tinkolby_25
(Junior Member)
10/01/10 09:41 PM
Harness Bar! ONLY ONE LEFT AT $165 plus shipping - plus paypal fees

I have harnesses in my car and I would like to have access to my backseat. So I was wondering if anyone on here had a harness bar, and if so which is the best. Post pics up if you have one.

Thanks,
Justin


steveGalant VR4.org Administrator
(Key Fob Guy)
10/01/10 09:42 PM
Re: Harness Bar!

Shouldn't you post a WTB thread?

tinkolby_25
(Junior Member)
10/01/10 09:47 PM
Re: Harness Bar!

No this is an opinion thread I wanted to see different options I have for them and wanted to see some setups.

Brunoboy
(Jesus Clips)
10/02/10 01:05 AM
Re: Harness Bar!

I asked this when i first joined the board, someone here makes one.
-shane


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/02/10 03:32 AM
Re: Harness Bar!

^ you mean used to make one?

Galantvr41062
(Epic Build)
10/02/10 04:15 AM
Re: Harness Bar!

I could make one, just tell me where you want it to bolt onto.

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/02/10 04:22 AM
Re: Harness Bar!

can you make the same one that 3speed use to make?

Galantvr41062
(Epic Build)
10/02/10 04:31 AM
Re: Harness Bar!

I can bend 1 3/4" or 1 5/8" chrome moly or mild steel, these would be fully TIG welded with a fixture, let me know what you guys want. PM for details.

~John


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/02/10 04:53 AM
Re: Harness Bar!

click

click

this was the harness bar the 3 speed use to make.... so basically the same thing.... ill try to find out the specs on it.... but the picture shows you where its best for it to be mounted


Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/02/10 03:07 PM
Re: Harness Bar!

Quoting GalantVR41062:

I can bend 1 3/4" or 1 5/8" chrome moly or mild steel, these would be fully TIG welded with a fixture, let me know what you guys want. PM for details.

~John






please tell me your serious..

ive sent emails to AMS because i knew the used to make one, or have made a few. it was on there site a while ago but you couldnt purchase it.


i have been looking for so long for one. please


dustyduff
(Member +)
10/02/10 03:49 PM
Re: Harness Bar!

I'm interested in this too and would likely be in on something like this if someone decides to fabricate them .

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/02/10 04:23 PM
Re: Harness Bar!

yea if he can make it then thats great... we can probly run a group buy on it....

Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/02/10 04:33 PM
Re: Harness Bar!

GB or not. I'm going to pm him for just my own

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/02/10 04:45 PM
Re: Harness Bar!

^ LOL!!! hey i want one too hahaha....

Boostdtalon
(Member +++)
10/02/10 04:59 PM
Re: Harness Bar!

well at least let us know what he says. I know there are a couple of us that want one.

ApexHunter
(Extreme Indoor Cyclist)
10/02/10 06:52 PM
Re: Harness Bar!

I've been waiting for one to pop up in the FS section, but this could turn out better.

tinkolby_25
(Junior Member)
10/02/10 09:29 PM
Re: Harness Bar!

Well damn I guess I just made a few peoples days. Lol

Brunoboy
(Jesus Clips)
10/02/10 09:58 PM
Re: Harness Bar!

Im in

Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/03/10 11:39 AM
Re: Harness Bar!

Tink guys here longer then me still want these and couldn't get them. I've been loookin for a while. Still waiting for his reply back.

NickDromez
(Member)
10/03/10 01:13 PM
Re: Harness Bar!

i want a harness bar! group buy please

Ralli380Gvr4
(Bearded Snow Leopard)
10/03/10 03:00 PM
Re: Harness Bar!

I'm in for one.

Brunoboy
(Jesus Clips)
10/05/10 06:27 PM
Re: Harness Bar!

So whats up then? GB? Bump bump

Boostdtalon
(Member +++)
10/05/10 09:05 PM
Re: Harness Bar!

I wonder if an Evo 8-9 harness bar would fit?

Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/05/10 09:25 PM
Re: Harness Bar!

I never heard anything back from him...


^^ I asked if a E8 bar would work before one time, no one ever answered. I'm sure it should but really its just measuring pillar to pillar.


Brunoboy
(Jesus Clips)
10/05/10 09:29 PM
Re: Harness Bar!

