The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

WTB: drive shaft center carier/bearing

PreskitVR4

Well-known member
Joined
Jun 28, 2008
Messages
272
Location
Prescott, Northern AZ
go to the dealership. thats not really a part you will find used. that is a pressed fit bearing, most of the time those come apart in many pieces.
 

transparentdsm

Well-known member
Joined
Jul 27, 2011
Messages
3,690
Location
Cherry Hill, NJ
you can get a nice rebuild kit for a 1g dsm from jnz tuning here i a link click 300 bucks i think. best price you'll find. plus if your changing the carrier bearings you might as well do all your u-joints because they are just as old. also if you doing this to get rid of the wub wub noise, check the balance on your rear tires first and also check your wheel bearings.
 

transparentdsm

Well-known member
Joined
Jul 27, 2011
Messages
3,690
Location
Cherry Hill, NJ
here is the how too click then go to drivetrain scroll to the bottom and click the U-Joint/Carrier Bearing Drive Shaft Rebuild link and it will do a step by step for you.
 

turbophein

Well-known member
Joined
Feb 17, 2009
Messages
683
Location
mass
i have a whole driveshaft with a new carrier bearing installed, never used after that

$150 for the whole driveshaft
 

nrvous

Well-known member
Joined
Apr 16, 2003
Messages
308
Location
Penfield, NY
I have 2 carrier bearings and I believe all of the factory bushings to mount them. $80 you get it all.

forsale_carrierbearing_5206.JPG


Stephen
 

Terry Posten

Well-known member
Joined
Dec 16, 2003
Messages
9,009
Location
Davenport, Iowa USA
I will take the bushings if the original poster does not want those..
 

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,291
Location
MD
I need one of those bearings. If still available, pm shipped price to 17268. Thanks
 

nrvous

Well-known member
Joined
Apr 16, 2003
Messages
308
Location
Penfield, NY
The bearings are off the market. They sold this morning. Thank you.
Stephen
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top