The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

T-stat wiring help

dsm10o0

Well-known member
Joined
Jun 16, 2010
Messages
680
Location
San Jose CA
Hi, just got my galant and this is my first one. I wiring needs help and I'm changing out the crusty old broken wires and connectors. They were all cut and I don't know where they go.


Colors of wires I need to find.

2 wires = green/black and green/red

1 wire = blue (coolant temp sensor?)

1 wire = yello/red

2 wires yello/green


Thanks for the help.
 

Struc

Well-known member
Joined
Nov 24, 2008
Messages
764
Location
Oconomowoc, WI
A little searching is a good thing. I've posted this at least 5 times already.

Blue/Black, single wire sensor, A/C Condenser Fan, Normally open
Green/Red and Green/Black, 2 wire sensor, A/C Clutch lockout, Normally closed
Green/Black and Yellow/Green, 2 wire sensor, ECU Temperature sensor, variable ohm reading
Yellow/Green, single wire sensor, Cluster temp gauge, variable ohm reading.
 

dsm10o0

Well-known member
Joined
Jun 16, 2010
Messages
680
Location
San Jose CA
Last question, where does the other single wire? 2 wire on top, 2 wires on bottom, 1 for the temp sensor, then the other?
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top