True if you measure the distance from side to side . Some bars are universal.
-shane


Boostdtalon
(Member +++)
10/05/10 10:07 PM
Re: Harness Bar!

Yeah I asked a buddy to take measurements on his Evo 8 since he has a harness bar. I'll put up the info when I hear back from him.

Galantvr41062
(Epic Build)
10/07/10 01:04 AM
Re: Harness Bar!

I will try to have a prototype of a harness bar using 1 3/4" od .083 chrome moly by this weekend. I will post pics and PM a est price to those who would want one.

~John


Brunoboy
(Jesus Clips)
10/07/10 01:20 AM
Re: Harness Bar!

yes please, pics would be nice installed as well.
-Shane


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/07/10 01:21 AM
Re: Harness Bar!

Quoting GalantVR41062:

I will try to have a prototype of a harness bar using 1 3/4" od .083 chrome moly by this weekend. I will post pics and PM a est price to those who would want one.

~John




cool.... let us know


Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/08/10 02:18 PM
Re: Harness Bar!

Quoting GalantVR41062:

I could make one, just tell me where you want it to bolt onto.





Prototype should be done by the weekend.... as GalantVR41062 has pm*d me.


grocery_getter
(Senior Crab)
10/08/10 02:22 PM
Re: Harness Bar!

I actually have a 3 speed harness bar sitting here. I was going to use it to make more duplicates, as I've cleared this with Harry. However judging by how cheap everyone on this list is these days, and the cost of material and hourly labor to make these bars and shipping and the consequence of having 90% of the 'I want one!' crowd backing out AFTER the bar is made and AFTER the labor is expensed, I had to sit on that idea.

dustyduff
(Member +)
10/08/10 06:53 PM
Re: Harness Bar!

I'd still be interested in one if somebody decides to fabricate one. If it was just like the threespeed one. Understandably, most people probably back out, but I'm serious. If you decide to get rid of the one you have grocery_getter, let me know via pm.

number3
(Senior Member)
10/09/10 01:07 PM
Re: Harness Bar!

The jig we made up for the harness bar was accidently scrapped years ago.

If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.


JSchleim18
(Minor 69er)
10/09/10 01:45 PM
Re: Harness Bar!

IN!

And I'm gonna see if a friend of mine can send you the bar


Brunoboy
(Jesus Clips)
10/09/10 01:49 PM
Re: Harness Bar!

Quoting number3:

The jig we made up for the harness bar was accidently scrapped years ago.

If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.




I knew someone had made em, aha


number3
(Senior Member)
10/09/10 02:18 PM
Re: Harness Bar!

Harness Bar photos

Brunoboy
(Jesus Clips)
10/09/10 02:37 PM
Re: Harness Bar!

Correct me if im wrong, but isnt a harness bar supposed to be higher than that? I mean harness are supposed to be at 45 degrees?

JSchleim18
(Minor 69er)
10/09/10 03:28 PM
Re: Harness Bar!

Spoke to my buddy. He can drop it off to Harry next week if that's ok with Harry.

Please anyone with interest reply in this thread because he doesn't want to take it off unless there's interest and no flakers!


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/09/10 04:38 PM
Re: Harness Bar!

hey harry how much you think this would cost? if its around 250 then im in....

turbowop
(Hard Snarker)
10/09/10 05:21 PM
Re: Harness Bar!

Quoting brunoboy:

Correct me if im wrong, but isnt a harness bar supposed to be higher than that? I mean harness are supposed to be at 45 degrees?




The pics way up in the first couple posts are of my car. The harnesses are pretty much level with my shoulders. I think the bar is spot-on as far as placement.


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/09/10 06:19 PM
Re: Harness Bar!

yea it shouldnt be that bad specially if you have aftermarket seats that has the slots for the harness....

dustyduff
(Member +)
10/09/10 06:44 PM
Re: Harness Bar!

Quoting JSchleim18:

Please anyone with interest reply in this thread because he doesn't want to take it off unless there's interest and no flakers!




Definitely still in for this!!


AWDnoobie
(Member)
10/09/10 07:26 PM
Re: Harness Bar!

Damn thats a nice looking bar

Brunoboy
(Jesus Clips)
10/09/10 08:33 PM
Re: Harness Bar!

Im in, are they going to be polished or black?

