**DONOTDELETE**
(Unregistered)
05/17/11 01:14 PM
FS: Pile of GVR4 Parts!

UPDATE 5-2-12. I still have this stuff, as well as the wing (nile black), one of the front dog legs (left I think?) I think I have a 1g shifter, a coil pack.
I want it all out of my garage. All prices are negotiable. If someone wanted to come pick it all up I'd make you a package deal!


Complete ignition lock and key set $50 + shipping
all in perfect condition, the key is not OE, but is not a copy of a used key. Its very crisp and sharp.


Non sunroof GVR4 visors $20 + shipping





HVAC (Heater and A/C) bezel -20?



Defrost switch + blank, no broken tabs $20 shipped
Sunroof switch + dimmer, a couple of broken tabs $25 shipped




Cup Holder $10 + shipping


BSE crank shaft spacer $9 shipped


IAC $20


ECO/PWR Switch $12 shipped


Deck harness + OE galant wiring, to repair a hacked deck install. $10 shipped


NT TB $20


2g O2 $20 + shipping


2g Exh Manifold $30 + shipping





CAS $30


4.5" air filter and 2g/3g/Evo MAF adapter $45 shipped



**DONOTDELETE**
(Unregistered)
05/17/11 02:26 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

i need the harness under the hood, the guage trim bezel, heater control knobs all shipped to 24171 virginia

mikus
(weiterhin das Huhn f#$k)
05/17/11 05:26 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

PM sent

GSX_TC
(295hp 35r BR4)
05/17/11 06:01 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

How much for the center a/c vents and 1a/c knob and the rear speaker covers near the back window Shipped to 92126

maroonmetallic
(VR4sRus at the old school frosty stop)
05/17/11 07:24 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

price & condition of drivers rear dogleg (condition & price of fuel door)?
Shipping to 54956.

Thanks!
-Shawn


**DONOTDELETE**
(Unregistered)
05/17/11 08:21 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Wow. Alot to keep up with. It's pouring ass rain here. Tomorrow is supposed to be sunny, I'll get stuff pulled and weighed etc and get everyone prices by tomorrow evening

oldman_tau
(Member)
05/17/11 08:37 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

you got pm for the sideskirt and passenger dog leg

makedollarz
(Member +)
05/17/11 08:59 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Can I please purchase the entire trunk interior. would like all the side carpet/plastic pieces, carpet, pieces that cover the taillights and that covers the backseats if possible.

Thanks


maroonmetallic
(VR4sRus at the old school frosty stop)
05/17/11 09:25 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Quoting oldman_tau:

you got pm for the sideskirt and passenger dog leg
Quoting Speed Racer:

The Bad:
*Missing .... RR dogleg .....







If you read the for sale ad, it stated no RR dogleg.


talontyme
(Member +)
05/17/11 09:54 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I would like to grab the fog switch,dash cluster,the coin holder/mirror switch,and the lock set(all).

**DONOTDELETE**
(Unregistered)
05/17/11 10:40 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

i almost forgot. also with my list, i need the enitre fuel pump assembly out of the tank with the heat knobs, under hood harness and other stuff i mentioned in my earlier post. thanks

15psi88
(Member)
05/17/11 11:29 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Dibbs on tail lights.

**DONOTDELETE**
(Unregistered)
05/19/11 10:15 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

still waiting on price for heater knobs, radio brackets, fuel pump assembly, under dash plastic on driver side, under hood harnness, and guges bezel.also, if you have the radio mount brackets would be nice thanks a bunch

i see on your list, someone wants the cas plug in. if it matters, and i can get the harness from you uncut, then i will locate and send you a cas plug for the other gentleman.


