The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Cruise problem

Vman911

Well-known member
Joined
Sep 18, 2005
Messages
359
Location
Douglas county, Ga
Never really tried my cruise control till the other day. The light comes on but there is no accel or decel on the stalk. Hit the clutch or brake and light goes off like its supposed to.
Any Ideas where I can start? Thanks Vinman
 

GVR4_1057

Well-known member
Joined
Sep 3, 2008
Messages
676
Location
Brucetown VA
Also check the vacuum line from you cruise actuator to the cable box.
 

I have the same issue. Bought it without cruise control working and figure it's gotta be something pretty simple. Light on the cluster and handle work, just doesn't actually hold the speed. So I rigged up the buzzer as mentioned in the links to check for codes. I grounded pin 10 and 12, and then connected a buzzer to 5 and 12. I'm not getting any reading at all...does that indicate that the ECU thinks the cruise control is working properly or did I miss read the instructions?

If there is no trouble codes, what are the next steps in trouble shooting this?
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top