NickDromez
(Member)
10/09/10 09:34 PM
Re: Harness Bar!

im in on these harnesses too. i hope this follows* through

edit* changed to follow since my grammer is bad


turbowop
(Hard Snarker)
10/09/10 10:28 PM
Re: Harness Bar!

You mean "follows" through?

tinkolby_25
(Junior Member)
10/09/10 11:35 PM
Re: Harness Bar!

I started the thread so I'm def in on it. I want to be able to put people in my backseat.

spooling92vr4
(Yeah Toast! * Now with JELLY!!!)
10/10/10 06:34 AM
Re: Harness Bar!

I'm willing.g to remove mine and get it to harry. But I want to make sure the people want this and I'm not pulling my car apart for no reason

steveGalant VR4.org Administrator
(Key Fob Guy)
10/10/10 01:28 PM
Re: Harness Bar!

Quoting NickDromez:

im in on these harnesses too. i hope this falls through





Brunoboy
(Jesus Clips)
10/10/10 02:45 PM
Re: Harness Bar!

like i said, definitely in, what do you guys think price will be? just so i know how much I need to get together.
-Shane


SmoothCustomer
(Public school educated knowitall)
10/10/10 03:07 PM
Re: Harness Bar!

I might be interested depending on price just so I can have one if I ever need it.

number3
(Senior Member)
10/10/10 06:51 PM
Re: Harness Bar!

Once i have bar to rejig i will cost out materials and get a price. I will make them either way. Some one will buy them. I can't remember what i sold them for originally but steel is a lot more expensive.

The original bars were also professional painted in a paint booth with high quality automotive paint and that added to the cost. So unless people really wanted them painted again i will sell them raw.


dustyduff
(Member +)
10/10/10 10:25 PM
Re: Harness Bar!

Harry, I can't speak for everyone else, but I would prefer mine raw. I planned on having it powdercoated whenever I get it.

Brunoboy
(Jesus Clips)
10/10/10 10:38 PM
Re: Harness Bar!

Yea well, just let us know on price, and i can get it painted myself, thanks, back then when i asked about these i was told $250 for the bar shipped. But that was a year or so ago.
-shane


Galantvr41062
(Epic Build)
10/11/10 12:29 AM
Re: Harness Bar!

My roll cage is in the way of making a harness bar. So for now I am going to pass on trying to make a harness bar.

brisvr4
(Oceania Distict Enforcer for the Galant VR4 Mafia)
10/11/10 12:42 AM
Re: Harness Bar!

I hate to be a downer guys but without a roll bar to protect your head what is going to happen in a rollover situation with one of these installed?
Aren't the harnesses going to hold you upright in your seat allowing the roof to possibly crush your neck and spine?
It's a very unlikely situation but one that could happen all the same.
God forbid that anyone here has an accident that bad of course!


turbowop
(Hard Snarker)
10/11/10 01:48 AM
Re: Harness Bar!

That's always been the issue with harness bars, or using harnesses in general that don't have an inertia reel.

It's a risk you take, although I don't think it's a huge one. We've even seen pics on this site of gvr4's in nasty rollover accidents with the roof still totally intact. It's been a few years since the pics of that ricey pile of shit surfaced though. That said, I should probably go knock on some wood now.


Brunoboy
(Jesus Clips)
10/11/10 02:03 AM
Re: Harness Bar!

Wait so these are or are not being made? ^^^

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/11/10 02:17 AM
Re: Harness Bar!

dude read the thread.... someone is going to send one to harry so harry can make the jig for it....

Brunoboy
(Jesus Clips)
10/11/10 03:16 AM
Re: Harness Bar!

Im reading, just not sure what peoples real names are, then reading on someone who is gunna do it then someone said they aint got time for it. So yea confusion....

JSchleim18
(Minor 69er)
10/11/10 08:04 AM
Re: Harness Bar!

Harry is number3 on this board...owner of Threespeed who makes the scatter shields as well.

This is still going on and more than likely going to get made


Brunoboy
(Jesus Clips)
10/11/10 10:54 AM
Re: Harness Bar!

Thanks for the clarification

number3
(Senior Member)
10/11/10 11:37 AM
Re: Harness Bar!

I used Sam Sayes car years ago to make the jig. I couldn't use mine due to it having a roll cage that got in the way for test fittings. I used the jig to make another jig years ago so I can't replicated them until I get one of the bars I made back. This sounds like this is going to happen.