GSX_TC
(295hp 35r BR4)
05/19/11 10:52 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I need the foglight/dimmer switch and 1 a/c knob if they still for sell. How much shipped to 92126

**DONOTDELETE**
(Unregistered)
05/20/11 03:04 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Quoting vr4er:

still waiting on price for heater knobs, radio brackets, fuel pump assembly, under dash plastic on driver side, under hood harnness, and guges bezel.also, if you have the radio mount brackets would be nice thanks a bunch

i see on your list, someone wants the cas plug in. if it matters, and i can get the harness from you uncut, then i will locate and send you a cas plug for the other gentleman.



Sorry I haven't gotten prices yet. I don't have the radio brackets. Someone else wanted them, and I KNOW I had some somewhere, but I can't find them. I'll make you a good price on stuff, I have had an overwhelming amount of interest, and I have been busy. I didn't get much done today because I had a lead on some of the parts from my truck I had to go check out. -My truck got stolen and stripped last week, and since the police aren't investigating its up to me. In addition to work and school, I get to put my truck back together and part out the poor galant. So I appreciate everyone's patience, I'll get everything pulled and shipped as timely as possible. I will try to price everything as fair as possible.
Couple questions:
#1 Heater knobs. I can't get them off. I may have to take pliers and a rag to pull the knobs. They just wont budge, and I have an iron grip! I don't want to break shit.
#2 Under hood harness. How far back under the dash does it go before I can umplug stuff, or am I going to have to hack it off at some point?
#3 yes I do want to send the CAS plug to the other person, or you can if I send you the harness. I have to look at it. The harness is perfect except the injector plugs, and I thing the TPS plug might be partially broken, but I have a couple of those, the pins could be pushed out and swap the plastic.
Thanks


GSX_TC
(295hp 35r BR4)
05/20/11 03:14 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Since you got everything taken apart, Can I also get the door lock relay under the dash there. I believe the the middle one with 7 prongs

**DONOTDELETE**
(Unregistered)
05/20/11 03:37 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Quoting vr4er:

i almost forgot. also with my list, i need the enitre fuel pump assembly out of the tank with the heat knobs, under hood harness and other stuff i mentioned in my earlier post. thanks




Thought fs had to have prices or am missing something here anyways,I am interested in
the fuel tank if its in good condition and the studs are not broken any pics? I will also take
the 1g shifter and boot if its still available and the right rear dogleg? Prices shipped 06514 Thanks.....
D.....


**DONOTDELETE**
(Unregistered)
05/20/11 07:20 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

on my 91, there is a plug in just before the fuse box under the hood, towars the cabin of the car. i think that is where the cabin harness plugs into the under hood harness. SOMEONE CORRECT ME IF I AM WRONG. but if i am wrong, ill take the entire harness, as much as you will disconnect.lol

Brianawd
(Higher Launch RPM)
05/20/11 10:18 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

how much for the cup holder and center console arm rest?

asmo
(Junior Member)
05/21/11 12:06 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Do you still have the skirting/door moulding for passenger side rear door?
PM me price plus Shipping to 84084


**DONOTDELETE**
(Unregistered)
05/22/11 07:58 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I got alot pulled today. I am trying to figure out good prices for everything.
$10 +shipping for the cup holder
$40+ shipping for fuel tank -without pump assembly
$25+ shipping for pump assembly
I will get the tank out and get some pics.
Thanks


maroonmetallic
(VR4sRus at the old school frosty stop)
05/22/11 11:30 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Quoting maroonmetallic:

price & condition of drivers rear dogleg (condition & price of fuel door)?
Shipping to 54956.

Thanks!
-Shawn





Any word on this?


belize1334
(well bread and nobly conceived)
05/22/11 01:50 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I'd really like the plastic grommet and clip for the hood prop. I'll make it worth while!

**DONOTDELETE**
(Unregistered)
05/23/11 12:22 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Sorry to say the grommet wasn't there and the clip is already spoken for.
I got some more pulled today, and boxed up and some shipping quotes done. I am getting everything pulled and priced and delivered as quickly as my schedule allows. Again I appreciate everyone's patience. I will try to update the spreadsheet to help me keep track of stuff. If you are on the spreadsheet and I have missed something please let me know.
Thanks


talontyme
(Member +)
05/23/11 03:42 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Quoting belize1334:

I'd really like the plastic grommet and clip for the hood prop. I'll make it worth while!




the rubber grommet can still be had new from jnz tuning i just bought 2 less than a month ago they were a buck or two(sorry for the jack)


OMFGeofffff
(All I want is a dodgy)
05/23/11 03:48 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Interested in the fuel sending unit after seeing pics.

