GalantVR4.org The Mitsubishi Galant VR-4 Forum
Galant VR-4 Forums » Galant VR-4 » Technical Discussions » Wiring Diagram for EvoIII Ecu
Previous thread Next thread

Wiring Diagram for EvoIII Ecu


toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885525 posted 03/28/10 01:26 PM     Remind Me!  Send Private Message   Edit Post      
Need a diagram, including the mpi relay circuitry.

Please, post it up.

Many thanks!



the bitterness of low quality remains long after the temporary joy of a low price has faded

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.171) | Report this post to a Moderator

RedTwo
Rangi Kiwi


Galant VR-4 org Post #: 885577 posted 03/28/10 06:40 PM     Remind Me!  Send Private Message   Edit Post      
I think I've got a pin out for the ECU at home somewhere, is that waht you're after?

Posts: 1917 | From: New Zealand | Member Since: 07/16/08 | IP: (210.54.239.228) | Report this post to a Moderator

toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885609 posted 03/28/10 09:12 PM     Remind Me!  Send Private Message   Edit Post      
RedTwo, thanks for the offer!

I found a pdf file earlier but couldn't get it to post.

I eventually found this image, and figured out how to post it.



What I really need is the actual engine wiring diagram, including the mfi relay.

Please.



the bitterness of low quality remains long after the temporary joy of a low price has faded


Edited by toybreaker (03/29/10 07:25 AM)

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.129) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 885621 posted 03/28/10 09:44 PM     Remind Me!  Send Private Message   Edit Post      
Yup that is pretty much it, Jeez thanks for all the help toy breaker, last time i remember you helped me figure out my starter problems, and now your helping me with the ecu wiring. Whether we crack down this problem or not, i really appreciate your help!

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator

toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885624 posted 03/28/10 09:52 PM     Remind Me!  Send Private Message   Edit Post      
We'll get you spoolin' soon enough.

Thing is, I don't want to give you bad advice, so I really need that full diagram so we can figure out some valid test points and a logical strategy.

I hate "guessing"



the bitterness of low quality remains long after the temporary joy of a low price has faded

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.161) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 885627 posted 03/28/10 10:07 PM     Remind Me!  Send Private Message   Edit Post      
Fair enough. Can you post a diagram of the 8-pin mpi relay? As far as i know 1g had the same i think? If we could see the details of the relay, i could check my cars wiring and see how much actually matches. That way we would know at least what is done right and what needs to be corrected. Till then hopefully we would get the evo wiring diagram and see how is it supposed to be done.
And well my cars wiring has been done on guesses, but those were bad ones, at least we know that 12v for pin62 and 12volt for pin#4 and pin#8 on mpi relay is sufficient to run the car. Oh well its morning here, and i am off to work now, i will read some evo forums at work and if i get some details, will post it up here.
Thanks Again!

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator

toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885636 posted 03/28/10 10:41 PM     Remind Me!  Send Private Message   Edit Post      
My friend, that's where the problem lies.

We got the 10 pin mfi relays in our Galant vr-4 s here in the states. It's a whole different animal, as it has two coils controlling the fuel pump. (it's the same unit found in the 1g talon, eclipse and laser turbo models.)

We do have an eight pin relay in the 2g's, but I'm hesitant to blindingly trust them as being the same.

The ecu/relay control strategies are probably the same, but I don't want to take any chances with your car.


We are very lucky to have a few members from the jdm market on this board, and hopefully one of them will see this, take pity on us, and post up the goods.

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.168) | Report this post to a Moderator

BOOSTIN HARD
Unregistered


Galant VR-4 org Post #: 885681 posted 03/29/10 06:51 AM     Remind Me!  Send Private Message   Edit Post      
I could look at my Evo III and tell you what color the wiring is on the relay. Then maybe we can see if the 2g is the same. The earlier evo's share much more in common then the 1g's. You guys tell me what to look for and I will check tonight. I am also looking for the entire schematic for my car. I think mrfixit has the info we are looking for. If someone could shoot him a PM today and ask him. He got me my cars alignment specs for me, so im sure he has access to the schematic.

I'll check back with you guys tonight, if you don't here from me just give me a call John.

| | | IP: (75.207.191.9) | Report this post to a Moderator

toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885686 posted 03/29/10 07:34 AM     Remind Me!  Send Private Message   Edit Post      
Thanks Chris!

I've got a 2g diagram, including the mfi relay.

A pic of the evoIII mfi relay would go a long way towards giving us the info we need to come up with some valid test points, and a strategy for troubleshooting the system.

Thanks again!



the bitterness of low quality remains long after the temporary joy of a low price has faded


Edited by toybreaker (03/29/10 09:23 AM)

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.131) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 885702 posted 03/29/10 08:27 AM     Remind Me!  Send Private Message   Edit Post      
Quoting BOOSTIN HARD:

I could look at my Evo III and tell you what color the wiring is on the relay.



That is great! Thanks!

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator

misterfixit
Victory Runner


Galant VR-4 org Post #: 885797 posted 03/29/10 03:43 PM     Remind Me!  Send Private Message   Edit Post      
**added CD4a wiring diagram for 4g92.** (missing page 100 though)

Specter, Toybreaker pmed me at the same time as me perusing this thread. I have many manuals, but the evo III is one i do not have complete coverage of. I do however have the chassis manuals for that generation lancer. in europe we got 4g13 and 4g92/4g93. Mitsubishi do tend to keep families of injection systems together. So here are the pages of the fuel section to cover the mpi relay and ecu supply/fuelpump supply (they do NOT have wire colours associated). I'll also post up the wiring from a 4g63 space runner (its sohc but the same ecu board as the lancer. I had to source one for a replacement for my sister in law's car in the philippines after the flooding). this has wire colours.