I also got a lot of crap about the saftey of harness bars years ago. The same could be said about roll cages and no helment. Roll cages are better and safer while wearing a helmet (DUH) but people are big boys and girls and can make the choice on their own what they want to do. Use either safety device at your own risk.

That being said once we have the 'style' harness bar in hand I will start the production back into swing. Pricing will follow once the materials and labor are reevaluated. I doubt I will have them painted from now on. Each person can chose the finish they want once they get it home.


Ralli380Gvr4
(Bearded Snow Leopard)
10/13/10 05:05 PM
Re: Harness Bar!



spooling92vr4
(Yeah Toast! * Now with JELLY!!!)
10/14/10 07:14 PM
Re: Harness Bar!

JUST GOT HOME! drove 3 hours to harrys and 4.5 back to drop my bar off.. of course got caught in a monsoon on the way home.

Brunoboy
(Jesus Clips)
10/14/10 08:15 PM
Re: Harness Bar!

+1 ^ Good man

JSchleim18
(Minor 69er)
10/14/10 09:51 PM
Re: Harness Bar!

Quoting spooling92vr4:

JUST GOT HOME! drove 3 hours to harrys and 4.5 back to drop my bar off.. of course got caught in a monsoon on the way home.




Thank you so much Chris! It is definitely bad out there.


number3
(Senior Member)
10/15/10 05:37 PM
Re: Harness Bar!

Thank you Chris.

dustyduff
(Member +)
10/15/10 07:45 PM
Re: Harness Bar!

Thanks for coming through with this spooling92vr4. Definitely appreciate you going out of your way to help all of us who are looking for the bar.

spooling92vr4
(Yeah Toast! * Now with JELLY!!!)
10/15/10 08:04 PM
Re: Harness Bar!

will accept sexual favors as payment

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
10/16/10 01:16 AM
Re: Harness Bar!

^

shredder2010
(Junior Member)
10/17/10 08:03 PM
Re: Harness Bar!

Yes im also intrested in one of these to seeing that number 5 doesnt even have a drivers seast belt

Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
10/24/10 01:01 AM
Re: Harness Bar!

updates?

Brunoboy
(Jesus Clips)
10/27/10 09:17 PM
Re: Harness Bar!

update?

number3
(Senior Member)
10/28/10 06:24 AM
Re: Harness Bar!

Update?

Materials on order.


number3
(Senior Member)
11/01/10 03:26 PM
Re: Harness Bar!

Busy week or two with SEMA etc. Hang in there.

Ralli380Gvr4
(Bearded Snow Leopard)
11/10/10 11:19 PM
Re: Harness Bar!




Boostdtalon
(Member +++)
11/10/10 11:57 PM
Re: Harness Bar!

Is that an old pic or what?

Either way I can't way to place my order when Harry starts that. Just got my schroth harnesses.


Ralli380Gvr4
(Bearded Snow Leopard)
11/11/10 07:40 AM
Re: Harness Bar!

Yeah I found it looking through old pics on my computer, I think it's an old picture of Harry's car.

Just something make everyone's mouth water...


SleepinGVR4
(What are we going to do today Ferb?)
11/11/10 09:23 AM
Re: Harness Bar!

That's not 3/1000, it has a cage.

Ralli380Gvr4
(Bearded Snow Leopard)
11/13/10 04:14 PM
Re: Harness Bar!

I thought maybe he had a harness bar before he installed the cage.

number3
(Senior Member)
11/15/10 05:29 PM
Re: Harness Bar!

Very soon guys.

Diego
(Mad Hatter Suite Touche Debackle Guage filled by Justin)
11/15/10 05:57 PM
Re: Harness Bar!

Eagerly waiting..

Brunoboy
(Jesus Clips)
11/22/10 03:31 AM
Re: Harness Bar!

will this be before christmas?

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
11/22/10 01:18 PM
Re: Harness Bar!

most likely early next year since harry is pretty busy i think

Boostdtalon
(Member +++)
11/29/10 08:28 PM
Re: Harness Bar!

Harry any updates? I'll settle for a tease right now.

number3
(Senior Member)
11/29/10 11:25 PM
Re: Harness Bar!

I should have more news on Thursday. Traveling a lot more than expected.

