The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

SOLD: 1992 Galant VR4(199-623/1000) $3,300 - Bradenton FL

Status
Not open for further replies.

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
$3,500 - Willing to trade for Jeep Cherokee 4 Door 4WD OR 1G-2G Auto AWD/FWD

I have had the car for 3 years now, and I have loved every moment of it. I daily drive this car, and it just made the 1500 mile trip from NY to FL with out a single issue. Other then getting 35 MPG and not breaking the bank on fuel costs.

With in the past few weeks its made many trips to Tampa and also to Orlando (110 miles 1 way)

The Original badge number was 623/1000. Her interior was needed help. Center council was busted seats were ripped and all in all. Not up to my standards. I picked up 199/1000 as a non running parts car. The dash was in much better shape, and so was the front seats and center council. I switched dashes and since I had both badge and matching fob for 199 I left it on there. Due to hard times and unemployed I let badge number 623 leave my hands. Everyone can hate me but I made 1 good car out of 2.

The Shell has 161,XXX I drive it daily so miles will change
There is a Hallman pro MBC on it set @ 15 psi

Engine:
ARPs
OEM Mitsu head gasket
BS Elim
40k on water pump and T belt.
Wiseco Pistons
1G rods
Bored .50mm over
Done in October of 2004.
ACT 2100 pressure plate - Excedy clutch disc

Whats been replace in the last few months:
Outer tie rods
Right front inner tie rod
Sway bar links
Left front control arm
Radiator
2 new 10 inch slim fans

AC does now work, No leaks. Blows out @ 48 degrees

Transmission shifts smooth

All pictures are current as of today

Exterior is a 8 out of 10. It needs a hood and a R/F fender. It was in a accident (minor) before I got her. The hood came off 199 and is rusty. I installed new hood pins to hide the rust
document4.jpg


document5.jpg


There is some very minor surface rust on the L/F fender by the door
document1.jpg


The drivers door I believe will need some hinges. It doesn't line up 100% with the rear door.
document3.jpg


Here are some more general pictures.

IMG-20110626-00038-1.jpg


IMG-20110626-00037-1.jpg


IMG-20110626-00036-1.jpg


IMG-20110626-00035-1.jpg


IMG-20110626-00034-1.jpg


I have installed a FMIC, I got it for free and didn't leak. Painted it flat black and put it behind the bumper. I didn't see myself ruining something so nice.
fmic3.jpg



Engine Bay
IMG-20110626-00040.jpg


Interior: I would give it a 8 out of 10. It needs some sewing on the drivers seat and the passenger side sun visor needs some love

IMG-20110626-00041-1.jpg


The drivers seat has developed a rip. Looks like it can be repaired

document2.jpg


Has the typical TEL shifter inside
l_9a35c887e005c4174cb63b3ff09aa340.jpg


Current interior, need a vacuum.

IMG-20110626-00027-1.jpg


IMG-20110626-00028-1.jpg


IMG-20110626-00029-1.jpg


IMG-20110626-00030-1.jpg


IMG-20110626-00031-1.jpg


IMG-20110626-00032-1.jpg


IMG-20110626-00033-1.jpg


2 Pillar gauge pod with Prosport Boost (mechanical) and Oil Pressure (Electronic)
document7.jpg


JVC CD player, HKS Type O tubro timer. Sorry, the XM wont stay.
document8.jpg


Under body:

IMG-20110326-00047-1.jpg


IMG-20110326-00046-1.jpg


IMG-20110326-00045-1.jpg



The 4 Wheel Steer is still intact and does not leak.

The ABS fuse has been pulled, and light removed for cluster. I started to removed the Electronic component.

The downpipe and "cat" need to be replace. The cat broke off at the flange to the I pipe back. I sleeved the cat and slid it inside the I pipe (temp fix so I can drive it to work and back with out getting bothered because of the noise) Will be fixing it in the next 2 weeks

The right front wheel bearing is starting to make some noise, Not lose just starting to make a rotational noise while driving

I have a clean title on hand!
l_2675929c79a649139d8e9436c22ec87f.jpg


I'm sure I am missing stuff, So just let me know.

Thanks for looking
Cory
 
Last edited:

Turboman_456

Well-known member
Joined
Oct 24, 2009
Messages
80
Location
Glen Burnie MD
Valve cover looks good professionally done not cheesy. /ubbthreads/images/graemlins/cool.gif
 

I think he is in Florida. He said that he made a drive from New York to Florida with no problems.
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Quoting Turboman_456:
Valve cover looks good professionally done not cheesy. /ubbthreads/images/graemlins/cool.gif

Thanks,I did it one day because I had it laying around. Turned out well.

Coreyc123, I live in Florida now. Car still has NY plates on it and a NY Title.
 

atc250r

Staff member
Joined
Sep 11, 2003
Messages
13,235
Location
Orange County, NY
Please add a location to title as per the rules or the ad will be removed.

Thanks.

John
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Weekly bump, Trying to get rid of this so I can start a new project I have in mind. Still 4G63 powered of course.
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Weekly Bump, I would like to see this car gone. Debt needs to get paid off so I can start over. Toss me an offer
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
I need the car gone, After a trip to Orlando this afternoon the ACT failed 3 miles from my Apartment. I will take a reasonable offer. I have another clutch and PP to put in it, But if someone wants it before I toss the new clutch in it, Take it and I will leave the other clutch in the trunk. Its just a OEM replacement style.

Looking to get $3,000 OBO at this point. Needs clutch, PP, Plugs and a Knock Sensor (logging phantom knock)
 

stealthtt24

Well-known member
Joined
May 24, 2005
Messages
2,746
Location
Orlando, FL
Plugs and a knock sensor are nothing. Sounds like the car just needs some preventive maintenance. Great deal, glws.
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Quoting stealthtt24:
Plugs and a knock sensor are nothing. Sounds like the car just needs some preventive maintenance. Great deal, glws.


Thank you for the kind words. I will be ordering all of that from my buds @ STM on Tuesday.
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Transmission and Clutch have been fixed
 
Last edited:

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Its been a few weeks, Car is back to DD Status. I finshed up fixing the transmission and replacing the blown up ACT disc with a new Excedy disc I had from a past part
out.

Looking to get $3,500 - OBO. Car is going to get cleaned and detailed this week after being pushed around the shop for the past 3 weeks. Will post pictures after that happens.
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
New Year, and I am still looking to get rid of the Galant. Nothing has changed just installed a new slave cylinder that was leaking. I have driven it to Tampa and back a few times and she is looking for a new home.

$3,500 OBO, Will consider trades for a 1G AWD plus a little extra cash.

Thanks for time,
Cory
 

Lets get a little bump for Cory, BUY ME IM A GALANT /ubbthreads/images/graemlins/ooo.gif
 

bmxkid415

Well-known member
Joined
Jan 27, 2008
Messages
204
Location
Bradenton FL
Adam, Never got your PM. I sent you a PM though.
 
Status
Not open for further replies.
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top