thinking of grabbing a built 2G automatic to swap parts over to my gvr4. I am trying to figure out what I will be able to use. I have LOTS of reading and learning to do, as well as tools I need to buy. I basically have no hands-on experience with cars. However, I've been reading heavily on forums since 2005 and feel like I know more then the average mechanic, at least about these cars. I think I will save some parts, sell some parts individually, and then sell the 2g roller with some stuff left in it. if you have any advice please let me know but I am mainly making this thread as a resource for myself (for part numbers and prices specifically) and maybe it will help someone in the future. /ubbthreads/images/graemlins/smile.gif
1. transmission swap... want to convert the GVR4 to automatic so I will be taking the transmission, transfer case, and all parts necessary to swap. first will send 2g transmission to IPT and have the works done to it... billet converter, ratchet shifter, TCU, etc.
2. engine head... I think I will hold on to this 2g head so that I can do some back-to-back testing with my 1g head eventually. If the 2g head is built with cams/intake manifold/etc... I will throw it all on the VR4 and hold on to my 1g head for later since my 1g head isn't built with a stock intake mani.
3. turbo setup... On the GVR4 i have a ported e316g and ported 2g manifold. If the 2g has an upgrade from this, I will throw it on the VR4.
I think I should hold on to the 16g just in case i need to break in a new motor one day or the bigger turbo blows.
4. bolt ons... I could use an oil catch can setup, a FPR, FP Gauge, Oil Pressure Gauge, EGT Gauge, fuel injectors larger than 550, speed density sensors, small battery, remote starter, fuel pump better than an evo9, coil on plug, meth injection, slim fans, ebc,
5. rims.. could use a nicer set of rims so this would be a bonus. I am currently 4 lug but if I do a 5lug swap, is it the same lug pattern as the 2g? Will I be able to use the 2g's rims?
this would leave me with the following stuff for sale... do you think any of it is worth saving just in case I may need it? going to update this list over time as I figure out the average going price for this stuff just because I am trying to estimate the cost of this project.
from the 2g:
7 bolt block... I know i won't need this...
roller with suspension, rear lsd, driveshaft, ... won't need... might part out pieces if worth it
fmic setup....should probably sell this separately from chassis
from my vr4:
1g turbotrix recently rebuilt transmission with 4spyder center and evo3 taller 5th gear..
1g transfer case.....
act 2600 w/ streetlite disk....
VR4 short throw shifter....
stock vr4 rims...
aftermarket vr4 rims...
more to come as i think of it and search the answers to my own questions. /ubbthreads/images/graemlins/smile.gif