CSMShaun
(Member)
11/30/10 02:48 AM
Re: Harness Bar!

Since you are almost starting from scratch with making these bars again I think it would be advantageous to make same changes to the design to make them more functional and safer for the people buying them.

Increasing the angle so the harness straps lay on your shoulders properly when using this bar with stock seats would be one welcome and easily made modification to the current design. Adding small bars,tabs or hoops onto the bar to hold the harness straps in place would also be a very nice addition.

I want to point out that anyone that has one of these in their car should not let someone ride in the back seat, even with a seat belt on.


**DONOTDELETE**
(Unregistered)
11/30/10 04:19 AM
Re: Harness Bar!

+1 on the strap hoops, i was thinking the same thing.

Edit: Maybe put the strap hoops under the bar?

As for passengers, is there a way to make the bar run lower so they don't crack their head open while maintaining functionality?

Edit: Bar padding isnt an option for passenger safety?


Brunoboy
(Jesus Clips)
11/30/10 10:54 AM
Re: Harness Bar!

The bar needs to be high enough for a safe angle above the shoulder or else you have a chance of breaking your spine...

CSMShaun
(Member)
11/30/10 07:43 PM
Re: Harness Bar!

Correct. Passengers just are not an option when any kind of roll cage or bracing is present in the vehicle that someone could hit themselves on in the event of an accident. Even with padding and their own harness type restraints I do not think passengers should be in the back seats of a car with a cage or harness bar.

Boostdtalon
(Member +++)
01/19/11 08:14 AM
Re: Harness Bar!

Well we're into the new year. Do we have any updates?

talontyme
(Member +)
01/19/11 05:08 PM
Re: Harness Bar!

I just stumbled onto this,I would like one also.

number3
(Senior Member)
01/21/11 05:32 PM
Re: Harness Bar!

Quoting boostdtalon:

Well we're into the new year. Do we have any updates?




The Bridgeport used to be in a different part of the shop and it was moved and the bars don't fit in the machine. We moved it (not an easy task) and we are back on track and will start pumping them out.


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
01/21/11 06:03 PM
Re: Harness Bar!

sweet... cant wait...

Boostdtalon
(Member +++)
01/21/11 08:58 PM
Re: Harness Bar!

Thank you Harry for the update! Your are the man!

CSMShaun
(Member)
01/22/11 05:58 AM
Re: Harness Bar!

Are any changes to be made to the design or it will stay the same?

number3
(Senior Member)
01/27/11 12:00 PM
Re: Harness Bar!

Final mockup on Sunday. In this mockup a thicker wall will be used to see how that works out for an even stronger bar then before.

I also modified the RX7 shield this week for more room at the slave near the firewall. (not that you guys care too much about that)


KiNgMaRtY
(Member +++)
01/27/11 12:27 PM
Re: Harness Bar!

Any way you can fab up an optional bar that will be the same but per say a 3 piece bar. So we can just unbolt the the big bar piece running through the back? Per say if we will be having people riding in the back, we can just simply unbolt it from the bracket pieces

number3
(Senior Member)
01/27/11 06:25 PM
Re: Harness Bar!

It would be easier to ship. What does everyone else think?

turboflanagan
(I would give myself something respectable.)
01/27/11 06:37 PM
Re: Harness Bar!

I think most of us that run harnesses have no other seatbelt to use so unbolting it so someone can get in the back seat is useless unless it is you getting in the backseat and not driving. I've never been too keen on backseat action and only have a harness, so I would not want it to unbolt.

I do want to carry people in the back though, so I am torn...


Boostdtalon
(Member +++)
01/27/11 07:17 PM
Re: Harness Bar!

Is there any cons to this Harry? I think its a decent idea. Im down for whatever really. I carry myself mainly and occasionally a passenger.

dustyduff
(Member +)
01/28/11 07:20 AM
Re: Harness Bar!

I'm along the lines of Turboflanagan's way of thinking. I've never been too keen on backseat action and only have a harness, so I would not want it to unbolt.

Only added advantage would be the reduced shipping costs. If we are on the topic of discussion potential changes, I think someone brought up a good one on the last page about adding small bars,tabs or hoops onto the bar to hold the harness straps in place.


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
01/28/11 08:47 AM
Re: Harness Bar!

wouldnt that be a weak point in the bar though?

