The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

2 cylinders misfire

OK let me start off with I'm new to VR4's but i do have plenty of mechanical knowledge. That said, my vr4 is misfiring cylinders 2 and 4. So i checked the coils and they are good, wires are good, plugs good. So basically it seems as if I'm not getting anything from the coil closest to the firewall. My only guess is that either the cam angle sensor is bad or the crank position sensor, now does that sound right? Any ideas would help, thanks.
 

marvinmadman

Well-known member
Joined
Nov 10, 2003
Messages
2,355
Location
Lafayette, Louisiana
I believe that if a coil went out, 4/1 or 2/3 would be missing together.
 

Ok my mistake its not 2/4, its 2/3. I had 2 extra coils and i've tried both of them and still misfire on 2/3. I did not know that the capacitors needed to be changed, i will probably replace those within a week. Is it possible it is the capacitors?
 

Problem solved replaced ignition control module and problem solved thanks guys!
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top