaks are leaking from the master I think. It also needs a tune because the air fuel ratio is lean