The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

WTB: Need Electrical Connectors

4g6Tree

Active member
Joined
Jul 7, 2014
Messages
44
Location
Salem, VA
Doing some rehab on #77 and need a few connectors preferably with at least a few inches of wire left on them.

Basically I need a connector for the the CAS and all sensors and switches on the thermostat housing.

• 6 bolt CAS connector
• A/C Coolant Temp Switch connector ( the one on top of the thermostat housing)
• Engine Coolant Temp Sensor
• Engine Coolant Temp gauge unit
 

4g6Tree

Active member
Joined
Jul 7, 2014
Messages
44
Location
Salem, VA
That's a good link, I found the CAS connector. But I can't seem to find the other coolant temp sensor/swtich connectors. Mine connectors are long gone so I'm not entirely sure what they look like, or what series they are.
 

iceman69510

Turn Right Racing
Staff member
Joined
Mar 5, 2001
Messages
10,964
Location
Michigan
I think you need at least these:

coolant temp

single pin sensor

This one MAY be able to be modified (keying of connector is different) to fit the a/c temp sensor on top of the thermostat housing.

ac temp
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top