FCR
(Beware Car stops suddenly for parts by the road)
09/23/08 08:09 PM
FCR Grandpa 1352/2000 "HAVING FUN ATTACK MODE" "New Video"

Specs
1352/2000 Time Attack/SOLO 1 1991 VR4

Engine
2.3L Stroker
Eagle rods, CP pistons 9:1, Balance shafts removed
Ported 1g head
Cometic head gasket
Crower springs and retainers
HKS 264 Intake/264 Exhaust Cams
ARP Head Studs and crank main caps
Custom Intercooler and piping
Custom Intake manifold with a 65mm ford Throtle body
HKS Blowoff valve x 2
Tial 44mm wastegate
Stainless Manifold, downpipe, 3"complete exhaust with Apex'i N1 muffler (custom paint)
Garett GT3082R Turbo
Bushur coil pack
Oil catch can
Setrab oil cooler kit
Fluidyne radiator 27x17x4.5 dual pass(custom water lines)BERK/ARNLEY 160 Degree Thermostat
FAL Slim-line (pull) Maradyne 1500 cfm(push) radiator fans
850cc injectors
ACT 2900 / 6 puck clutch master disc, custom stainless braided line from clutch pump
4-Bolt LSD Rear diff
Aeromotive FPR and Filter 2 walbro 255 external pumps RCI 15gal fuel cell
Battery relocated
MOMO Steering wheel


Suspension tires brakes
KYB AGX Adjustable shocks struts
Eibach springs
Camber Plates

Racing Hart Pro series J5 wheels 19x8(street)
Volk Racing TE 37 Wheels 17x9/ Toyo Proxes RA1 tires 255/40/17(solo 1)

Brembo front caliperz with Project Mu (max 900)pads, Motul 660, stainless braided lines
ABS and rear steering removed
Varis Rear Voltex Diffuser (on JDM rear bumper)


Electronics
Microtech LTX 8
Defi gauges EGT, Oil P, Oil T, Rev, Boost, Water Temp in custom cluster with a carbon fiber plaque
PLX wideband
HKS Turbo Timer
Greddy Profect B Boost Controller














GIjoe
(lol, Im an idiot)
09/23/08 08:16 PM
Re: FCR Grandpa 1352/2000

bad ass

**DONOTDELETE**
(Unregistered)
09/23/08 08:17 PM
Re: FCR Grandpa 1352/2000

Welcome to the board!! Where from PR are you?? Will be glad to see these rides in person

ktmrider
(Cool Guy Crowd)
09/23/08 08:20 PM
Re: FCR Grandpa 1352/2000

Holy clap, that is one nicely modded example!
The IC piping looks huge plus I still see the A/C lines...


**DONOTDELETE**
(Unregistered)
09/23/08 10:20 PM
Re: FCR Grandpa 1352/2000

wow sweet car welcome to the board

**DONOTDELETE**
(Unregistered)
09/23/08 11:20 PM
Re: FCR Grandpa 1352/2000

welcome, and wow

sixsixtwo
(Member)
09/24/08 03:06 AM
Re: FCR Grandpa 1352/2000

lovin the custom gauge cluster!

eviLntt
(eVIL_DNB)
09/24/08 02:48 PM
Re: FCR Grandpa 1352/2000

Good looking VR4! Welcome to the board.

TylerAdamson
(circles method)
09/24/08 04:38 PM
Re: FCR Grandpa 1352/2000

What size are the coolant lines, -20? I run a -16 and those look massive compared to mine.

FCR
(Beware Car stops suddenly for parts by the road)
09/24/08 05:48 PM
Re: FCR Grandpa 1352/2000

i use -20 AND THANKS FOR THE COMMENTS


mistaVR4
(Rest in Peace)
09/24/08 06:03 PM
Re: FCR Grandpa 1352/2000

That VR4 you got there really looks great man You should submit this thread (or one VERY similar) maybe with a bit more info as far as how you got the car, and more about you..etc to the Members Showcase Section!

Great work man, glad to have you here!

-Steve


FCR
(Beware Car stops suddenly for parts by the road)
09/24/08 06:09 PM
Re: FCR Grandpa 1352/2000

Right now i'm working with some upgrades in the car(seats,jdm rear bumper, etc)them i'm going to that, thanks for the inf and comments..............

**DONOTDELETE**
(Unregistered)
09/24/08 07:24 PM
Re: FCR Grandpa 1352/2000

Nice car, welcome to the forum.

