The_Big_Weave
Well-known member
Moving my engine around I bent my oil pick up a little bit up on each side. Bent it back with some pliers but the mesh is pushed it. Should I replace it or reuse it?
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
Bent oil pick up
- Thread starterThe_Big_Weave
- Start date
bazeng
Well-known member
You should be able to find another from another engine quite easily. I'd change it if it were mine.
Last edited:
toybreaker
iconoclast
- Joined
- Apr 30, 2006
- Messages
- 3,581
My damn dog keeps squarshing the speaker grills in my truck, and I've found I can pull them back out with a 90* or hook shaped pick tool.
I just go thru the one of the holes in the mesh, hook the tool thru, and the gently pull the screen back out.
A squarshed oil pump pick up screen is the same kind of a deal, so that trick might work for you as well.
Worth a shot. /ubbthreads/images/graemlins/smile.gif
[edit]
If you just bent the screen, you can straighten it, but be sure to check the pick up to pan clearance and make sure you didn't bend the pick up tube as well.
I just go thru the one of the holes in the mesh, hook the tool thru, and the gently pull the screen back out.
A squarshed oil pump pick up screen is the same kind of a deal, so that trick might work for you as well.
Worth a shot. /ubbthreads/images/graemlins/smile.gif
[edit]
If you just bent the screen, you can straighten it, but be sure to check the pick up to pan clearance and make sure you didn't bend the pick up tube as well.
Last edited:
