broxma
(retard monkey strength)
03/11/10 10:17 AM
FS: Big Time Brox's Massive Parts Clearance.

I'll be updating this single thread instead of making multiple threads from now on. I will accept offers on alot of the parts. Some parts I have no play with at all in the price. The prices do not include shipping. PM me with any questions or offers. Parts are located in Texas so shipping will be calculated from there for reference. Thanks for looking and I will update this post with any new items.

1. ACT 6 Bolt Flywheel, brand new surface - 150.00
2. Dodge Intrepid Coils(4) - 30.00
3. 92 Galant Tail light, Passenger side - 40.00
4. 2G MAS Pigtails - 5.00
5. 1st Gen 4 piston Dodge Stealth Front Calipers - 100.00
6. Cam Angle Sensors - 25.00
7. 5 lug Front Vented Rotors for 2 piston Brakes - 50.


ACT 6 Bolt Flywheel, brand new surface - 150.00

I bought this to use in place of my Findanza aluminum flywheel only to find out the 1G ACT flywheel will not fit inside the 2G bellhousing. I had it surfaced already however. The total off the top was 7 thou, which was also cut off the pressure plate standoffs to ensure even height. I bought it needing a surface for 100, paid 65 to get it surfaced, my loss, your gain.





Dodge Intrepid Coils (4) - 30.00

I have several sets of these. I have tested the primary coils with my Fluke and I only kept the ones which came back good. They will come with the pigtail.



92 Passenger taillight. - 40.00



Pulled for someone who eventually did not need. No cracks.


2G MAS Pigtails - 5.00



Have 2 of them. One is from the Actual MAS , one is from an ignitor. Same clip though.



Dodge Stealth 4 Piston Front Calipers - 100.00

I am dropping the price on these. This is what I paid for them.





The yellow appears to be a factory color oddly enough. I may be able to bead blast the factory coating off so the buyer will have a fresh surface to paint.
These are 1st Generation Calipers. Brackets can be bought at TunersNation.

Cam Angle Sensor - 25.00



Have 3 of them. 2 on the left known good. I'll have to test the right one but I have no reason to doubt it.

5 lug Rotors for stock brakes (5 lug swap) - 50.00 pair



Purchased for dual piston conversion 1G. They have about 30 miles on them. I can get them surfaced again if desired but it isn't really necessary. Same rotor needed for GVR4 5 lug swap. Purchased from RRE I believe. Price drop on these to get rid of them. They will fit in a large USPS flat rate box so shipping will be 14ish.

Thanks for looking.

/brox


turbofoxlx
(Junior Member)
03/11/10 10:47 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Hey, dibs on the tail light center section! Please let me know whats the best you can do shipped to Miami, Fl 33155.
Thanks,
Mario


solidviper89
(Patty Purex)
03/11/10 10:47 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Inlets on the IC?

NVM I found size in link... Can we work something out? Did that 3gmas work?


broxma
(retard monkey strength)
03/12/10 04:49 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Please keep the following in mind from now on:

5. You are limited to 1 "bump" of your thread per week (a bump is replying to your own post with the specific purpose of moving it to the top of the post list). If you insist on bumping your thread all the time it will be locked. Please give everyone else with posts that have interest and activity their rightful place.

Thanks.

John



broxma
(retard monkey strength)
03/19/10 02:29 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

So this is my weekly allowed bump then.

/brox


paiutey
(Member)
03/20/10 01:56 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Do you know if the intercooler will fit easily?

broxma
(retard monkey strength)
03/20/10 04:54 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

I didn't purchase it specifically for the GVR4 however given the projected dimensions of the intercooler I am going to use on my own car, I can't see how this wouldn't fit. It is not as tall as the Evo 8 intercooler and about the same length. Again, given the success rate of Evo 8 intercoolers mounted to GVR4's, I can't imagine this not being an easy fit.

/brox


mko
(Newbie)
03/21/10 11:53 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

pm sent

524of1000
(Crossed Member)
03/25/10 08:36 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

negotiate on some parts?

broxma
(retard monkey strength)
03/26/10 03:44 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

what do you need Steve?

broxma
(retard monkey strength)
04/04/10 08:37 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Since it has been a good long while and no one checks back on page 9, I'll go ahead and perform my weekly movement to the visible page so that others may in fact have a chance to view items I have offered for sale. It is with deep regret that these items still reside in my possession yet my undaunted courage in offering them has not yet faltered. Items which have been sold have been marked as sold and subsequently removed and items which have been shipped have subsequently been marked as shipped. I feel this is the only rational discourse in this matter and will consider this matter resolved.

/brox


524of1000
(Crossed Member)
04/06/10 12:59 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Still got those tb's huh? I'm suprised no one has picked up the headlights OD the IC. Thats a damn fine IC core

524of1000
(Crossed Member)
04/09/10 08:49 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Any more cool stuff to post?

broxma
(retard monkey strength)
04/09/10 10:08 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

working on it. The car turned over tonight but did not start so once I see what I have left over I'll be updating. If I get a chance next week, I am taking the calipers down to bead blast them for paint.

/brox


**DONOTDELETE**
(Unregistered)
04/10/10 02:44 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

need that 2g mass plug check pm

524of1000
(Crossed Member)
04/14/10 11:34 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

I sent someone over to this for sale page for something, but I forgot who and what. Damn my brain.

524of1000
(Crossed Member)
04/19/10 11:15 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

It was the 5 lug swap...

broxma
(retard monkey strength)
04/29/10 08:47 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Many moons since a bump. I have some more stuff to add which I'll get to in just a bit.

/brox


broxma
(retard monkey strength)
05/09/10 06:01 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

Hello.

/brox


**DONOTDELETE**
(Unregistered)
05/09/10 10:29 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Do you still have the headlights for sale and if so how much shipped to 80104

broxma
(retard monkey strength)
05/09/10 11:51 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

I do. I shall have a shipping quote for you tomorrow but I'd guess around 15.00 to Castle Rock.

/brox


524of1000
(Crossed Member)
05/10/10 12:11 AM
Re: FS: Big Time Brox's Massive Parts Clearance.

LOL. I almost forgot this existed!

524of1000
(Crossed Member)
05/25/10 10:15 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

hory cow! found this at page 8! Buy people, Buy!

broxma
(retard monkey strength)
11/10/10 08:01 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

I have not bumped this in many months.

I feel I deserve to do so.

/brox


alansupra94
(Excuse the retarded question.)
11/10/10 09:50 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Those calipers are tempting!

What rotors and pad setup would you recommend with them?

Thanks,
Alan


broxma
(retard monkey strength)
11/10/10 10:29 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

They need 2nd gen 3000GT rotors and Tunersnation brackets. You'd have to ask Garfield for specifics. The biggest issue of course being the wheel clearance. I run Evo 9 wheels but the Mistu calipers have a raised logo which these do not.

That is of course for a 5 lug. For a 4 lug setup I haven't the slightest idea.

/brox


alansupra94
(Excuse the retarded question.)
11/10/10 11:21 PM
Re: FS: Big Time Brox's Massive Parts Clearance.

Oh craps I forgot that I am on 16s. Never mind


Contact Us | Privacy statement GalantVR-4.org

Generated in 0.003 seconds in which 0.001 seconds were spent on a total of 4 queries. Turbo powered.


Hertz's Galant VR-4 Page