Hows that Microtech working out for you? I did some research on it and found this sweet video. Here


FCR
(Beware Car stops suddenly for parts by the road)
09/24/08 08:46 PM
Re: FCR Grandpa 1352/2000

my car works great on the street and track i have no problem with the ltX-8 thanks

FCR
(Beware Car stops suddenly for parts by the road)
09/26/08 08:47 PM
Re: FCR Grandpa 1352/2000




curtis
(Space Blanket from NASA plumbed into the attic)
09/26/08 09:13 PM
Re: FCR Grandpa 1352/2000

Yet another bad ass green car on the board.

Clean man clean and well put together.


jogalant
(jobidet)
09/27/08 11:19 PM
Re: FCR Grandpa 1352/2000

Your ride is smokin' hot Gramps. I love it.

FCR
(Beware Car stops suddenly for parts by the road)
09/28/08 02:30 PM
Re: FCR Grandpa 1352/2000

New update rear JDM Bumper


TylerAdamson
(circles method)
09/28/08 11:44 PM
Re: FCR Grandpa 1352/2000

Do you have any reasoning behind the double pass 4.5'' thick radiator?

FCR
(Beware Car stops suddenly for parts by the road)
10/01/08 09:37 PM
Re: FCR Grandpa 1352/2000

Time Attack/SOLO 1

boostingwild
(Member + Crap)
10/02/08 09:45 AM
Re: FCR Grandpa 1352/2000

nice

4Grim
(I deliver.)
10/02/08 10:11 AM
Re: FCR Grandpa 1352/2000

Wow...mods and general setup of your GVR4 is superb!

FCR
(Beware Car stops suddenly for parts by the road)
11/27/08 07:19 AM
Re: FCR Grandpa 1352/2000

Update
My new GT30R and VARIS REAR VORTEX DIFFUSER






4Grim
(I deliver.)
11/27/08 09:35 AM
Re: FCR Grandpa 1352/2000

I am assuming you are going to install those rear diffuser pieces on the GVR4. I am curious to see the final install pics. The GVR4 looks great...its clean and sweet setup!

**DONOTDELETE**
(Unregistered)
11/27/08 10:48 AM
Re: FCR Grandpa 1352/2000

I love how clean it looks too. Very nice!

**DONOTDELETE**
(Unregistered)
11/27/08 10:41 PM
Re: FCR Grandpa 1352/2000

WoW

FCR
(Beware Car stops suddenly for parts by the road)
12/22/08 06:31 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

New updates gt30r /Varis rear diffuser
Dyno 440HP 435TQ 18.5 PSI 10.8 a/f on pump gas






**DONOTDELETE**
(Unregistered)
12/23/08 07:16 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

Nice car, great outcome. I like that instrument cluster.
Mike R.


324vr4
(manly-loud yet refined)
12/23/08 08:50 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

MAJOR SEMI NOW...and I JUST got to work....anyone got a pillow?!

Polish
(Dr. Pilosh Haagenscodyberger)
12/23/08 09:08 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

Dang, nice job. I like the rear diffuser.

**DONOTDELETE**
(Unregistered)
12/23/08 09:29 AM
Re: FCR Grandpa 1352/2000

Quoting FCR:







This is why PR is so badass, I love this picture.

In SC There was an article written by Al Friedman, of Dynoflash.
He was interviewing this PR tuner named Gadiel who built this STi that went 10.0's

Anyways, the car was built on a dirt-floored "Shack" of sorts.

Dirt floor + Sti = 10's in the 1/4mile

Killer Galant! But i'm sure you've heard that already.


FCR
(Beware Car stops suddenly for parts by the road)
01/02/09 06:41 PM
Re: FCR Grandpa 1352/2000

A little road trip with some friends.............




belize1334
(well bread and nobly conceived)
01/03/09 06:14 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Is this on the stock 2.4L crank or the eagle crank?

FCR
(Beware Car stops suddenly for parts by the road)
01/03/09 08:35 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

the stock 2.4l

speedyvr4
(Still looking for the forest!)
01/03/09 09:44 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

COÑO!!!!! Thats a nice vr4.Not regular nice. I mean like, Jamaican NICE!!lol. well, if your from south florida, you'll know what I'm talkin' about.very nice ride. some kill videos would be nice also.congrats on the build.welcome aboard,send your vin and badge to iceman so we can add it to the registry.