Brunoboy
(Jesus Clips)
01/28/11 12:08 PM
Re: Harness Bar!

3 pc wouldnt be a bad idea just need to make sure the bolting areas are reinforced well.

number3
(Senior Member)
01/29/11 06:57 AM
Re: Harness Bar!

It wouldn't be weeker but I am sticking with a one piece for now since I know it works. It unbolts from the car in 10 mins either way. The bar sould be removed completely if anyone is going to ride in the back.

number3
(Senior Member)
01/29/11 06:58 AM
Re: Harness Bar!

click

Boostdtalon
(Member +++)
01/29/11 09:02 AM
Re: Harness Bar!

Looks awesome Harry! Thank you!

number3
(Senior Member)
01/31/11 01:13 PM
Re: Harness Bar!

I am going to offer up the first run at $165.00 plus shipping plus paypal fees.

Who wants in?


[email protected] is my paypal.



DISCLAIMER: Neither the seller nor the manufacturer guarantees these products will protect you from any sort of damage or injury to yourself, others, or any property. We make no other warranties as to the effectiveness of this product. WARNING: Racing is extremely dangerous, and injury or death may occur. Use this -- and all high-performance automotive products -- at your own risk!


number3
(Senior Member)
01/31/11 01:14 PM
Re: Harness Bar!

click

More photos here. The bars will NOT be painted.


Brunoboy
(Jesus Clips)
01/31/11 03:40 PM
Re: Harness Bar!

i want in.

Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
01/31/11 03:40 PM
Re: Harness Bar!

Im in haha how much shipped to 94080

dustyduff
(Member +)
01/31/11 03:40 PM
Re: Harness Bar!

Quoting number3:

I am going to offer up the first run at $165.00 plus shipping plus paypal fees.

Who wants in?






OOhhhh, OOhhhh, I do!!!!! Shipping to 08051 please.


KiNgMaRtY
(Member +++)
01/31/11 03:59 PM
Re: Harness Bar!

I was thinking kind of like the 3 ton jacks have the separable big handle into two. One slips into the other

**DONOTDELETE**
(Unregistered)
01/31/11 05:11 PM
Re: Harness Bar!

I want I want!!!

GreenGSX
(One Member)
01/31/11 08:09 PM
Re: Harness Bar!

I would like one please. Shipped to 14526

Boostdtalon
(Member +++)
01/31/11 08:56 PM
Re: Harness Bar!

How much shipped to 27030 Harry? Taxes should be back this week.

**DONOTDELETE**
(Unregistered)
01/31/11 09:29 PM
Re: Harness Bar!

How much shipped to 63123? Thanks

number3
(Senior Member)
02/01/11 06:37 PM
Re: Harness Bar!

Quoting GreenGSX:

I would like one please. Shipped to 14526




$208.00 total


number3
(Senior Member)
02/01/11 06:40 PM
Re: Harness Bar!

Quoting Tre3zy:

Im in haha how much shipped to 94080




Your total is $245.00

thank you very much.


Brunoboy
(Jesus Clips)
02/01/11 06:41 PM
Re: Harness Bar!

Is 208.00 shipped for everywhere in the conus? Or is it different for 94066?

number3
(Senior Member)
02/01/11 06:42 PM
Re: Harness Bar!

Quoting dustyduff:

Quoting number3:

I am going to offer up the first run at $165.00 plus shipping plus paypal fees.

Who wants in?






OOhhhh, OOhhhh, I do!!!!! Shipping to 08051 please.




Your total is $202.00


number3
(Senior Member)
02/01/11 06:44 PM
Re: Harness Bar!

Quoting boostdtalon:

How much shipped to 27030 Harry? Taxes should be back this week.




Your total is $212.00

thank you very much.


number3
(Senior Member)
02/01/11 06:48 PM
Re: Harness Bar!

Quoting brunoboy:

Is 208.00 shipped for everywhere in the conus? Or is it different for 94066?




Your total is $248.00.

thank you.


number3
(Senior Member)
02/01/11 06:49 PM
Re: Harness Bar!

Quoting steverussell:

How much shipped to 63123? Thanks




Your total is $217.00

Thank you very much.


Tre3zy
(correct me if im rite...Wyldcarz been rolling hard for a long time)
02/01/11 06:59 PM
Re: Harness Bar!