CD lancer (dohc 4g93 manual)






4g63 sohc spacewagon wiring manual






cd4a lancer






I hope this helps.

I have an idea I'll persue and i'll report back when i get a bit further.

Rich



92 UK 1800 GALANT DD
88 JDM E39A GALANT VR-4, running. But only just.
93 CB4A --- rewound
91 PDM GTI Resurection project. Aborted
Stuff Index


Edited by misterfixit (03/29/10 04:21 PM)

Posts: 1536 | From: Midlands, UK | Member Since: 08/04/04 | IP: (83.67.97.128) | Report this post to a Moderator

BOOSTIN HARD
Unregistered


Galant VR-4 org Post #: 885887 posted 03/29/10 08:48 PM     Remind Me!  Send Private Message   Edit Post      
You are the man Rich.

| | | IP: (75.204.61.129) | Report this post to a Moderator

toybreaker Galant VR4.org Moderator
it's peace of mind at 100 mph plus
1990/2000


Galant VR-4 org Post #: 885899 posted 03/29/10 09:21 PM     Remind Me!  Send Private Message   Edit Post      
Rich,

Thank you very much!

That will help Specter figure his problems out much better than me blathering about.



the bitterness of low quality remains long after the temporary joy of a low price has faded

Posts: 3457 | From: Never Summer Ranch, Colorado | Member Since: 04/30/06 | IP: (208.54.7.143) | Report this post to a Moderator

Telecaster
Senior Member
1581/2000


Galant VR-4 org Post #: 886055 posted 03/30/10 11:24 AM     Remind Me!  Send Private Message   Edit Post      
I did this a few months ago on my Evo 2. I rewired the a patch harness to run a 1g ecu/dsmlink v3 with the evo 2 harness. What exactly are you guys trying to figure out? The evo 123 harness is almost exactly the same as the 2g minus the 3rd plug on the ecu which has all the obd2 stuff on it.

Posts: 573 | From: San Jose, CA or Philippines | Member Since: 02/26/02 | IP: (121.54.96.13) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 886075 posted 03/30/10 12:53 PM     Remind Me!  Send Private Message   Edit Post      
Thanks a lot Rich. Those diagrams helped me a lot!
@ Telecaster : We were trying to figure out what are the connections on the MPI relay. Now what i am trying to figure out, from where do Pin #62 and Pin #60 gets it connection from, as well as the Pin #4 and Pin #8 on the relay.

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator

misterfixit
Victory Runner


Galant VR-4 org Post #: 886348 posted 03/31/10 03:14 PM     Remind Me!  Send Private Message   Edit Post      
do you want the power supply routing diagram then? that'll show the feeds to pin 4 and 8 in the engine bay fuseboard, is the 60 is from the engine bay and 62 from the ignition switch block. If you need the power supply routing shout and i'll post it up.

Rich



92 UK 1800 GALANT DD
88 JDM E39A GALANT VR-4, running. But only just.
93 CB4A --- rewound
91 PDM GTI Resurection project. Aborted
Stuff Index


Edited by misterfixit (03/31/10 03:18 PM)

Posts: 1536 | From: Midlands, UK | Member Since: 08/04/04 | IP: (83.67.97.128) | Report this post to a Moderator

BOOSTIN HARD
Unregistered


Galant VR-4 org Post #: 886431 posted 03/31/10 08:38 PM     Remind Me!  Send Private Message   Edit Post      
I think they need it Rich and even if they don't I will put it in my achive.

| | | IP: (75.204.16.46) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 886532 posted 04/01/10 09:15 AM     Remind Me!  Send Private Message   Edit Post      
Quoting misterfixit:

do you want the power supply routing diagram then? that'll show the feeds to pin 4 and 8 in the engine bay fuseboard, is the 60 is from the engine bay and 62 from the ignition switch block. If you need the power supply routing shout and i'll post it up.

Rich




Yes Yes please kindly post those diagrams too, they will enable me lay new wires and make the connections factory spec.

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator

misterfixit
Victory Runner


Galant VR-4 org Post #: 886636 posted 04/01/10 04:16 PM     Remind Me!  Send Private Message   Edit Post      
Right here goes.
I'm assuming for RHD is ok. LHD is a little different.
Fuse box and relay boxes:










Power supply routing:







Hope this helps!

Rich



92 UK 1800 GALANT DD
88 JDM E39A GALANT VR-4, running. But only just.
93 CB4A --- rewound
91 PDM GTI Resurection project. Aborted
Stuff Index

Posts: 1536 | From: Midlands, UK | Member Since: 08/04/04 | IP: (83.67.97.128) | Report this post to a Moderator

Specter
Member +


Galant VR-4 org Post #: 888303 posted 04/07/10 11:57 AM     Remind Me!  Send Private Message   Edit Post   
Thanks Rich! My car has started, thanks to your diagrams.

Posts: 367 | From: Karachi, Pakistan | Member Since: 04/20/08 | IP: (221.120.225.243) | Report this post to a Moderator


Pages: 1
Previous thread Next thread

Extra information
0 registered and 13 anonymous users are browsing this forum.

Galant VR4.org Moderator:  curtis, steve, atc250r, jcgalntvr4-244, cheekychimp, jepherz, Rausch, toybreaker 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating: *****
Thread views: 38901

Rate this thread


News & Events: News | Events
Galant VR-4: Newbies | General VR4 Discussions | Technical Discussions | How To and Info Archive
Marketplace: Parts For Sale | Cars For Sale | Good Guys | Bad Guys
Community: Members' Showcase

Contact Us | Privacy statement GalantVR-4.org

Generated in 0.121 seconds in which 0.078 seconds were spent on a total of 14 queries. Turbo powered.



Hertz's Galant VR-4 Page