RedTwo
(Rangi Kiwi)
01/04/09 03:06 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

What exactly is a GT30R? I would have thought it was a GT3082R (which I think it is in these parts) because GT35R = GT3582R but that shrouded compressor housing looks like a GT3071R or GT3076R.

Dialcaliper
(Flagration Member)
01/04/09 10:29 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

GT30, GT35, etc is the turbine design code - 71, 76, 82, etc is the compressor wheel diameter, and R is ball bearing center.

FCR
(Beware Car stops suddenly for parts by the road)
01/05/09 05:08 AM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Quoting RedTwo:

What exactly is a GT30R? I would have thought it was a GT3082R (which I think it is in these parts) because GT35R = GT3582R but that shrouded compressor housing looks like a GT3071R or GT3076R.



GT3076R .82 AND WORKS GREAT!!!!!!!!!!!!


icurunnin
(GVR4 Pimpin)
01/05/09 02:49 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

that car is freakin nice and well put together. great job on what these cars SHOULD look like and the power they should put down.

FCR
(Beware Car stops suddenly for parts by the road)
01/05/09 03:29 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Thanks for the comments Cooming Soon VP C16 AND 28 PSI. ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha

GVR-4
(Creative Name Huh?)
01/06/09 02:28 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Very nice. I especially like the gauge cluster too. Do you still have an open front diff? If not, I suspect something like a Quaife would help the handling coming out of corners on the road course.

Ralli380Gvr4
(Bearded Snow Leopard)
01/06/09 02:39 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Definatly grade A stuff right here. Time attack GVR4's FTMFW. Where can I get my hands on a Varis diffuser? do you know of any US distributers?

FCR
(Beware Car stops suddenly for parts by the road)
01/06/09 02:54 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Quoting GVR-4:

Very nice. I especially like the gauge cluster too. Do you still have an open front diff? If not, I suspect something like a Quaife would help the handling coming out of corners on the road course.



Thanks for your comment but this is a future upgrade not so far...


FCR
(Beware Car stops suddenly for parts by the road)
01/06/09 03:02 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Quoting Ralli380Gvr4:

Definatly grade A stuff right here. Time attack GVR4's FTMFW. Where can I get my hands on a Varis diffuser? do you know of any US distributers?



Thanks, i found the diffuser on ebay from a guy from Malaysia and i get it only in two weeks (USPS service and I'm from Puerto Rico) great seller!!!!!! The diffuser is for evo7-9, but i don't make a lot modifications to put in. If you interested, the item number for the diffuser on ebay is 280299740366 and he said that he still have 2 available.........


464/2K
(<3s Rance and self distrusts)
01/06/09 03:20 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

is it galant specific or just an evo?

Polish
(Dr. Pilosh Haagenscodyberger)
01/06/09 03:27 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

click

Listed as an Evo part, as I expected. Looks like he made it fit well though, I think it's sweet.


464/2K
(<3s Rance and self distrusts)
01/06/09 03:31 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

there is a company on yahoo japan auctions that make a e39a specific one thats why i asked.

Polish
(Dr. Pilosh Haagenscodyberger)
01/06/09 03:55 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Post a photo next time you see it, I'm curious what it would look like.

FCR
(Beware Car stops suddenly for parts by the road)
01/06/09 07:33 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Quoting 464/2K:

there is a company on yahoo japan auctions that make a e39a specific one thats why i asked.



do you have pics or link???????????????


464/2K
(<3s Rance and self distrusts)
01/07/09 12:36 AM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

click

click


RedTwo
(Rangi Kiwi)
01/09/09 02:24 PM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Basically, the first link is for a universal, fiberglass (finished in black), front diffuser that has to be riveted/bolted to your car. It's 1840mm wide and 975mm deep, so about 100mm wider than our cars.
The second link is to a universal, fiberglass, rear Type I (center) diffuser, they talk about the two Type II (side) diffusers as another auction. Also you have to cut a hole for your exhaust/muffler.

To tell the truth… there is the effect of car &#36620; weight 125Kg light weight!!

They spend 80% of their listing wanking on about their Toyota Levin time attack car and their local track, Mihama. Apparently, by fitting all sorts of universal wings and splitters that they make themselves, they cut 2.1 seconds off their lap time.


EUROU GT front diffuser something!!
70% OFF!!
Usually the commodity of 49,800 Yen
&#8595; &#8595; &#8595;
Intense it is cheap!
It is 14,800 Yen start. .
It does not flee. .


