turbophein
Well-known member
lost compression in cyl #1. i pulled the head the other day. the cyl walls look great.
so i plan on throwing some new NPR piston & rings in the motor, with some acl rod bearings and a oem headgasket.
parts should be well under $200 easily. pistons are $90, headgasket $55, acl's $20, exhaust mani gasket $22
so today i am going to pull the exhaust completely, pull down the TC and drop the driveshaft, pull the oil pan, and remove the rods and pistons.
then do a quick hone, and reinstall everything!
if someone has done this and has any tips for me, that would be awesome!
should be a decent rebuild when done!
so i plan on throwing some new NPR piston & rings in the motor, with some acl rod bearings and a oem headgasket.
parts should be well under $200 easily. pistons are $90, headgasket $55, acl's $20, exhaust mani gasket $22
so today i am going to pull the exhaust completely, pull down the TC and drop the driveshaft, pull the oil pan, and remove the rods and pistons.
then do a quick hone, and reinstall everything!
if someone has done this and has any tips for me, that would be awesome!
should be a decent rebuild when done!