Quoting number3:

Quoting Tre3zy:

Im in haha how much shipped to 94080




Your total is $245.00

thank you very much.




cool when do you need the payment by? getting a check in 2 weeks is that ok if i pay you then harry?


JSchleim18
(Minor 69er)
02/01/11 07:05 PM
Re: Harness Bar!

BTW Harry, I had one of your harness bars shipped via Fedex and it was $40 from NY to WA as opposed to $70 via UPS.

Just a heads up


number3
(Senior Member)
02/01/11 07:23 PM
Re: Harness Bar!

If someone wants to send me a fedex call tag they can. I only have UPS stop.

**DONOTDELETE**
(Unregistered)
02/01/11 09:56 PM
Re: Harness Bar!

I want one shipped to 30809!

**DONOTDELETE**
(Unregistered)
02/01/11 10:40 PM
Re: Harness Bar!

I want 1 shipped to 99507, please?

number3
(Senior Member)
02/01/11 10:51 PM
Re: Harness Bar!

Quoting GeezVR4:

I want one shipped to 30809!




Your total is $212.00.

[email protected] is my paypal

thank you,


number3
(Senior Member)
02/01/11 10:53 PM
Re: Harness Bar!

Quoting AlaskanOwned:

I want 1 shipped to 99507, please?




Your total is $366.00

thank you very much.


Boostdtalon
(Member +++)
02/04/11 06:28 AM
Re: Harness Bar!

Payment sent Harry!

JSchleim18
(Minor 69er)
02/04/11 05:50 PM
Re: Harness Bar!

Total shipped to 11501

number3
(Senior Member)
02/04/11 08:37 PM
Re: Harness Bar!

Thanks to all those who sent payments.

number3
(Senior Member)
02/04/11 08:38 PM
Re: Harness Bar!

Quoting JSchleim18:

Total shipped to 11501




Total is $191.00. Thank you.


Ralli380Gvr4
(Bearded Snow Leopard)
02/04/11 11:28 PM
Re: Harness Bar!

shipped to 87110?

number3
(Senior Member)
02/04/11 11:47 PM
Re: Harness Bar!

Ralli380Gvr4

Your total is $232.00, thank you.


Again guys the Paypal address is [email protected]


**DONOTDELETE**
(Unregistered)
02/05/11 03:32 AM
Re: Harness Bar!

Im sorry, I'll be waiting another week or so before purchasing mine. Sorry

shredder2010
(Junior Member)
02/05/11 01:53 PM
Re: Harness Bar!

Price shipped to 53403?

number3
(Senior Member)
02/05/11 06:12 PM
Re: Harness Bar!

shredder2010
"Price shipped to 53403?"

$216.00 total

Thank you.


dustyduff
(Member +)
02/06/11 07:05 PM
Re: Harness Bar!

Quoting number3:

Quoting dustyduff:

Quoting number3:

I am going to offer up the first run at $165.00 plus shipping plus paypal fees.

Who wants in?






OOhhhh, OOhhhh, I do!!!!! Shipping to 08051 please.




Your total is $202.00




Harry, I just sent payment a few moments ago. Thanks again.


Brunoboy
(Jesus Clips)
02/06/11 10:11 PM
Re: Harness Bar!

Quoting number3:

Quoting brunoboy:

Is 208.00 shipped for everywhere in the conus? Or is it different for 94066?




Your total is $248.00.

thank you.



i will paypal tmrw or the day after Thanks, are these ready to ship out?


number3
(Senior Member)
02/07/11 06:34 PM
Re: Harness Bar!

Thanks guys keep them coming.

Boostdtalon
(Member +++)
02/07/11 09:06 PM
Re: Harness Bar!

When are these shipping. Went back over the pages and didn't see a date?

bazeng
(work in progress)
02/07/11 10:41 PM
Re: Harness Bar!

How much for one shipped to Australia? VICTORIA? 3171

number3
(Senior Member)
02/08/11 06:07 AM
Re: Harness Bar!

Quoting boostdtalon:

When are these shipping. Went back over the pages and didn't see a date?




This week. I am waiting on the cardboard to ship them in. I got a Fedex tracking number from the supplier the other day so it is on its way.


number3
(Senior Member)
02/08/11 06:30 AM
Re: Harness Bar!

