V8Bait
(Newbie)
07/28/18 06:10 PM
FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

** Update ** 4/4/2019 -- I am moving to aggressively sell #3. Please contact me with an offer if you are at all interested in this car, the worst I can say is no.

*************************************************************************************

I can be reached via PM's here or by email at [email protected] -- I will be an active seller

For Sale is #3. The car is at 84,500 original miles and has been mostly garaged since I purchased it. I purchased the car through "boostedinaz" about 3 years ago and had it brought to Lexington, KY.
Since I have purchased this car I have loved the car. I thought when I purchased the car it would bring back everything I had forgotten about these cars immediately but have been shocked how much I've had to relearn. I do work out of town year round and don't have the time to spend on the car. The car is started and driven every 3 weeks like clock work by my brother and maintenance has been maintained as well.

Not much has changed in the car since I bought it. Here is the original post from when I bought the car 3 years ago. click For some reason I can't get the new pictures to upload but I do have available. One thing that has changed is I have installed a new stereo and gotten the sound system wired correctly. I have not had the car dynoed but when it was in AZ it was dynoed at 451 AWHP on E85.


Performance & Driveline modifications:
-----------------------------
* HKS 272/272 intake and exhaust camshafts
* Forrester ported head with over sized valves, titanium retainers, springs, etc.
* AMS built and O-ringed bottom end including JE, Ross, and ARP products
* Moroso aluminum oil pan
* DSM Link V3 lite with DS conversion
* 4 bolt rear end with LSD
* Extrude Honed USDM spec intake manifold
* ThreeSpeed Stainless Steel Scatter Shield (SSSS)
* ACT 2600 clutch
* ACT flywheel
* Shep Stage 2 trans
* K&N air filter from a Mustang filter charger kit.
* Stainless steel clutch line
* Paxton fuel pressure regulator, filters, and pump with custom bracketing.
* FIC 1150 injectors
* -10 and -8 Braided fuel lines, modified fuel rail, and an hand made aluminum fuel cell.
* ThreeSpeed 3" aluminum lower and stainless upper intercooler pipes and hand formed aluminum sheet metal curved end tanks using a Spearco 2-197 bar and plate intercooler core.
* AGP T3/T4 Garrett turbo (60-1)
* Cast iron T3 exhaust manifold
* 35 mm Tial external wastegate
* ThreeSpeed 3" o2 eliminator
* 3" press bent steel exhaust with Magna flow muffler
* HKS SSBOV
* HKS EVC EZ
* Aluminum radiator and Spal 1400 CFM cooling fan
* EBC Red brake pads, cad plated slotted rotors, SS brake lines
* 90 DSM spec external air oil cooler
* Short shift using 3000gt parts and the MACH V Symborski shifter bushing kit.

Suspension/handling modifications, Exterior/Interior modifications:
----------------------------------------
* Tein HA Coilovers and pillow ball mounts
* Greddy front and ThreeSpeed rear strut tower bars
* Volk Racing CE28N 17 x 8.5 wheels
* Whiteline sway bars and bushing through out.
* Optima battery mounted in trunk in custom floor enclosure
* 6 point NHRA cage with swing-outs
* RCI 5 point harnesses (OEM seat recovered for crotch slot)
* AWS and ABS removed
* Momo steering wheel
* Shaved fuel door and emblems
* JDM clear corner lights
* Autometer Carbon fiber Oil pressure, and boost gauge. AEM wideband
* Stereo consists of Sony and Soundstream. (Never on)
* Leather carbon fiber tooled trunk linings
* Polished vanity spark plug cover (3of1000) with MACHV.com stainless hardware
* Custom floor mats
* Custom paint
* Window tint


V8Bait
(Newbie)
07/28/18 06:15 PM
Re: FS: #3/1000 Lexington, KY 16K OBO

Now it works














Turbo4door1
(Paid to pewp)
07/30/18 07:03 AM
Re: FS: #3/1000 Lexington, KY 16K OBO

The infamous Number 3 pops up again! If I had more garage space, we would probably be talking. Good luck with the sale, it's a beautiful car.

boostedinaz
(Fatty McButterpants)
08/01/18 08:55 PM
Re: FS: #3/1000 Lexington, KY 16K OBO

If any one has questions or concerns about the car I would be glad to answer them. When I sold the car Chad was very up front and super easy to deal with. No BS just a quick easy sale.

getboosted
(Member)
08/02/18 04:24 PM
Re: FS: #3/1000 Lexington, KY 16K OBO

Is A/C still functioning as I can see the A/C lines are still there. Thanks.

V8Bait
(Newbie)
04/04/19 06:48 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

bump

pot
(It's a twee shaker----choot him choot him)
04/04/19 08:21 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

The owner needs to up the sales price to $25,000.00 and or take it off the market and revisit selling number 3 fiver years from now. That's all I have to say.

Primo
(Newbie)
06/13/19 05:35 AM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

If this is still for sale, please PM Me, Thank you

AWDnot2
(Senior Member)
10/09/19 12:36 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

Interested in a trade for a 1993 Mirage River Racer w/ a Mercury 260 EFI?








gvr4ever
(Forever Member)
02/17/20 01:57 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

It's a good thing I don't have one of those large steel buildings garages...

I'd think you could get more on bring a trailer. You could work with them and see if they will let you have a reserve.

Kinda surprised this hasn't sold yet. It's deferentially priced on the low end. I wouldn't let mine go for a penny under 8K, but that's just what it's worth to me.


Amanthius
(Newbie)
02/27/20 12:29 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

Hello,

I had a quick question about your awesome build on car #3. Did the TEIN HA coilovers need to be modified to work? I am looking to get coil overs for my Galant but can't seem to find may options aside from BC, and some other brands. Thanks in advance.

-Aman


turbowop
(Hard Snarker)
02/28/20 07:07 PM
Re: FS: #3/1000 Lexington, KY 14K OBO ***Price Reduced***

Quote:

Hello,

I had a quick question about your awesome build on car #3. Did the TEIN HA coilovers need to be modified to work? I am looking to get coil overs for my Galant but can't seem to find may options aside from BC, and some other brands. Thanks in advance.

-Aman




I am the one that supplied Harry (the owner that did the majority of the work to #3) with the Tein HAs. They were a straight bolt-on coilover for these cars, but I'm afraid that they are NLA at this point. They were installed way back around 2003.



Contact Us | Privacy statement GalantVR-4.org

Generated in 0.003 seconds in which 0.002 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page