**DONOTDELETE**
(Unregistered)
05/23/11 04:25 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

thats fine speed racer, ill still take what ever you can get off for me.,

**DONOTDELETE**
(Unregistered)
05/27/11 01:01 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

An update for everyone waiting for parts and shipping quotes. Its been pouring ass rain here for the last couple days, I have a bunch of stuff pulled that I'm going to pack and weigh today, but I'm not going to pull stuff until the rain quits. Sunday is supposed to be sunny.

**DONOTDELETE**
(Unregistered)
05/27/11 08:16 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

rear calipers (with parking brake cable clips) and parking brake cables.

**DONOTDELETE**
(Unregistered)
06/21/11 03:36 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I'm back from vacation, and am now in summer term, taking ALOT less classes and have alot more free time. So I'm getting this thing stripped down and hauled off to the crusher, unless someone wants the stripped shell. I still have lots of parts and am going to have the free time to pull stuff quicker. If there is anything you need shoot me a PM.
Thanks


quicktsi
(Member)
06/22/11 07:45 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

If this has not been paid for I want it.

click


maxash0775
(Member)
06/23/11 01:56 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Hello. Do you have stock antenna. Also, what is the ECO boost. I didnt get that?

deedo
(Junior Member)
06/24/11 01:59 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Does the car have auto on manual belts? If its auto I need the passenger side a pillar cover

Hondakiller
(Member)
06/24/11 06:34 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Do you have the stock vr4 shift boot?

**DONOTDELETE**
(Unregistered)
06/24/11 07:10 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I do have the antenna, and the stock shift boot, I'll send you guys PMs, the ECO button is from the automatic cars, there is a whole thread in the how-to section for making scramble boost, and such with them. Its just a realllly sleeper switch useful for that kind of stuff.
It had auto belts, but I do have alot of the manual belt swap parts. The passenger A-pillar is broken at the top though.


**DONOTDELETE**
(Unregistered)
06/29/11 02:43 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Hi, PM sent.

4wheelsqueal
(Member +)
06/29/11 07:41 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

pm sent

tarmacvr4
(Junior Member)
06/29/11 09:01 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Do you have the trim piece that goes above the front and rear doors next to the headliner and runs from front to rear in gray?

**DONOTDELETE**
(Unregistered)
06/29/11 10:16 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I want the Eco button if you still have it.pm me if you do and I will send paypal payment asap.

**DONOTDELETE**
(Unregistered)
06/29/11 06:57 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

do you still have the engine harness for sale and how much do you want for it.

**DONOTDELETE**
(Unregistered)
06/29/11 09:18 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I do have the engine harness still. I have to pull the chassis harness too. I don't really know how much to ask for the engine harness. its not hacked except the injector clips and I think the TPS, or maybe it was the CAS plug, but I have all the plugs to replace them. I guess make an offer?

dsm10o0
(Member ++)
06/30/11 12:10 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

do you still have the radiator fan harness? lmk thanks

**DONOTDELETE**
(Unregistered)
07/04/11 08:27 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I do have the radiator fan harness, I'm not sure if it is seperate from the engine harness. I need to get it all pulled.

dsm10o0
(Member ++)
07/04/11 09:33 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

How much do you want for it? i just need the wirings with the connectors.

KiNgMaRtY
(Member +++)
07/05/11 07:01 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I need the clip that holds the sunvisor when you clip it in. Also need the driverside dash speaker cover if all clips are still intact
PM me if you have it.


