The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Koni Inserts For KYB AGX's : Use 1G DSM Inserts?

BluFalcon

Well-known member
Joined
Jan 20, 2002
Messages
1,312
Location
Wichita, KS
I've got a set of 1G DSM KYB AGX's's with Galant specific H&R lowering springs on my car. The fronts are blown (again) and i was thinking about going with Koni Yellows for the fronts, using the AGX strut bodies. I can't find Galant specific Koni Yellow inserts for the VR-4 anywhere, but they still offer them for the 1G AWD's. Since the 1G DSM AGX's are dimensionally identical to the OEM Galant struts aside from the location of the spring perch, these strut inserts should work on the Galant as well, right? I already have Tein front camber plates, and was thinking of pairing the Koni inserts with a set of Ground Control coil over sleeves. Anyone else running a similar setup?
 

GreenGSX

Well-known member
Joined
May 15, 2005
Messages
681
Location
Rochester, New York
We are using the DSM koni inserts on the One Lap VR4. In fact the entire suspension, minus Curtis's upper rear control arms, came right off my 1992 GSX track car.
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top