The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Tension accessory belt

veganbutcher

Well-known member
Joined
Apr 21, 2012
Messages
71
Just re-installed the power steering pump and it needs to be tensioned. Does anyone have a diagram showing where the tensioner pulley is? Also whats a good way of making sure you have the correct tension without a calibration tool.
 

EHmotorsports

Well-known member
Joined
Sep 25, 2012
Messages
1,278
Location
Beaverton
There are no tensioner pulleys for the PS. There are slots where the ps pump bolts to the bracket. 1/4 movement of the belt is plenty of tension.
 

veganbutcher

Well-known member
Joined
Apr 21, 2012
Messages
71
Quoting turbowop:
Crap, I lied. There aren't two upper bolts, there are only two lower bolts. Sorry.



Lol that's what I thought, I was also considering using a nut on the other end of the PS pump but there isn't enough clearance for that.
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top