Quoting bazeng:

How much for one shipped to Australia? VICTORIA? 3171




Your total is $940.00.

Thank you.


Brunoboy
(Jesus Clips)
02/08/11 03:03 PM
Re: Harness Bar!

payment sent.

**DONOTDELETE**
(Unregistered)
02/09/11 10:12 AM
Re: Harness Bar!

Payment sent.

jepherz
(Too Clean)
02/09/11 11:04 AM
Re: Harness Bar!

How about 66203, Harry?

**DONOTDELETE**
(Unregistered)
02/10/11 11:26 AM
Re: Harness Bar!

How much to 92335?

Thanks


FCR
(Beware Car stops suddenly for parts by the road)
02/10/11 05:04 PM
Re: Harness Bar!

How much for 32725? Thanks

number3
(Senior Member)
02/10/11 07:20 PM
Re: Harness Bar!

Quoting jepherz:

How about 66203, Harry?




$224.00


number3
(Senior Member)
02/10/11 07:21 PM
Re: Harness Bar!

Quoting geno:

How much to 92335?

Thanks




$242.00


number3
(Senior Member)
02/10/11 07:23 PM
Re: Harness Bar!

Quoting FCR:

How much for 32725? Thanks




$212.00

thank you.


Jesh
(Member +)
02/11/11 12:45 AM
Re: Harness Bar!

Price to 99669? Thanks

number3
(Senior Member)
02/11/11 06:40 AM
Re: Harness Bar!

Jesh

Price to 99669? Thanks


Your total price is $370.00

thank you


number3
(Senior Member)
02/11/11 06:45 AM
Re: Harness Bar!




**DONOTDELETE**
(Unregistered)
02/11/11 12:06 PM
Re: Harness Bar!

any update on when these are shipping?

number3
(Senior Member)
02/11/11 12:54 PM
Re: Harness Bar!

They are shipping.

**DONOTDELETE**
(Unregistered)
02/14/11 11:54 AM
Re: Harness Bar!

Quoting number3:

Quoting geno:

How much to 92335?

Thanks




$242.00





Payment sent! Free bump for quality!


number3
(Senior Member)
02/15/11 05:59 AM
Re: Harness Bar!

Shipment of these will resume in a few days. Something has come up, sorry. Everyone should start to see them arrive by the end of this week into next.

Chim55117
(Lopey)
02/17/11 02:58 AM
Re: Harness Bar!

Estimate on one with shipping to 55117?

number3
(Senior Member)
02/17/11 06:20 AM
Re: Harness Bar!

Estimate on one with shipping to 55117?


Chim55117
--------------------------------------------------------------------------------

$220.00


spooling92vr4
(Yeah Toast! * Now with JELLY!!!)
02/18/11 04:53 PM
Re: Harness Bar!

Harry I sent you a pm about my bar, I wont be able to shoot down there to grab it and was wondering if you could ship it up to me. my zip is 11554

number3
(Senior Member)
02/19/11 04:31 PM
Re: Harness Bar!




I took this picture last week.

They should be hitting door steps very shortly.

I have two left at the price. The next batch (they will be made in the few weeks) will be $250.00 plus shipping, etc. That is still less than they were years ago but I am loosing my shirt at $165.00.

Thank you everyone! Keep spreading the word.


PolskiVR4
(Will take advange of children for carbon fiber)
02/20/11 05:07 PM
Re: Harness Bar!

Price shipped to 60439?

tsiboy
(has one ambihelical hexnut)
02/20/11 05:27 PM
Re: Harness Bar!

price shipped to 90031??

number3
(Senior Member)
02/20/11 08:46 PM
Re: Harness Bar!

Quoting PolskiVR4:

Price shipped to 60439?




$218.00 if you are next and last to send money.


number3
(Senior Member)
02/20/11 08:48 PM
Re: Harness Bar!

Quoting tsiboy:

price shipped to 90031??




$245.00 if you are next and last to send money.


tsiboy
(has one ambihelical hexnut)
02/20/11 09:48 PM
Re: Harness Bar!

paypal sent

number3
(Senior Member)
02/21/11 08:28 AM
Re: Harness Bar!

I am going to lock this and start a new thread. The first batch flew out of the shop.

thank you guys.



Contact Us | Privacy statement GalantVR-4.org

Generated in 0.019 seconds in which 0.004 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page