All your base are belong to us


G
(JDM Unit)
01/10/09 12:58 AM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

It'll fit a galant with mods but not specific. The japs like advertising the same product for different cars.

Hksvr4
(The New Vettel)
01/28/09 11:32 AM
Re: FCR Grandpa 1352/2000 ---UPDATE--- 440HP 18.5 PSI

Nice ride. If you can get your hands on '93 headlamps, it would make the front look cleaner.

Woody
(Junior Member)
03/17/09 07:58 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

Is that ext manifold custom made? Looks great.

FCR
(Beware Car stops suddenly for parts by the road)
03/18/09 02:36 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

Yes is custom ( stainless steel), thanks


FCR
(Beware Car stops suddenly for parts by the road)
05/12/09 06:25 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

My dyno run video i hope you like it!!!!!
click


324vr4
(manly-loud yet refined)
05/12/09 08:35 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

WOW...great numbers! And a good video to boot!

**DONOTDELETE**
(Unregistered)
05/12/09 10:13 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

awsome numbers and video. where the glow sticks at

Woody
(Junior Member)
05/12/09 10:31 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

Thats a well built car, good numbers.

omertaitalia
(Member +)
05/13/09 07:36 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

great car, i like the diffuser, whats the advantage of two bov's?

FCR
(Beware Car stops suddenly for parts by the road)
05/13/09 09:27 AM
Re: FCR Grandpa 1352/2000 --UPDATES--

TIAL bov 50.5 mm valve vs HSK SSQV 30mm x 2 = 60mm, better realese between shifts, i like the look and cool sound....

FCR
(Beware Car stops suddenly for parts by the road)
06/13/09 09:09 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

My daily car Galant 98 4G64 Turbo

Specs
Stock Internals
Garret TO3/TO4 turbo
Turbo Smart 38mm Wastegate
Greddy front mount intercooler with custom piping
Custon exhaust manifold with ceramic coat
Nippo Denso in tank fuel pump with Bosch external pump -6an line
Evo 8 injectors
ARP head studs
4 layer mitsubishi head gasket
Clutch Master 2100 / 6 puck clutch net disc
Apex AFC
HKS Turbo Timer
Greddy EGT with memory and warning light autometer fuel press and boost gauges
5 lug conversion
Eclipse GSX 94 2 pots front calipers and discs
Rear sway bar
KYB GR2 shocks
2003 eclipse rims
JDM front conversion
Numers 347hp/363tq 11.3 a/f 18 psi




RedTwo
(Rangi Kiwi)
06/14/09 07:43 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

Wow, those are good numbers from a single cam!

FCR
(Beware Car stops suddenly for parts by the road)
08/16/09 05:09 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

Having some fun................







Terrance362
(needs moar imput)
08/16/09 05:36 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

So nice. I love you 7th gen galant I have those same fog lights I just could never get that front bumper..And I love the rear defuser on the 6th gen

bazeng
(work in progress)
08/16/09 05:46 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

How does it perform on the track against all the newer cars?

Video's would be awesome!


FCR
(Beware Car stops suddenly for parts by the road)
08/16/09 07:14 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

The car perform really great against all the newer cars subis, porshe and some vettes, as it was my first time in my car at this track, the expirience was really great. The car ran like a champ, my GT30R works great,power strong and full spool around 3400 to 3600 RPM and track temps were perfect. Without a ABS is relatively scary @ this track for a first timer, but once the tires were up to temp and pressure the car was very predictable, edgy but predictable. I finish with the third best lap time overall. As far as my future plans for the car i'm coming lower,lighter, wider and of course MORE POWER. I love drive my car...

FCR
(Beware Car stops suddenly for parts by the road)
08/16/09 10:11 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

Video having some fun in attack mode........
click


2of9
(Hellaflush)
08/16/09 10:31 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

awesome video and I'm reallllly diggin that JDM rear with the diffuser.

RedTwo
(Rangi Kiwi)
08/17/09 07:52 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

Is it rolling heavily in the corners or does that one photo just make it appear that way?

FCR
(Beware Car stops suddenly for parts by the road)
08/17/09 07:58 PM
Re: FCR Grandpa 1352/2000 --UPDATES--

A little bit of both, but now i'm working in the suspension setup doing some upgrades(coilovers,swaybars,endlinks,etc)


Contact Us | Privacy statement GalantVR-4.org

Generated in 0.006 seconds in which 0.002 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page