The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Nate Crisman: #418/2000

NateCrisman

Well-known member
Joined
Nov 22, 2008
Messages
2,054
Location
Blairstown, NJ
10sec%20gvr4.jpg


#418/2000 - 1991 Galant VR4 - no sunroof. Nile Black paint covered with Silver vinyl wrap.

Currently my daily driver & fun toy dragstrip project. It's still a work in progress, and needs lots of misc fixes and attention, but it's pretty quick and isn't JSB.

Some random photos:

14089485_10154381053252777_1997602580_n.jpg


IMG_4050-L.jpg


Left windows open in the pits at the shootout on saturday when the monsoon season came to ohio:
IMG_4044-L.jpg


IMG_4052-L.jpg


The quickest time-slip I have (Island Dragway tore up my 10.9 slip as they were kicking me out for no roll-bar)...the difference being a solid 60' (probably like 1.625 on the 10.9 vs this 11.2 on a 1.816.
IMG_4085-L.jpg


sloppy installation, but here is where the magic happens. Currently running an M10 nozzle with 100% methanol. It's the difference between 113mph trap @ 26psi with the knock sensor going nuts vs 35psi with nice datalog making 129mph passes.
IMG_3866-L.jpg


crappy cell phone engine bay pic
IMG_3692-L.jpg
Modifications:
Engine:
Manley Piston & Rod 2.0L (not wonderful compression 165/165/135/135)
1g head & BC272/272 Cams (head is probably "built" but Im not sure)
MLS HG & ARP headstuds.
Balance shafts removed.
90 Water pipe
Evo3 aluminum radiator
Aftermarket fans
Prothane engine mounts


Exhaust:

FP exhaust manifold
FP 3" recirculated Vband o2 housing
Tial MVS 38mm Vband external gate
FP 304SS cast turbine housing (for T3 turbine wheel)
CM 3" Stainless turboback exhaust


Intake:

4" aluminum intake pipe with K&N filter
FP3176HTA turbo - journal bearing T3 turbine wheel
ETS fmic core 28"x10.5"x3.5 - custom end tanks
2.5" aluminum custom ic pipes & TB elbow
1G BOV - modded to seal at big boost


Fuel:

Devils Own Meth Injection - BASIC BARE BONES - dsmlink activated straight on/off - M10 nozzle - straight meth fuel.
750cc FIC Injectors
Walbro 255hp fuel pump
Aeromotive FPR
-6 stainless braided fuel feed line (using stock return line)
-6 billet fuel filter


Electronics:
DSMlink V3 Full
Omni 4bar map sensor and GM Air Temp sensor.
14point7.com - wideband o2 sensor.
DSMlink boost control solenoid
NGK wires & NGK BR8ES plugs at .018"
Glow shift boost/oil pressure/water temp combo gauge (DISCO LIGHT SHOW!)
Optima red top battery relocated to trunk


Drivetrain:
Unknown tranny rebuild
ACT2600 Clutch
ACT chromoly flywheel
SS clutch line
4bolt DSM rear


Suspension & Brakes:
KYB AGX shocks
Ground Control coil over kit - 550/450lb 6" springs
4WS, front swaybar removed


Interior:
Aftermarket steering wheel
1G DSM Shifter Assembly with solid mount bushings.
2G DSM shift knob
Baby seat in the back


Exterior:
Silver Vinyl Wrap
JDM bumpers & foglights
92 VR4 Grill
92 VR4 Taillights - wrapped black
Lightweight bumper cover brackets F&R
Enkei 17x7" wheels
ARE 15" wheels (dragstrip only)
M&H 23x7x15 slicks (dragstrip only)



Misc
Recovering the driver mod
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top