**DONOTDELETE**
(Unregistered)
07/24/11 09:51 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Pulled the rear brake hardlines today. I haven't spent this much time under her since I bought her a year ago. It has NO rust at all. The rack and rear PS lines are in great shape, no leaks. Anyone need these? I'm trying to get it stripped down in the next week or two and get it out of my driveway. Its starting to look stripped, and looks like #ss in front of my house. So this is getting to be "LAST CALL" for parts.

4wheelsqueal
(Member +)
07/24/11 10:05 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

How much for the rear p/s lines? Can alway use a spare set

**DONOTDELETE**
(Unregistered)
07/25/11 03:36 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I don't really know what the going rate is for them. $75 +shipping sound fair?

Galantvr4559
(Member +)
07/26/11 06:09 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I need the rear window molding. Both sides.and the top do u still have it and how much.shipped

**DONOTDELETE**
(Unregistered)
07/26/11 09:02 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

the outside correct? Those are always a PITA to pull without bending. I don't know how much shipping would be but I'd say like $40+ shipping I guess. Sound fair?

twonineseven
(Weird)
07/26/11 10:14 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

how much for the hvac blower motor and drivers side mirror.

dsm10o0
(Member ++)
07/27/11 02:10 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Anyword on the radiator fan wiring harness? I just need the wire from the fan, resistor and coolant fan switch. It can be unplugged on the side of the radiator.


lemme know

thanks


Ghettoize
(Junior Member)
07/27/11 08:50 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Front suspension? are the shocks still good pm me price

**DONOTDELETE**
(Unregistered)
08/07/11 04:31 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

front suspension is all there, don't know what kind of shape the shocks are in, it only had 135k, I don't really want to pull the suspension out of it, it will make it alot harder to haul off. Plus that stuff is going to be expensive to ship

GSX_TC
(295hp 35r BR4)
08/07/11 05:34 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Do u still have the 91 ECU?

**DONOTDELETE**
(Unregistered)
08/09/11 10:38 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Nope ECU is long gone. I DO have the wing, passenger rear dogleg, and lots of misc. School's out this week, hopefully I can dedicate next week to stripping it down, getting the harness out and scrapping it. So its getting to be last call here. I'm moving in September and this isn't coming with me.

GSX_TC
(295hp 35r BR4)
08/09/11 08:11 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

ok then, thanks anyways

Wizardawd
(Senior Member)
08/10/11 03:56 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I need the dogleg.....pm me a price.

Wiz


MuffinMan7580
(Member)
08/10/11 05:51 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I need the trim piece that covers the ECU if you've got it still.

**DONOTDELETE**
(Unregistered)
09/08/11 10:16 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

BUMP! I just hauled it off for scrap. Lets get rid of these last few GVR4 parts! I'm DONE!

maroonmetallic
(VR4sRus at the old school frosty stop)
09/09/11 07:46 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Probably didnt cut the lower radiator supports off of it, huh?

-Shawn


Galactica
(Member)
09/09/11 10:27 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Hard to find if you've already sold it, but I'd like the armrest cupholder if you still have it.

**DONOTDELETE**
(Unregistered)
09/09/11 02:08 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Are the front and rear bumpers gone? I also need the piece of weather stripping for the rear windshield on the drivers side. PM me please.

**DONOTDELETE**
(Unregistered)
09/09/11 05:38 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

do still have the cupholder. it's in the box 'o vr4 stuff in my garage. I'll get back to you when I get to a computer.

GSNT
(Deer Slayer)
10/23/11 11:30 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

Still have the visors?

**DONOTDELETE**
(Unregistered)
11/24/11 03:28 PM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

I do. I may be able to fit them in a medium flat-rate box. So I'd guess $35 shipped?

**DONOTDELETE**
(Unregistered)
05/03/12 04:24 AM
Re: FS: Parting Nile Black 91 GVR4 In Oregon

One more BUMP to help clean out my garage!


Contact Us | Privacy statement GalantVR-4.org

Generated in 0.004 seconds in which 0.001 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page