alansupra94
Well-known member
Well I went to set the base timing. Grounded the timing connector and diagnose pin (3 from the bottom). Followed the instructions straight from Mitsubishi. The BISS was fine so I didn't not adjust it. I adjusted the timing to 5 degrees.
The problem is after I unplugged everything, the timing at idle is still 5 degrees and NOT 7-9 like the manual says. Motor has basically 2 miles on it and I am running Ostrich 2.0.
Thanks,
Alan
The problem is after I unplugged everything, the timing at idle is still 5 degrees and NOT 7-9 like the manual says. Motor has basically 2 miles on it and I am running Ostrich 2.0.
Thanks,
Alan